Fire stopping in Tilford Common
Planning work on a service penetration in Tilford Common? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Expanding foam used as fire stopping
- Unsealed penetrations discovered above suspended ceilings
- Unsealed openings around new pipes and cables
Fire stopping for businesses in Tilford Common
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping around Tilford Common: what changes locally
In England, Approved Document B covers fire stopping of openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. At about 36 miles from central London, Tilford Common is within reach of the capital. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal.
For a building such as Church of All Saints, new heating or data runs are the usual reason penetrations need sealing. For a school such as All Saints CofE Aided Infant School, penetration sealing fits best at the end of the summer works.
Tilford Common is about 3 miles south-east of Farnham, in Surrey. We cover commercial sites throughout Tilford Common, for single jobs and planned programmes alike. Our Surrey coverage takes in 379 places, large and small. Our Reading page has more on work in that area.
If you need fire stopping in GU10, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your building is just outside Tilford Common, we cover Tilford Reeds (1 mile north-west), Tilford (1 mile north), Rushmoor (1 mile south), Charleshill (2 miles north-east) and Millbridge (2 miles west). A short drive away, we cover Guildford (9 miles north-east), Woking (12 miles north-east), Camberley (11 miles north), Farnham (3 miles north-west), Frimley (10 miles north) and Haslemere (6 miles south).
Landmarks near Tilford Common
Recent enquiries here include premises near Thundry Meadows and The Duke of Cambridge pub, among other places. The closest station to Tilford Common is Farnham station, roughly 3.2 miles north-west. Well-known places in the area include Milford Hospital (5.4 miles east) and Farnham Castle (3.9 miles north-west). Green spaces nearby include Culverswell Hill and Upper Lake.
Fire stopping for commercial buildings in Tilford Common
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. We use sealant where it is the specified product, and we tell you when a detail calls for something else. If you’re dealing with penetration schedules that need working through and fire seals cut back for extra cables and never reinstated, we can put it right, on joints between fire-resisting walls and floors, service gaps in risers and cable penetrations alike. One point of contact handles commercial sealant work in Tilford Common from the first photos to the final walk-round, for single jobs and planned programmes alike.
Around smaller places like Tilford Common, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Tilford Common (GU10)
- Wider area
- Surrey
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Your questions answered
Will you take on work at estates like The Sands Business Centre, close to Tilford Common?
Yes. Our area takes in Tilford Common and its surroundings, with estates and business parks such as The Sands Business Centre included. To start, just phone 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Can you work on a hospital site such as Milford Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Do you guarantee your work?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
What do BS EN 1366-3 and BS EN 13501-2 mean?
Penetration seals are tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. Results are classified under BS EN 13501-2. The rating applies to the product as tested.
Will you write the fire-stopping specification?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
How the quote is worked out
What shapes the price:
- The site’s rules and procedures
- Any access equipment needed
- Distance, for remote addresses
- How much there is to seal
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we’ll price your job on its own details.
Details that help us quote
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Where the site is, with the postcode
- How the joints are reached, and at what height
- What the building is and how it’s used
- Rough lengths or quantities, or drawings if you have them
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
Why it’s worth doing now in Tilford Common
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. While the openings can be reached, sealing them is normally straightforward. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Around Tilford Common, it’s better to renew all the failing joints at once, rather than one at a time. Send photographs of each area and we’ll quote for the lot.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why choose Mastic Doctor in Tilford Common
- Work to your specification and the manufacturer’s guidance
- Public liability insurance in place
- Clear, fixed quotes
- One number for every site we cover
Take a look at how commercial sealant jobs are priced and how we’re accredited.
Do you need fire stopping in Tilford Common?
A common fault is a product that was never fire-rated in the first place: builders’ foam or ordinary silicone used to fill a hole. The opening looks sealed but has no fire test evidence behind it.
Typical triggers for a call:
- Unsealed openings around new pipes and cables
- Openings found when ceilings come down for a refit
- Head-of-wall gaps with no fire seal
- Seals disturbed by maintenance and left open
Hospital estates such as Milford Hospital (to the east of Tilford Common) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Before you book anyone
- Their public liability cover
- Will failed sealant be removed rather than covered?
- Will RAMS and insurance details be available?
- Are they CHAS accredited or on Constructionline?
Site staff or a sealant specialist?
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Owners, agents and contractors
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first.
How a job runs
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. For a building around Tilford Common, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
What we need from you
- Let us know about inductions and permits
- Tell us your opening times and when work is allowed
- Make sure the joints can be reached
Ask for a quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, speak to us on 01277 525 020 or email us.