The Brents fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps in The Brents. CHAS accredited and fully insured, with a 12-month guarantee.
- Unsealed penetrations discovered above suspended ceilings
- Unsealed joints where partitions meet the slab
- Fire-stopping items raised at inspection or handover
Fire stopping across The Brents
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Building owners, agents and FMs in The Brents
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Fire stopping for commercial buildings in The Brents
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate and we’d rather say that up front. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. We work on cable penetrations, joints between fire-resisting walls and floors and pipe penetrations, and what we are called in for most is hidden openings found during inspections and fire stopping installed outside its tested range. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in The Brents is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around The Brents, penetration and linear seals tend to be one-building jobs. With the specification and photographs of the gaps, we can give a fixed quote and bring the right products.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Place
- The Brents (ME13)
- Region
- Kent
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Several jobs near The Brents can be grouped on one trip. Mention the building’s opening times and we’ll work within them.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Point out parking and an unloading spot
- Send asbestos survey details if the building is pre-2000
- Have the specification and drawings to hand
Get a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Read more
Common problems we fix in The Brents
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are what we find most often.
Things that normally lead to an enquiry:
- Fire sealant pulled out of the opening
- Unsealed penetrations discovered above suspended ceilings
- Head-of-wall gaps with no fire seal
- Damaged fire seals in risers and voids
For a hotel such as The Ship Hotel, which lies south of The Brents, penetration seals are worth checking after any refit or services upgrade.
What your quote should include
- Their plan for phasing and protecting the area
- Who will actually carry out the work
- The terms of the workmanship guarantee
- How the joint faces will be prepared and primed
What we can’t put right
A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is any of the following:
- Fire doors, dampers or other fire safety equipment
- Writing the fire-stopping specification
- Large openings beyond what any sealant detail covers
Not sure which it is? You can call 01277 525 020 or email a schedule or drawings and we will tell you honestly before you book.
Where we work in The Brents
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Cable penetrations
- Pipe penetrations
The Brents: questions and answers
Is a smaller place like The Brents outside your area?
No. Places such as The Brents are covered as much as the big towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
What does the BS 476 change mean for fire-rated sealant in The Brents?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
How long does a job like this take?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
Can the building stay open while you work?
Typically, yes. We phase the work so most of the building stays in use.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Can you quote from photos?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we will arrange a visit before quoting.
Where services cross fire walls in The Brents
For England, the fire stopping of penetrations is dealt with in Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. A 2-mile radius around The Brents takes in a number of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
For a school such as Davington Primary School, penetration sealing fits best at the end of the summer works. Halls and meeting rooms at places like Faversham Parish Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
The Brents is about 1 mile north-east of Faversham, in Kent. If you’re looking for fire stopping in The Brents, we can help, as we do across Kent. The Brents is one of 931 places we cover in Kent. Our London page has more on work in that area, about 44 miles away.
Business premises anywhere in ME13 are within our area. If your site is on Ham Road, Back Lane and Quay Lane or close by, send details and we will quote for service penetrations. Sites close to The Brents are covered too, including Davington (1 mile west), Faversham (1 mile south-west), Preston (1 mile south), Oare (1 mile north-west) and Ospringe (1 mile south-west). Further afield, our area takes in Ashford (12 miles south), Canterbury (9 miles east), Sittingbourne (7 miles west), Whitstable (6 miles east), Herne Bay (11 miles east) and Minster (8 miles north-west).
What’s near The Brents
Around The Brents, our work takes us to commercial buildings near The Brents Tavern, Oare Meadow and Queen Elizabeth's Grammar School. The nearest railway station is Faversham station, about 0.6 miles south of the centre. A little further out are Newnham Castle (4.6 miles south-west).
After the work
Once the work is signed off, a little attention goes a long way:
- Foam or ordinary sealant is never a fire-seal repair
- Have penetrations checked while they can still be seen
- File the specified details where the next contractor can find them
- Leave fire sealant to cure fully before covering it
Allow the manufacturer’s stated cure time before boxing in or decorating. Not every fire-rated product can be painted.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. Then the seal goes in while the area is open, not months later.
More services for The Brents
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.