Fire-rated sealing and fire stopping in Shillingford, Oxfordshire
Work needed on a service penetration in Shillingford? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Fire seals cut back for extra cables and never reinstated
- Fire sealant pulled out of the opening
- Penetration schedules that need working through
Fire stopping in Shillingford
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Shillingford, done properly
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate, and we won’t pretend otherwise. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. We work on joints between fire-resisting walls and floors, pipe penetrations and linear gaps at wall heads, and what we’re called in for most is service penetrations left open after M&E works and snag lists that include open service penetrations. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Shillingford, preparation and product choice get the time they need.
A job near Shillingford is normally planned around one visit, so send the specification and photographs first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Shillingford (OX10)
- Wider area
- Oxfordshire
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Diagnose, treat, sign off
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For work around Shillingford, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Tell us which areas need to stay in use
- Send your site hours and access windows
- Flag any permit to work we will need
Ask for a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
When it isn’t the sealant
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. These need a different solution:
- Issuing fire ratings or certificates for seals
- Plastic pipes whose detail calls for a collar or wrap
- Reviewing a building’s overall fire safety
If in doubt, speak to us on 01277 525 020 or email a schedule or drawings and we will say what we think before you book.
What we seal
- Service gaps in risers
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
When to call us in Shillingford
Damage plays a part too. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped.
If one of these sounds familiar, it’s time for a closer look:
- Seals that don’t match their tested detail
- Head-of-wall gaps with no fire seal
- Service penetrations left open after M&E works
- Fire-stopping items raised at inspection or handover
Hotels like Shillingford Bridge Hotel (to the south of Shillingford) are refurbished in phases, and each phase can open up compartment walls.
What to look for in a quote
- How the joint faces will be prepared and primed
- How long is the guarantee, and what does it include?
- Their public liability cover
- Can the work be phased to keep areas open?
What the job involves on each surface
Drylining partitions
Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do and we’ll tell you what the detail says instead.
Plastic pipes
Plastic waste pipes through slabs come up often. The detail decides whether sealant alone is enough, and we won’t substitute it for a specified collar.
Towns and villages near Shillingford
What else we do in Shillingford
Questions we’re asked in Shillingford
Do you work on fire-rated sealing in hotels in Shillingford?
Yes, to the specification and the product’s tested detail. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
Would you work within a site like Wallingford Community Hospital?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
Do you have public liability insurance?
Yes. We are fully insured, and the certificate can go with your quote.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How long before the joints can be used?
We’ll confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
Do you cover Shillingford?
Yes. Shillingford is in our area and the rest of Oxfordshire, within our coverage of Greater London, South East England and Scotland. For a quote, speak to us on 01277 525 020 or email drawings and photos.
What sets the cost
Each job is priced on its own details. The things that drive the figure:
- The site’s rules and procedures
- Backing rod, priming and other preparation
- Whether the work must be split into stages
- Which sealant the job calls for
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
What to include in your enquiry
However big the job, these details speed things up:
- How the joints are reached, and at what height
- The type of building and who uses it
- Rough lengths or quantities, or drawings if you have them
- A wide shot and a close-up of the area
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Why it’s worth doing now in Shillingford
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. One visit to deal with every failing joint makes more sense than several trips to a place like Shillingford. Photos of every joint help us quote for the whole job.
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we’ll explain how it’s made up.
Why appoint us
- Work carried out by CSCS-carded applicators
- Specification-led, product-correct work
- Fully insured, including public liability cover
- Constructionline member
Read our cost guide or our accreditations.
Service penetrations in Shillingford buildings
For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Either way, we install the specified product to its tested detail. Central London is about 46 miles from Shillingford. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
Where a unit on an estate such as Hithercroft Industrial Estate, which lies south of Shillingford, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail. Wherever services are added at a hospital such as Wallingford Community Hospital (to the south of Shillingford) the compartment line has to be made good with the specified product.
Shillingford is about 5 miles east of Didcot, in Oxfordshire. Looking for fire stopping in Shillingford? We can help, as we do across Oxfordshire. Across Oxfordshire, 423 places are covered, Shillingford among them. There’s a separate page for Oxford, about 9 miles away.
Commercial sites across OX10 are covered. For a building on Warborough Road, New Road and Hartley Close or nearby, send details and we’ll quote for service penetrations. Just outside Shillingford, we also work in Warborough (1 mile north), Dorchester (1 mile north-west), Brightwell-cum-Sotwell (1 mile south-west), Benson (2 miles south-east) and Berrick Salome (2 miles north-east). Further afield, our area takes in Oxford (9 miles north-west), Didcot (5 miles west), Abingdon-on-Thames (7 miles north-west), Thame (11 miles north-east), Wantage (13 miles west) and Henley-on-Thames (12 miles south-east).
Around Shillingford
Around Shillingford, our work takes us to commercial buildings near The Six Bells Inn and Wallingford School and the streets around them. The closest station to Shillingford is Cholsey station, roughly 4.3 miles south of the centre. Well-known places in the area include Aston Martin Heritage Trust Museum (1.9 miles north) and Brightwell Castle (1.7 miles south-west). Open spaces near Shillingford include Ewelme Watercress Beds and Wittenham Clumps.