Floor Joint Sealing in Beaulieu
Planning work on a floor joint in Beaulieu? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Drivers complaining about joints on a route
- Soft sealant dragged out of trafficked joints
- Grimy joint lines spoiling a showroom floor
Floor joint sealing for businesses in Beaulieu
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our floor joint sealing in Beaulieu
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Each job is priced from the metres of joint, their condition and the access windows we get, and the quote is fixed before we mobilise. If you’re dealing with cracked and crumbling joint fill and loading bay joints breaking down, we can help, on joints along racking aisles, retail and showroom floors and forklift and pallet-truck routes alike. Whoever orders the work in Beaulieu, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
Around smaller places such as Beaulieu, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
A 12-month guarantee applies to all our work. Should something we installed fail, ring 01277 525 020 or email us and we’ll come back to it.
- Where
- Beaulieu (SO42)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Keeping the joints sound
Once the work is signed off, these steps help:
- Check joint lines on busy aisles regularly
- Put loading bays at the top of the list
- Allow for topping up joints as a new slab settles
- Keep grit out of unfilled joints in the meantime
Ask drivers not to drag forks or pallets along the floor. Steel tines will mark a good joint over time.
Joints are easiest to look after when someone checks them regularly. We can quote a programme that starts with the busiest areas so nothing is left to fail.
Different surfaces, different methods
Construction joints
Construction joints, sometimes called day joints, mark where one pour ended and the next began. They can move more than saw cuts, and that shapes the product choice.
Forklift and pallet-truck routes
Main aisles and cross routes carry the most wheel movements, so their joints wear fastest. Semi-rigid fillers are widely used on these routes to hold the edges up.
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. If others near Beaulieu need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Getting the site ready
- Share the asbestos register for older buildings
- Clear stock, furniture or equipment away from the joints
- Send any specification or drawings in advance
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Read more
Questions we’re asked in Beaulieu
Can you work on a hospital site such as Lymington New Forest Hospital?
Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.
Is Beaulieu too far out for you?
Not at all. Beaulieu is within our area. We work across Greater London and the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can the sealant be colour-matched?
It depends on the product specified. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.
How do you choose the sealant?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Will we need to close the floor?
Normally only the zone we’re working in has to close. Traffic returns to each zone once it has cured and the next zone follows.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
How soon can traffic go back on the floor?
Each product has its own cure time and cooler floors take longer. Phasing is planned with that in mind.
When it isn’t the sealant
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Level or flatness problems across the floor
- Cracks across panels caused by settlement or overload
- Worn screed or surface finishes
Not sure which it is? You can ring 01277 525 020 or send details through our quote form and we’ll tell you honestly before you book.
What we seal
- Construction joints
- Retail and showroom floors
- Joints along racking aisles
- Saw-cut induced joints
- Forklift and pallet-truck routes
- Loading bays
Work for main contractors and building owners
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Traffic, movement and joints around Beaulieu
Beaulieu is within about 3 miles of the coast. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, and edges left open tend to break up faster. The South East is one of the drier parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, while winter salting gets into any joint left open.
At places like Glenmore Business Park, 2.9 miles to the north-east of Beaulieu, joints are sealed a section at a time so operations carry on. Schools like Beaulieu Village Primary School often have long brick elevations with movement joints that age quietly.
Beaulieu is about 4 miles south-west of Hythe, in Hampshire. Any commercial site in Beaulieu is covered, for single jobs and planned programmes alike. Beaulieu is one of 723 places we cover in Hampshire for floor joints. There’s a separate page for Southampton, roughly 7 miles from Beaulieu.
If you need floor joint sealing in SO42, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. For a building on High Street, Palace Lane and Hatchet Lane or nearby, send details and we’ll quote for floor joints. Close to Beaulieu, our area also takes in Bailey's Hard (1 mile south-east), The Hummicks (1 mile south-east), Furzey Lodge (1 mile west), East Boldre (1 mile south-west) and Dibden Purlieu (3 miles north-east). Further afield, our area takes in Gosport (13 miles east), Eastleigh (11 miles north-east), Fareham (11 miles east), Totton (7 miles north), Chandler's Ford (12 miles north) and Hedge End (9 miles north-east).
Near you in Beaulieu
In Beaulieu, that means premises near The Montagu Arms and the streets around them. Beaulieu’s nearest station is Beaulieu Road station, about 3.4 miles north-west of the centre. Well-known places in the area include Lymington New Forest Hospital (5.4 miles south-west) and Beaulieu Abbey And Display Of Monastic Life (under half a mile north-west).
When to call us in Beaulieu
Pallet-truck and forklift wheels concentrate weight on a tiny contact patch. Crossing an open joint, the wheel drops and knocks the opposite arris and those knocks chip the edge apart bit by bit.
Common reasons buildings call us in:
- A gap opening alongside old joint filler
- Dock area joints that have failed first
- Old filler gone hard, cracked or loose
- Drivers complaining about joints on a route
Estates like Hardley Industrial Estate, 2.8 miles north-east of Beaulieu, combine warehouse slabs, yards and loading bays, all with joints under wheels.
What your quote should include
- How the joint faces will be prepared and primed
- Whether their applicators hold CSCS cards
- Will failed sealant be removed rather than covered?
- How long is the guarantee, and what does it include?