Industrial and floor joint sealing in Broomfield, Kent
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Broomfield and the surrounding area. Send photos or drawings for a fixed quote.
- Filler that has parted from one face
- Sealant pulled out along a truck route
- Grimy joint lines spoiling a showroom floor
Floor joint sealing near Broomfield
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Common problems we fix in Broomfield
Pallet-truck and forklift wheels concentrate weight on a tiny contact patch. Where a joint is open, the wheel dips and strikes the far edge, and repeated impacts break the concrete away.
Most enquiries start with something like this:
- Broken arrises where pallet trucks cross
- Scruffy, dirty joint lines on a shop or showroom floor
- Cracked and crumbling joint fill
- Dock area joints that have failed first
For a school such as Leeds and Broomfield Church of England Primary School, playground and building joints can be done in the holidays.
Comparing quotes
- Whether their applicators hold CSCS cards
- Which product they’ll use, and why it suits the joint
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Do they follow the manufacturer’s priming guidance?
Floor joint sealing in Broomfield, done properly
Mastic Doctor has worked on joints in commercial buildings for over 20 years. Our CSCS-carded applicators follow your site induction and rules, and the business is CHAS accredited and a Constructionline member, with public liability insurance in place. Completed joints come with a 12-month guarantee on our workmanship. We work on forklift and pallet-truck routes, construction joints and saw-cut induced joints, and what we’re called in for most is old filler gone hard, cracked or loose and drivers complaining about joints on a route. Facilities teams, main contractors and managing agents in Broomfield tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For a site near Broomfield, measurements and photos up front mean one trip where possible, with the right materials on hand. Tell us the joint widths if you can, and what drives or walks over them.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Broomfield (ME17)
- Region
- Kent
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Your questions answered
Is a hospital such as KIMS hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can you work at a site such as Roebuck Business Park, by Broomfield?
Yes. We cover Broomfield and the area around it, including industrial estates, business parks and retail parks such as Roebuck Business Park. Send details of the unit and the work through our quote form for a quick quote.
Are you CHAS accredited?
Yes. We’re CHAS accredited and a Constructionline member.
Why is there a gap next to the joint filler?
Separation typically comes from slab shrinkage, poor preparation or the wrong product. We diagnose the cause before suggesting a fix.
Can you phase floor joint work around operations?
We phase it. Areas are taken out of use a section at a time. Tell us your site hours and access windows and we will plan around them.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What happens if the joint edges are damaged?
A filler needs sound edges to grip. We’ll tell you if the joint edges need repairing first and set out how that affects the job.
Other services in Broomfield
When to bring in a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Smaller jobs around Broomfield can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
Before we start on site
- Tell us what induction or permit system the site runs
- Send asbestos survey details if the building is pre-2000
- Point out parking and an unloading spot
Getting a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to give us a call on 01277 525 020 or use the quote form.
Read more
What happens if it’s left?
Dirt and spillage gather in open joints, out of reach of the floor cleaner. Where the floor is on show or needs to be kept clean, that is a problem. Flush, filled joints leave nothing for cleaners to dig out. Converted and older buildings near places like Broomfield tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
What a job costs comes down to how many linear metres there are, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.
Why us?
- Commercial sealant work since 2005
- Old sealant cut out, never sealed over
- One contact handling all your sites
- CSCS-carded applicators
See our cost guide or how we’re accredited.
Where floor joints take the most wear near Broomfield
Central London is about 36 miles from Broomfield. Warehousing clusters around the motorways that ring and radiate from London, and their floor joints take forklift and pallet-truck traffic all day. Rainfall across the South East, Broomfield included, is lower than in many parts of the UK. External slab and deck joints still need a dry, clean joint to seal, and where de-icing salt is spread in winter, open joints let it in.
Campuses like Canterbury Christ Church University, 2.5 miles to the north-east of Broomfield, mix old and new buildings, with movement joints wherever they meet. For buildings at a park such as Roebuck Business Park, 1.6 miles east of Broomfield, brick and panel movement joints are easy to forget until one leaks.
Broomfield is about 5 miles east of Maidstone, in Kent. Across the ME17 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 931 places in Kent, from busy centres to rural villages. For work in that direction, see our London page.
Anyone looking for floor joint sealing in ME17 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Sites close to Broomfield are covered too, including Chegworth (1 mile east), Ashbank (1 mile north-west), Kingswood (1 mile south), Eyhorne Street (1 mile north) and Leeds (1 mile west). Nearby towns on our patch include Maidstone (5 miles west), Ashford (12 miles south-east), Sittingbourne (8 miles north-east), Faversham (12 miles north-east), Minster (14 miles north-east) and Kings Hill (10 miles west).
Around Broomfield
Locally, jobs take us to sites close to The Park Gate Inn and the streets around them. Broomfield’s nearest station is Hollingbourne station, about 1.6 miles north. Nearby you’ll also find Leeds Castle (under half a mile north-west) and KIMS hospital (4.5 miles north-west). For a walk, there’s Detling Hill.
Different surfaces, different methods
Loading bays and dock areas
At loading bays, product choice has to suit the loads, the temperature and the wet. Phasing is planned around your delivery schedule.
Saw-cut induced joints
A sawn joint left open soon packs with debris and chips at the edges. Filling them early keeps them tidy and protects the edges.
Commercial clients in Broomfield
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so the building keeps working while we do.