West Hythe fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps across West Hythe, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Non-fire-rated filler around services
- Fire stopping installed outside its tested range
- Unsealed penetrations discovered above suspended ceilings
Fire stopping in West Hythe
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in West Hythe
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. If you have seals that don’t match their tested detail and open linear gaps along the top of fire-resisting walls, we can help. Looking for mastic applicators who cover West Hythe? We have been sealing commercial buildings since 2005.
Smaller places such as West Hythe still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Our workmanship is guaranteed for 12 months, in West Hythe as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Location
- West Hythe (CT21)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What sets the cost
These are the things that shape the price:
- The size and state of each joint
- Phasing around occupants
- Which sealant the job calls for
- Travel to remote or island sites
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote once you have the details.
Before you send an enquiry
There’s no need for a formal survey. A few details are enough to get going:
- Rough lengths or quantities, or drawings if you have them
- Clear photographs of the problem areas
- What the building is and how it’s used
- The asbestos register, for older buildings
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, give us a call on 01277 525 020 or use the quote form.
Nearby places to West Hythe
More services for West Hythe
Keeping the joints sound
Cleaning and maintenance staff play a part too. Pass these on to them:
- Record which product was used where
- Foam or ordinary sealant is never a fire-seal repair
- Ask the designer to confirm details early on refits
- Flag new cables with no seal around them
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts, and the work runs in step with the M&E.
Your questions answered
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in West Hythe?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Do you design the fire stopping for buildings in West Hythe?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
How long before the joints can be used?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
How do I request a quote?
You can use the quote form on this site; alternatively, phone 01277 525 020 or send photos by email. Photos, drawings or a joint schedule help us quote quickly.
Should maintenance staff do it?
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Our process
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. Smaller jobs around West Hythe can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Warn occupants and staff about the work
- Clear stock, furniture or equipment away from the joints
- Point out parking and an unloading spot
Getting a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or give us a call on 01277 525 020 or email drawings and photos if you’d rather talk the job through.
Advice
Why act early in West Hythe
Open service penetrations matter on ordinary days, not just in a fire: smoke, noise and draughts pass through them every day. The specified fire seal closes the gap for all of these and the building feels the difference. For buildings around smaller places like West Hythe, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Why us?
- CHAS accredited contractor
- Constructionline member
- Fixed quotes based on photographs, drawings or a visit
- One phone line for London, the South East and Scotland
Read how commercial sealant jobs are priced and our accreditations.
When to call us in West Hythe
Plenty of openings were simply never closed because they sat out of sight above a ceiling or inside a riser. Inspections, refurbishments and ceiling access normally bring them to light.
Typical triggers for a call:
- Open linear gaps along the top of fire-resisting walls
- Seals disturbed by maintenance and left open
- Unsealed penetrations discovered above suspended ceilings
- Builders’ foam or ordinary silicone in compartment walls
For a building such as Church of St Stephen, new heating or data runs are the usual reason penetrations need sealing.
Questions to ask before you book
- The named product and why it was chosen
- Health and safety accreditation such as CHAS
- How long is the guarantee, and what does it include?
- Their public liability cover
Where services cross fire walls in West Hythe
For England, the fire stopping of penetrations is dealt with in Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Either way, we install the specified product to its tested detail. West Hythe is about 57 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls.
In a school such as Lympne Church of England Primary School, fire-rated sealant goes in around service penetrations where it is specified.
West Hythe is about 2 miles west of Hythe, in Kent. We send applicators to West Hythe for service penetrations. We work across 931 places in Kent. For work in that direction, see our Brighton page (53 miles or so).
Commercial sites across CT21 are covered for service penetrations. Among the streets we cover are Royal Military Road, St Mary's Road and West Hythe Road. Sites close to West Hythe are covered too, including Lympne (1 mile north-west), Palmarsh (1 mile south-east), Berwick (1 mile north), Pedlinge (1 mile north-east) and Newingreen (1 mile north). Bigger towns within reach include Ashford (9 miles north-west), Canterbury (15 miles north), Dover (13 miles north-east), Folkestone (6 miles east), Tower Hamlets (12 miles east) and Hawkinge (6 miles north-east).
Near you in West Hythe
In West Hythe, that means premises near Brockhill Park Performing Arts College, Sandling Park and Botolphs Bridge Inn and the streets around them. The nearest railway station is Westenhanger station, roughly 1.9 miles north. Other landmarks nearby include Lympne Castle (less than half a mile north-west) and Hythe Museum (2.2 miles east). The countryside around West Hythe includes Tolsford Hill.