Hampshire · England
Commercial sealant contractors in SO42
Sealant work for contractors, FMs and building owners across SO42, from Brockenhurst, East Boldre and Beaulieu, with a fixed quote before we start.
Sealant work in SO42
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Areas within SO42
- Brockenhurst
- East Boldre
- Beaulieu
- Balmerlawn
- Setley
- Bailey's Hard
- Furzey Lodge
- South Weirs
- The Hummicks
- Thorns Beach
What we do in SO42
- Industrial and floor joint sealing
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Coloured and colour-matched sealant
- Commercial washroom and wet-area sealing
- Fire-rated sealing and fire stopping
- Expansion and movement joint sealing
- Construction and new-build mastic
- Commercial sealant contractors
- Every service
Tell us what needs doing and your postcode and we’ll come back with a price: call the office on 01277 525 020 or email the details over.
Districts next door
Elsewhere in Hampshire
All places in Hampshire
Every area we cover
About commercial sealant contractors in SO42
If you look after more than one building, a single sealant contractor saves a lot of chasing. We take on one-off reseals, runs of jobs across a portfolio and planned maintenance programmes, run the same way on every site: send details, get a fixed quote, we seal, and a 12-month guarantee once it’s signed off. To get a programme moving in SO42, call 01277 525 020 or email a schedule or drawings with the site addresses. The enquiries we see most involve damp patches where an external joint has failed and external beads that have gone brittle and cracked, on movement joints in walls and floors, washrooms and tea points and kitchen worktops and splashbacks.
Working in a building that stays open takes some planning. We sign and contain the area we are in, with routes through the building left open and work section by section so the rest of the building stays in use.
- We begin with whatever information you have, whether that’s photographs, a drawing or a list of locations.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- Before anything is cut out, we agree access, timings and sequence.
- We strip the failed bead and prepare both faces of the joint.
- We fit backing to the right depth, prime where specified and lay the new bead.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
Pricing in SO42
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we will explain how it’s made up.
What you get with us
- Coloured sealants to suit the setting, where available
- Workmanship guaranteed for 12 months
- Commercial sealant work since 2005
- Colour agreed before work starts
Request a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Local landmarks in Brockenhurst
Locally, jobs take us to sites close to Church of St Saviour, Brockenhurst Church of England Primary School and Morant Arms, among other places. There’s a railway station in Brockenhurst itself: Brockenhurst station. Other landmarks nearby include Lymington New Forest Hospital (3.8 miles south).
Shops, offices and hotels in SO42
Shop fits, office refurbishments and hotel refits in towns such as Brockenhurst, East Boldre and Beaulieu all leave joints that need sealing. Visible joints call for a matched colour and a clean tooled finish.
The South East is one of the UK’s drier regions, but external sealing in SO42 still needs a dry joint and the right temperature, and damp or frosty mornings can hold it up. On the coastal side of SO42, sea-facing elevations normally show failed joints first, so they’re worth inspecting more often.
Brockenhurst: Premises within reach of Brockenhurst station, under half a mile south-east of Brockenhurst, often have busy frontages where joints are seen by everyone passing. For a hotel such as Thatched Cottage Hotel, under half a mile to the east of Brockenhurst, the colour of a joint at the bar or the bath matters to the look of the room.
Why deal with it now?
Before budgeting for new frames, cubicles or worktops, check whether it’s just the sealant. Often the fitting is sound and the joint is the only thing letting it down. Resealing normally costs far less than renewal.
Questions to ask before you book
- Their plan for phasing and protecting the area
- Their public liability cover
- How they handle RAMS and site documents
- Will CSCS-carded applicators be on site?
Cost factors for sealant joints
Each job is priced on its own details. The things that drive the figure:
- The size and state of each joint
- How accessible the joints are
- Distance, for remote addresses
- Phasing around occupants
Pricing sealant joints depends on how many there are, their condition and the access, plus any specification you are working to. Ask us for a fixed quote.
What we need to price the job
There’s no need for a formal survey. A few details are enough to get going:
- Clear photos of the problem areas
- The postcode of the building
- Whether the building will be occupied during the work
- The asbestos register, for older buildings
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, speak to us on 01277 525 020 or email drawings and photos.
How the job changes by surface
Window and door perimeters
Internally, window boards and frame edges often have decorators’ caulk or silicone that has cracked. The product depends on whether the joint will be painted.
Commercial kitchens and tea points
A smooth, continuous joint is easier to keep clean, which matters when environmental health officers look at a kitchen. We seal to a neat, cleanable finish and work around service times you agree with us.
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Respect the cure time before reopening an area
- Act on the first lifting edges rather than waiting
- Keep washroom and kitchen extraction working
- Ask cleaners to use a soft cloth and mild cleaner on sealant
Our workmanship on each job is backed by a 12-month guarantee. Keep the handover details with your O&M or maintenance records.
Tenants and staff spot black or split sealant quickly, and it reflects on how the building is run. Planned replacement saves fielding the same complaint again and again.
Signs you need commercial sealant contractors
A split down the middle of the bead tells a different story. Typically the movement was too much for the sealant chosen: a bead laid too thin, an over-stretched joint or the wrong movement class. Replacing it like for like rarely holds, so width, depth and product are checked before we quote.
Site and facilities staff are often the first to spot these:
- Layers of sealant, all of them failing
- Shrunken sealant along kitchen worktops and splashbacks
- Damp patches where an external joint has failed
- Weathered facade sealant that no longer flexes
Common questions from SO42 clients
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Do you cover SO42?
Yes. SO42 falls within our area, and the simplest way to start is to speak to us on 01277 525 020 or email a schedule or drawings.
How do you keep disruption to occupiers down?
We phase the work so parts of the building stay open. We plan around the site hours and access windows you give us.
Do you work for facilities managers and managing agents?
Yes. Use our quote form to send the site details, or phone or email us.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
What about asbestos in old mastic?
It’s possible in older buildings, especially those built before 2000. Before cutting anything out, we ask for the asbestos register or survey, and anything suspect is left until it has been tested.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.