Floor Joint Sealing in Lockerley
Sealant work in Lockerley for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, quoted at a fixed price.
- Chipped and spalling edges along forklift routes
- Soft sealant dragged out of trafficked joints
- Unfilled floor joints collecting dirt and grit
Floor joint sealing for businesses in Lockerley
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our floor joint sealing in Lockerley
Not every floor joint we treat is in a warehouse. Shops, showrooms and trade counters have joints that take trolleys, foot traffic and scrubber-driers, and an open, grimy joint line looks poor as well as catching wheels. A flush, well-finished joint tidies the whole floor. We work on retail and showroom floors, construction joints and forklift and pallet-truck routes, and the usual reasons a site gets in touch are joint edges breaking up under truck wheels and open saw cuts full of debris. A specialist sealant contractor works differently from a general builder: on jobs in Lockerley, preparation and product choice get the time they need.
Halls, schools and small commercial buildings near places like Lockerley have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Where
- Lockerley (SO51)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Where floor joints take the most wear near Lockerley
Lockerley sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
For an estate such as Romsey Community Hospital, 4.9 miles south-east of Lockerley, the joints in ramps, decks and long building elevations all need attention over time. Parks like Home Farm Business Centre (to the north of Lockerley) combine paved areas, car parks and building elevations, each with joints that move. In a school such as Lockerley Church of England Endowed Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Lockerley is about 5 miles north-west of Romsey, in Hampshire. We cover commercial sites throughout Lockerley. Lockerley is one of 723 places in Hampshire on our list. For work in that direction, see our Southampton page, about 11 miles away.
Business premises anywhere in SO51 are within our area for floor joints. For a building on Butlers Close, Oval Road and Clem's Way or nearby, send details and we’ll quote for floor joints. Sites close to Lockerley are covered too, including Carter's Clay (1 mile south-east), Dunbridge (1 mile east), Mottisfont (2 miles east), Kimbridge (2 miles east) and Awbridge (2 miles south-east). A short drive away, we cover Winchester (11 miles east), Eastleigh (11 miles south-east), Andover (13 miles north), Totton (8 miles south), Chandler's Ford (9 miles east) and Hedge End (14 miles south-east).
Near you in Lockerley
Recent enquiries here include premises near Kings Arms Public House. For rail, the closest station is Mottisfont & Dunbridge station, roughly 1.2 miles east. Well-known places in the area include Romsey Community Hospital (4.9 miles south-east).
Surface by surface
Forklift and pallet-truck routes
Truck routes take traffic all day and the joints on them break down first. A semi-rigid filler is common here because it supports the arrises under hard wheels.
Retail and showroom floors
We plan shop-floor work so trading can continue. Give us your opening pattern and access windows and the phasing follows.
Nearby places to Lockerley
Also in Lockerley
Diagnose, treat, sign off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. For work around Lockerley, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- Zones reopen once cured and the work moves on.
What we need from you
- Let us know about inductions and permits
- Let building users know which areas are affected
- Arrange parking or a loading space
Ask for a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Advice
Maintenance after handover
Problems stay small when the joints are checked regularly. Specifically:
- Let us know what the floor is cleaned with
- Remind operators to lift rather than drag
- Walk the main routes and inspect joint lines on a regular cycle
- Expect fillers on young slabs to need a top-up
We will give you a time before trucks can run over the new joints and it pays to stick to it. Cones or barriers stop the first driver cutting the corner.
Every vehicle on a busy aisle hits a damaged joint. Sorting it early looks after your equipment as well as the slab.
Why it’s worth doing now in Lockerley
Tape, or whatever sealant is in the stores cupboard, may look like a fix for a while. None of it is designed for wheel loads and traffic soon pulls it out. The right filler or sealant saves doing it twice. Older rural buildings around Lockerley move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why clients in Lockerley choose us
- One phone line for London, the South East and Scotland
- Commercial sealant work since 2005
- Constructionline member
- Fully insured
Read our cost guide and our accreditations.
How the quote is worked out
Quotes vary with the job. It mainly depends on:
- Which sealant the job calls for
- Removal of failed or old sealant
- Phasing around occupants
- Any access equipment needed
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
What we need to price the job
Diagnosis starts before we arrive. Let us know:
- Photos of the joints, close up and from further back
- Access details, including height
- Whether the building will be occupied during the work
- The product your specification calls for
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, call 01277 525 020 or send details through our quote form.
Your questions answered
Do you take on work at healthcare sites like Romsey Community Hospital?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Can you work at a site such as Home Farm Business Centre, by Lockerley?
Yes. We cover Lockerley and the area around it, including industrial estates, business parks and retail parks such as Home Farm Business Centre. Send details of the unit and the work through our quote form for a quick quote.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators, which many sites require.
What information helps you price floor joint sealing?
Approximate metres of joint, photos of typical and worst areas, and a floor plan are typically enough for a quick quote. We can visit where that helps, and you can phone 01277 525 020 or use the quote form to arrange it.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Do you repair broken joint edges?
Edge condition is recorded when we look at the floor. Damaged edges are flagged up front, so nothing is filled that won’t hold.
When it isn’t the sealant
We check first that sealant really is the fix. It won’t put right:
- A floor that is out of level for the racking or trucks
- A floor that rocks at the joints, which needs a structural fix
- Worn screed or surface finishes
If you are not sure, just give us a call on 01277 525 020 or email a schedule or drawings and we will give you a straight answer.
Surfaces we seal
- Saw-cut induced joints
- Forklift and pallet-truck routes
- Joints along racking aisles
- Construction joints
- Loading bays
- Retail and showroom floors