Industrial and floor joint sealing in Blashford, Hampshire
Work needed on a floor joint in Blashford? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Joint edges breaking up under truck wheels
- A rough ride across broken joints
- Filler that has parted from one face
Floor joint sealing near Blashford
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our floor joint sealing in Blashford
It isn’t only heavy industry. Retail units, showrooms and trade counters have slab joints crossed by trolleys, footfall and cleaning machines, and an open, grimy joint line looks poor as well as catching wheels. A neat, flush fill makes the floor easier to clean and look after. Site teams most often ask us about loading bay joints breaking down and cracked and crumbling joint fill, across saw-cut induced joints, loading bays and retail and showroom floors. Facilities teams, main contractors and managing agents in Blashford tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In and around smaller places like Blashford, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Location
- Blashford (BH24)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
When to bring in a specialist
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
How a job runs
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. For work around Blashford, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Before we start on site
- Share the asbestos register for older buildings
- Point out parking and an unloading spot
- Share your working hours and any access restrictions
Quotes
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
More services for Blashford
Floor joint sealing around Blashford: how the place shapes the job
Rainfall across the South East, Blashford included, is lower than in many parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, while winter salting gets into any joint left open. At least three named trading, business or retail sites lie within about 3 miles of Blashford. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
Schools like Poulner Junior School often have long brick elevations with movement joints that age quietly. Across sites such as Carvers Industrial Estate, 1.1 miles to the south of Blashford, floor and movement joints can be sealed in phases so units keep working.
Blashford is in Hampshire. Businesses, contractors and managing agents in Blashford can call on us for floor joints. Across Hampshire, 723 places are covered, including Blashford. We also cover Southampton, around 17 miles from Blashford.
We take on floor joints across the BH24 postcode area. If your site is on Snails Lane, Ivy Lane and Woolmer Lane or close by, send details and we will quote for floor joints. Nearby places we also cover include Ellingham (1 mile north-west), Rockford (1 mile north-east), Poulner (1 mile south-east), Highwood (1 mile east) and Ringwood (1 mile south). Further afield, our area takes in Totton (13 miles east), Lymington (13 miles south-east), New Milton (9 miles south-east), Barton on Sea (10 miles south-east), Marchwood (15 miles east) and Ashley (9 miles south-east).
Landmarks near Blashford
In Blashford, that means premises near Alice Lisle Inn and Ringwood School Academy. Well-known places in the area include St Leonard's Hospital (4.5 miles south-west). Not far away are Blashford Lakes and Linbrook Lake.
Why deal with it now?
Broken joints shake trucks, stock and operators alike. Wheels and bearings wear faster and loads can shift, which nobody budgets for. A filled joint takes most of that out. For buildings around smaller places like Blashford, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What you get with us
- One contact handling all your sites
- Old sealant cut out, never sealed over
- Workmanship guaranteed for 12 months
- CHAS accredited
See how commercial sealant jobs are priced and our accreditations.
Common problems we fix in Blashford
Older fills harden, shrink and crack with age, particularly where cleaning machines and traffic work it daily. At that point it neither holds the edges nor keeps debris out.
If one of these sounds familiar, it’s time for a closer look:
- Scruffy, dirty joint lines on a shop or showroom floor
- Failing joints at loading bays and dock doors
- Sealant pulled out along a truck route
- Filler that has parted from one face
Business parks such as Headlands Business Park, less than half a mile south-west of Blashford, have car parks, paved areas and long brick and panel elevations, all with movement joints.
Before you book anyone
- How long is the guarantee, and what does it include?
- How they’ll work around occupants
- Which product they’ll use, and why it suits the joint
- Their approach to joint depth and backing
When it isn’t the sealant
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- A floor that rocks at the joints, which needs a structural fix
- Uneven floors that need grinding or levelling
- Wide or random cracking that suggests a structural issue
Not sure which it is? You can call the office on 01277 525 020 or email drawings and photos and we will tell you honestly before you book.
Surfaces we seal
- Loading bays
- Saw-cut induced joints
- Retail and showroom floors
- Joints along racking aisles
- Forklift and pallet-truck routes
- Construction joints
What the job involves on each surface
Loading bays and dock areas
At loading bays, product choice has to suit the loads, the temperature and the wet. Phasing is planned around your delivery schedule.
Construction joints
Day joints vary, with or without armoured edges. We’ll tell you if the edges or any armouring look like they need attention before filling.
Your questions answered
Do you cover business parks and estates near Blashford, such as Headlands Business Park?
Yes. We cover Blashford and the area around it, including industrial estates, business parks and retail parks such as Headlands Business Park. A few photos and the unit address let us price the work.
Is Blashford too small for you to travel to?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Why has the filler pulled away from one side?
On newer slabs, the concrete keeps shrinking after the joints are filled and a stiff filler can separate down one side. A top-up normally puts it right.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Is colour matching possible?
That depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
What happens if old sealant might contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.