Industrial and floor joint sealing in Hangersley, Hampshire
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Hangersley and the surrounding area. Send details for a fixed quote.
- Trucks and loads jolting over damaged joints
- Cracked and crumbling joint fill
- Open saw cuts full of debris
Floor joint sealing for businesses in Hangersley
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
When to call us in Hangersley
Older fills harden, shrink and crack with age, particularly where cleaning machines and traffic work it daily. Once it has gone hard or come loose, it protects nothing.
It’s worth sending us details if you spot any of the following:
- Saw-cut joints left open and packed with grit
- Joint fill separating from the concrete
- Joint edges breaking up under truck wheels
- Sealant pulled out along a truck route
For a school such as Poulner Infant School, playground and building joints can be done in the holidays.
What to look for in a quote
- Will RAMS and insurance details be available?
- Proof of insurance
- Whether primer will be used where the manufacturer specifies it
- Will failed sealant be removed rather than covered?
About our floor joint sealing in Hangersley
Some joints reach us with their edges already broken. A filler laid against broken edges has nothing sound to grip, so if the edges need repair before any filling, we’ll say so and leave that decision with you. We work on joints along racking aisles, saw-cut induced joints and construction joints, and the usual reasons a site gets in touch are a rough ride across broken joints and scruffy, dirty joint lines on a shop or showroom floor. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Hangersley is the same: the right product in a properly prepared joint.
Halls, schools and small commercial buildings near places like Hangersley have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Hangersley (BH24)
- Region
- Hampshire
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Wide or random cracking that suggests a structural issue
- Level or flatness problems across the floor
- Unstable slabs moving under traffic
If you’re not sure, just phone 01277 525 020 or email us and we’ll give you a straight answer.
What we seal
- Retail and showroom floors
- Forklift and pallet-truck routes
- Loading bays
- Saw-cut induced joints
- Construction joints
- Joints along racking aisles
For managing agents and facilities managers
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Hangersley. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Joints that move: notes for Hangersley
Hangersley sits in one of the drier corners of the country, the South East. Outside joints in yards and car parks still have to be dry before sealing, and winter de-icing salt on car parks and ramps works into any open joint. Less than 3 miles from Hangersley there are at least three named estates and business parks. Their warehouses, yards and car parks are exactly where joints take the most punishment.
Across sites such as Platinum Jubilee Business Park, 1.6 miles to the south-west of Hangersley, floor and movement joints can be sealed in phases so units keep working. On a site such as Headlands Business Park, which lies west of Hangersley, the movement joints are in car park slabs, paving and building elevations.
Hangersley is in Hampshire. Across the BH24 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Hangersley is one of 723 places in Hampshire on our list for floor joints. We also cover Southampton, some 16 miles away.
If you need floor joint sealing in BH24, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on St Aubyns Lane and Cowpitts Lane or nearby, we can quote for floor joints. We also cover Shobley (1 mile east), Highwood (1 mile north), Forest Corner (1 mile south-east), Foulford (1 mile south-east) and Poulner (1 mile south-west). Nearby towns on our patch include Totton (12 miles east), Lymington (11 miles south-east), Romsey (15 miles north-east), Hythe (15 miles east), New Milton (8 miles south-east) and Barton on Sea (9 miles south-east).
Landmarks near Hangersley
We work on buildings around Ringwood School Academy and The London Tavern. Nearby you’ll also find St Leonard's Hospital (5.4 miles south-west). Green spaces nearby include Linbrook Lake and Blashford Lakes.
Questions about Hangersley
Is Headlands Business Park, near Hangersley, within your area?
Yes, sites like Headlands Business Park are within our area, along with the rest of Hangersley. A few photographs and the unit address let us price the work.
Is hospital work, at somewhere like St Leonard's Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Do you guarantee industrial floor joints?
Our workmanship carries a 12-month guarantee and the work is covered by public liability insurance.
Why has the filler pulled away from one side?
Young concrete carries on shrinking for a long time, so a semi-rigid filler can part from one face. A top-up normally puts it right.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited and a Constructionline member.
Should floor joints be filled or sealed?
We decide joint by joint. Where hard wheels cross, a semi-rigid filler is normally right, and movement joints or perimeters need something flexible. You’ll see the choice for each area in the quote.
Maintenance after handover
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Treat loading bay joints first if they’re failing
- Hold traffic back until the product has cured
- Walk the main routes and inspect joint lines on a regular cycle
- Tell us about strong cleaning chemicals before we quote
Walk the main truck routes every few months and look along the joint lines. Look for separation down one side, new chips in the arris and debris gathering, and photograph anything that changes.
Treating joints while the arrises are sound keeps the work simple. After the edges go, repairs come into it, with more downtime and more disruption.
From enquiry to sign-off
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. For a building around Hangersley, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Getting the site ready
- Have the specification and drawings to hand
- Send your site hours and access windows
- Make sure the joints can be reached
Request a quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
Also in Hangersley
Site staff or a sealant specialist?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.