Sheerness fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Sheerness and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Openings found when ceilings come down for a refit
- Fire seals cut back for extra cables and never reinstated
- Head-of-wall gaps with no fire seal
Need fire stopping in Sheerness?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in Sheerness
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. A rating such as EI 60 only holds when the product is installed as it was tested. So our job is to reproduce that arrangement faithfully. If you have seals that don’t match their tested detail and seals disturbed by maintenance and left open, we can put it right, on service gaps in risers, linear gaps at wall heads and pipe penetrations alike. Whoever orders the work in Sheerness, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In places the size of Sheerness, fire-resisting walls and floors are found in schools, care homes, health centres and mixed-use buildings. Specified fire-rated sealant goes around new services there, built to match the manufacturer’s detail.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Place
- Sheerness (ME12)
- Region
- Kent
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Sheerness
Can you work at a site such as Neats Court Retail Park, by Sheerness?
Yes. Our area takes in Sheerness and its surroundings, with estates and business parks such as Neats Court Retail Park included. A few photos and the unit address let us price the work.
Could you schedule work at a campus like Sheppey College for the vacation?
Yes. We plan campus work around teaching, exams and residence turnarounds. Let us know which documents your site asks for, and we will confirm them alongside the quote.
How much does the work cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote and we’ll price it properly.
Will you sign off the seals for us?
No. We don’t certify or sign off fire stopping, and we hold no third-party fire-stopping installer certificate. We work to the specification and the manufacturer’s installation guidance.
What about RAMS and site documents?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Which standards are fire seals tested to?
The tests are BS EN 1366-3 for penetrations and BS EN 1366-4 for linear joints, and classification is to BS EN 13501-2. An EI 60 seal kept its integrity and insulation for 60 minutes as tested and the installation has to match the test.
Is your workmanship covered by a guarantee?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
Different surfaces, different methods
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. If the gap exceeds the tested range, sealant alone won’t do.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. Each gap is measured where it is widest against the detail’s limits.
On site: what to expect
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. For a job in Sheerness, the main thing is a clear picture of the work, so send photographs of each area. A fixed quote follows.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Agree which areas must stay open
- Make sure the joints can be reached
- Share the asbestos register for older buildings
Getting a fixed quote
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or use the quote form if you’d rather talk the job through.
Advice
Honest limits
Being straight saves everyone time. New sealant won’t cure:
- Openings that need collars, wraps, batts or boards rather than sealant
- Issuing fire ratings or certificates for seals
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If you are not sure, just give us a call on 01277 525 020 or send photos by email and we will give you a straight answer before you book.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
Signs you need fire stopping in Sheerness
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Movement in the frame or slab can open the joint. The tested detail for a linear joint states the width and movement it covers.
It’s worth sending us details if you spot any of the following:
- Seals disturbed by maintenance and left open
- Fire stopping installed outside its tested range
- Openings left by services added after handover
- Old intumescent sealant that has split away
Halls and meeting rooms at places like Parish Church of the Holy Trinity sometimes gain new services, and any compartment wall crossed needs the specified seal.
Comparing quotes
- Health and safety accreditation such as CHAS
- Will CSCS-carded applicators be on site?
- What site paperwork they can supply
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Keeping the joints sound
Keep the joints in good shape with a few simple steps:
- Agree the fire-stopping specification before services go in
- Look above ceilings when tiles are lifted for other jobs
- Don’t let anyone top up a fire seal with the wrong product
- Brief every trade that openings they make must be sealed
Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.
Work for main contractors and building owners
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
Towns and villages near Sheerness
More services for Sheerness
Fire stopping in Sheerness: the local picture
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. We install whatever has been specified, to the product’s tested detail. Sheerness lies roughly 37 miles out from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls, and the gaps need sealing with the specified product.
Shop fits on retail sites such as Neats Court Retail Park (1.9 miles south of Sheerness) can bring new services through fire-resisting walls between units, to be sealed with the specified product. Hotels like The Royal Hotel, under half a mile north-east of Sheerness, are refurbished in phases, and each phase can open up compartment walls.
Sheerness is about 7 miles north of Sittingbourne, in Kent. Any commercial site in Sheerness is covered, for single jobs and planned programmes alike. Across Kent, 931 places are covered, including Sheerness. Our London page has more on work in that area, about 37 miles away.
Postcode districts covered here: ME12. Streets here include High Street, Granville Road and Millennium Way. Main routes into Sheerness include the A249 and A250, useful when we plan access and materials. We also cover Blue Town (1 mile north-west), Halfway Houses (1 mile south-east), Queenborough (2 miles south), Rushenden (2 miles south-west) and Grain (2 miles north-west). A short drive away, we cover Sittingbourne (7 miles south), Whitstable (13 miles south-east), Faversham (10 miles south-east), Davington (10 miles south-east), Foley Park (15 miles south-west) and Preston (10 miles south-east).
Local landmarks in Sheerness
Locally, jobs take us to sites close to Oasis Academy Isle of Sheppey, Barton's Point Coastal Park and The Crown pub and the streets around them. There’s a railway station in Sheerness itself: Sheerness-On-Sea station. A little further out are Rose Street Cottage of Curiosities (under half a mile north).