Industrial and floor joint sealing in Borden, West Sussex
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Borden and the surrounding area. Send photographs or drawings for a fixed quote.
- Failing joints at loading bays and dock doors
- Old filler gone hard, cracked or loose
- Grimy joint lines spoiling a showroom floor
Floor joint sealing near Borden
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle floor joint sealing in Borden
For sites in Borden and across West Sussex, the process is short: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. A rough length of joint, photographs of the worst areas and a site plan let us give a quick quote and a visit can be arranged where that is easier. If you have sealant pulled out along a truck route and brittle joint filler breaking up, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Borden, preparation and product choice get the time they need.
Around smaller places such as Borden, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Work we carry out in West Sussex comes with a 12-month guarantee. If an installation problem shows up, call 01277 525 020 or send details through our quote form and we’ll arrange a return visit.
- Location
- Borden (GU30)
- Wider area
- West Sussex
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
FAQs: Borden
Is Borden too far out for you?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Is hospital work, at somewhere like Midhurst Community Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
How long does a job like this take?
It depends on the scope, though a typical visit usually takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. For bigger or phased jobs, we’ll set out a timescale with the quote.
Does the weather affect the work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Do you guarantee industrial floor joints?
There is a 12-month guarantee on our workmanship, and we hold public liability insurance.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Will you just go over the old sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong usually costs more in the end than doing them right.
Diagnose, treat, sign off
Before we leave any area, we remove the tape, clean down and inspect every joint, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Smaller jobs around Borden can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- Zones reopen once cured and the work moves on.
Preparing the site
- Let building users know which areas are affected
- Have the specification and drawings to hand
- Move anything stored against the joints
Ask for a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or use the quote form.
Read more
Honest limits
Being straight saves everyone time. New sealant won’t cure:
- Uneven floors that need grinding or levelling
- Joint edges that have already broken away, which need repairing before filling (we will tell you if so)
- Wide or random cracking that suggests a structural issue
If you are not sure, just speak to us on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer before you book.
What we seal
- Construction joints
- Retail and showroom floors
- Saw-cut induced joints
- Joints along racking aisles
- Forklift and pallet-truck routes
- Loading bays
Places near Borden
Other services in Borden
Cost factors for floor joints
To price the job, we consider:
- Specialist products, such as fire-rated or hygienic sealants
- The total length or number of joints
- The site’s rules and procedures
- Access and working height
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
Sending details for a quote
The more we know, the firmer the quote. Helpful details to send:
- The type of building and who uses it
- Any dates the work must fit around
- Rough lengths or quantities, or drawings if you have them
- The asbestos register, for older buildings
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to ring 01277 525 020 or send details through our quote form with what you know.
After the work
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Record damaged joints with a photo and a location
- Treat loading bay joints first if they’re failing
- Remind operators to lift rather than drag
- Sweep debris out of open joints until they can be filled
Young concrete carries on shrinking, so some fillers part slightly from one face. That is common and is typically dealt with by topping up once the slab has settled down.
Every day an open joint stays full of grit, the edges take more punishment. Filling it ends that cycle while it is still a straightforward job.
Building owners, agents and FMs in Borden
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Floors, slabs and movement joints in Borden
Central London is about 46 miles from Borden. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital. Rainfall across the South East, Borden included, is lower than in many parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and winter de-icing salt on car parks and ramps works into any open joint.
In and around Borden, the right filler or sealant for each joint depends on the traffic and the movement it takes. Sites like Midhurst Community Hospital, 4.1 miles south-east of Borden, carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Borden is about 5 miles east of Petersfield, in West Sussex. Businesses, contractors and managing agents in Borden can call on us for floor joints. 373 places across West Sussex fall within our area, Borden among them. Portsmouth is covered too, around 18 miles from Borden.
Business premises anywhere in GU30 are within our area. We also cover Trotton Marsh (1 mile east), Rogate (1 mile south-west), Chithurst (1 mile south-east), Milland (2 miles north-east) and Rake (2 miles north-west). A short drive away, we cover Chichester (12 miles south), Portfield (13 miles south), Midhurst (4 miles south-east), Southbourne (12 miles south), Pulborough (14 miles east) and Westergate (14 miles south-east).
Around Borden
For rail, the closest station is Liss station, roughly 3.6 miles north-west of the centre. A little further out are Midhurst Community Hospital (4.1 miles south-east). For a walk, there’s Iping and Stedham Commons and Wheeler's Down.