Fire Stopping in Troy Town
Fire-rated and intumescent sealing of service penetrations and linear gaps in Troy Town and across Kent. CHAS accredited and fully insured, with a 12-month guarantee.
- Openings found when ceilings come down for a refit
- Unsealed openings around new pipes and cables
- Fire stopping installed outside its tested range
Fire stopping across Troy Town
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How the quote is worked out
A fixed quote reflects the actual work. It takes account of:
- Joint width, depth and condition
- The product specified
- Access and working height
- The total length or number of joints
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Before you send an enquiry
There’s no need for a formal survey. These details are enough to start:
- Any specification or named product
- A wide shot and a close-up of the area
- The postcode of the building
- Anything awkward about access or site hours
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, call 01277 525 020 or use the quote form.
Fire stopping for commercial buildings in Troy Town
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. If you have old intumescent sealant that has split away and unsealed joints where partitions meet the slab, we can help, on cable penetrations, pipe penetrations and joints between fire-resisting walls and floors alike. Whoever orders the work in Troy Town, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Smaller places such as Troy Town still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Troy Town (TN8)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Aftercare for building managers
Problems stay small when the joints are checked regularly. In particular:
- Check risers and ceiling voids after each round of works
- Settle who seals which penetrations at the start of a project
- Keep product data and details in the fire safety file
- Check with the data sheet before painting over fire sealant
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there.
Your questions answered
Do you take on work at healthcare sites like Edenbridge and District War Memorial Hospital?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Troy Town?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
What’s the quickest route to a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.
How long does a typical visit take?
It depends on the scope, but the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Can you quote from photos?
Many jobs can be quoted from photos, drawings or a joint schedule. Where they aren’t, we arrange a site visit.
Our process
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, and the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. If others near Troy Town need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Move anything stored against the joints
- Point out any areas we must not close
- Flag any permit to work we will need
Getting a fixed quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, phone 01277 525 020 or send details through our quote form.
Related advice
For managing agents and facilities managers
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Troy Town can sit alongside others in a wider programme.
Compartment walls and floors in Troy Town
At about 21 miles from central London, Troy Town is within reach of the capital. Office refits around the commuter belt bring new cabling through fire-resisting walls. For England, the fire stopping of penetrations is dealt with in Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Hotels like The Albion Hotel (0.8 miles east of Troy Town) are refurbished in phases, and each phase can open up compartment walls.
Troy Town is about 6 miles north of East Grinstead, in Kent. We cover Troy Town and the rest of Kent, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Kent, 931 places are covered, Troy Town among them. London is covered too, around 21 miles from Troy Town.
We take on service penetrations across the TN8 postcode area. Nearby places we also cover include Marlpit Hill (1 mile east), Edenbridge (1 mile south-east), Mowshurst (1 mile east), Merle Common (2 miles north-west) and Crockham Hill (2 miles north-east) for service penetrations. Further afield, our area takes in Sevenoaks (8 miles north-east), Royal Tunbridge Wells (11 miles south-east), Tonbridge (10 miles east), Swanley (14 miles north-east), Paddock Wood (15 miles east) and Southborough (10 miles south-east).
Landmarks near Troy Town
In Troy Town, that means premises near The Swan pub. The closest station to Troy Town is Edenbridge station, roughly 0.9 miles south-east. Well-known places in the area include Tandridge Priory (2.8 miles north) and Haxted Watermill Museum (1.7 miles south). For a walk, there’s Botley Hill.
Nearby places to Troy Town
What else we do in Troy Town
What we’re called out for in Troy Town
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Deflection and building movement can open these gaps. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Any of the following is a good reason to get the joints checked over:
- Snag lists that include open service penetrations
- Expanding foam used as fire stopping
- Old intumescent sealant that has split away
- Service penetrations left open after M&E works
Hospital estates such as Edenbridge and District War Memorial Hospital, 2 miles south-east of Troy Town, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Before you book anyone
- What the guarantee covers, and for how long
- The named product and why it was chosen
- Their plan for phasing and protecting the area
- How the joint faces will be prepared and primed
How the job changes by surface
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed, and we work within it.
Small ducts
Some fire-rated sealant details cover small ducts. Larger or fire-rated ductwork usually needs a different solution set by the designer.