The Mastic Doctor team standing beside their branded vans outside an office building
Kent · England

Fire-rated sealing and fire stopping in Upstreet, Kent

Work needed on a service penetration in Upstreet? We assess it, carry out the work and guarantee our workmanship for 12 months.

  • Unsealed penetrations discovered above suspended ceilings
  • Open linear gaps along the top of fire-resisting walls
  • Seals that don’t match their tested detail
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Signed off, with 12 months’ guarantee.
South East, London & Scotland
CHAS accredited
Fully insured: £5m PL

Fire stopping for Upstreet sites

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

How a job runs

On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, with the work itself usually taking anything from one day to a planned run of visits, depending on the number of seals and the access. Rural sites near Upstreet may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.

  1. We start with your penetration schedule, drawings or specification.
  2. Access, permits and the order of areas are agreed with the site team.
  3. We compare every service penetration with its tested detail before sealing.
  4. Unsuitable material is removed and the opening cleaned first.
  5. Backing and fire-rated sealant are installed to the detail and tooled.
  6. We tell you about openings that need a different product.

Before we start on site

  • For older buildings, check the asbestos register before work
  • Arrange parking or a loading space
  • Confirm the product named in the specification

Ask for a quote

Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. For smaller jobs, photos and a description will do.

Get a quick quote

Related advice

How we handle fire stopping in Upstreet

Most of our fire stopping work happens after the building is up. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind. We close the openings listed on your schedule, using the specified sealant and detail. We work on linear gaps at wall heads, cable penetrations and small duct penetrations where the tested detail allows, and what we are called in for most is unsealed joints where partitions meet the slab and snag lists that include open service penetrations. Searching for sealant specialists in Upstreet? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.

Barn and farm-building conversions near places like Upstreet often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.

Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.

Location
Upstreet (CT3)
Wider area
Kent
Guarantee
12 months on every job
Price
Fixed quote, scope in writing
Phone
01277 525 020
Updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Questions we are asked in Upstreet

Is hospital work, at somewhere like St Martins Hospital, something you do?

Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.

What happens to BS 476 references for fire stopping in Upstreet?

Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.

Will you come and look before quoting?

That depends on the size and complexity of the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs normally get a visit.

When is resealing likely to be due?

Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.

Are you fully insured?

Yes. We’re fully insured, including public liability cover.

Are you CHAS accredited?

Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.

How many days will you need on site?

We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.

Compartment walls and floors in Upstreet

Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. We install whatever has been specified, to the product’s tested detail. Central London is about 57 miles from Upstreet. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.

In a building such as Church of St Mary the Virgin, any service penetration through a fire-resisting wall should be sealed to the specified detail. On estates like Canterbury Industrial Park (1.3 miles south-west of Upstreet), the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal. Holiday works at schools like Chislet Church of England Primary School often leave service openings to seal before pupils return.

Upstreet is about 4 miles south-east of Herne Bay, in Kent. We cover commercial sites throughout Upstreet, whether it’s a single job or part of a planned programme. Our Kent coverage takes in 931 places, large and small. Our London page has more on work in that area, about 57 miles away.

Postcode districts covered here: CT3. Buildings on St Mary's Gardens, Becketts Wood and Grove Ferry Hill are within our area. We also cover Grove (1 mile south), West Stourmouth (2 miles east), Sarre (2 miles north-east), Preston (2 miles south-east) and East Stourmouth (2 miles east). A short drive away, we cover Canterbury (6 miles south-west), Margate (9 miles north-east), Dover (14 miles south), Ramsgate (9 miles east), Broadstairs (10 miles east) and Whitstable (8 miles west).

Local landmarks in Upstreet

Locally, jobs take us to sites close to Grove Ferry Picnic Area, Spires Academy and The Grove Ferry Inn and the streets around them. For rail, the closest station is Sturry station, roughly 3.8 miles south-west. Nearby you will also find St Martins Hospital (5.2 miles south-west). Not far away are West Blean and Thornden Woods.

Map of Upstreet © OpenStreetMap contributors

Doing it in-house

For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.

What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.

Different surfaces, different methods

Risers and ceiling voids

Openings above suspended ceilings are easy to miss. We follow your schedule area by area and tell you about openings outside the list.

Metal pipes

Metal pipes conduct heat, so their details often call for extra measures along the pipe, and the tested detail may ask for insulation beyond the wall. If the detail needs something beyond sealant, we tell you.

Why deal with it now?

An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail, so it makes sense to get it right first time. Converted and older buildings near places like Upstreet tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.

Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote.

Why choose Mastic Doctor in Upstreet

  • One number for every site we cover
  • Public liability insurance in place
  • Failed material removed, not covered up
  • CSCS-carded applicators

See our cost guide or our accreditations.

Aftercare for building managers

Regular inspection catches problems early. In particular:

  • Agree the fire-stopping specification before services go in
  • Keep general-purpose fillers away from compartment walls
  • Get seals inspected before ceilings and boxing close
  • Look above ceilings when tiles are lifted for other jobs

New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.

Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job compared with dozens found at once.

How the quote is worked out

Before we quote, we look at:

  • The total length or number of joints
  • Working within restricted access windows
  • Backing rod, priming and other preparation
  • Access and working height

The price depends on the quantity of joints, how much old material needs removing and the access. Call for a fixed quote once you have the details.

What to include in your enquiry

A few photographs plus some basic facts will normally do. Please tell us:

  • How the joints are reached, and at what height
  • Any specification or named product
  • Photos of the joints, close up and from further back
  • Drawings or a marked-up plan, if available

Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.

Accreditations

Trusted. Accredited. Insured.