Fire stopping in Selsfield Common
Looking for fire stopping in Selsfield Common? It’s simple: send details, get a quote, we seal, guaranteed.
- Snag lists that include open service penetrations
- Fire seals cut back for extra cables and never reinstated
- Expanding foam used as fire stopping
Need fire stopping in Selsfield Common?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire-rated sealing for Selsfield Common buildings
Several hotels sit less than 2 miles from Selsfield Common. In hotels, bedroom and corridor walls are usually fire-resisting, so services added in a refit need sealing with the specified product. Central London is about 28 miles from Selsfield Common. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
In a building such as Church of St Leonard, any service penetration through a fire-resisting wall should be sealed to the specified detail. Hotels such as Alexander House Hotel & Utopia Spa (to the north of Selsfield Common) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. Office fit-outs on sites such as Rowfant Business Centre, 1.8 miles north-west of Selsfield Common, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Selsfield Common is about 4 miles south-west of East Grinstead, in West Sussex. Businesses, contractors and managing agents in Selsfield Common use us for work on service penetrations, as part of our coverage of West Sussex. 373 places across West Sussex fall within our area, Selsfield Common among them. For work in that direction, see our Brighton page, about 18 miles away.
Postcode districts covered here: RH19. Being close to the B2028, Selsfield Common is easy to get to with materials and equipment. If your building is just outside Selsfield Common, we cover West Hoathly (1 mile south-east), Sharpthorne (2 miles south-east), Little London (2 miles south), Highbrook (3 miles south) and Ardingly (3 miles south). A short drive away, we cover Crawley (5 miles west), Horsham (11 miles west), Haywards Heath (6 miles south), Burgess Hill (10 miles south), East Grinstead (4 miles north-east) and Broadfield (6 miles west).
What’s near Selsfield Common
Locally, jobs take us to sites close to The Crown Public House and the streets around them. Selsfield Common’s nearest station is East Grinstead station, roughly 3.5 miles north-east of the centre. Well-known places in the area include Queen Victoria Hospital (4.5 miles north-east) and Waterbury Castle (4 miles south-east). The countryside around Selsfield Common includes Hedgecourt Lake.
How we handle fire stopping in Selsfield Common
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow. We work on pipe penetrations, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors, and what we are called in for most is fire seals cut back for extra cables and never reinstated and service penetrations left open after M&E works. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Selsfield Common, preparation and product choice get the time they need.
Around smaller places like Selsfield Common, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Location
- Selsfield Common (RH19)
- Region
- West Sussex
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Work for main contractors and building owners
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
What happens if it’s left?
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these and the building feels the difference. Older rural buildings around Selsfield Common move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
A quote for service penetrations depends on how many there are, their condition and the access, plus any specification you are working to. Ask us for a fixed quote.
Why us?
- A Constructionline member, so easy to vet
- Commercial sealant work since 2005
- Fixed quotes based on photos, drawings or a visit
- Work to your specification and the manufacturer’s guidance
Take a look at how commercial sealant jobs are priced and our accreditations.
Honest limits
A proper diagnosis includes knowing what sealant can’t do. You will hear from us if the cause turns out to be one of these:
- Fire doors, dampers or other fire safety equipment
- Signing off or certifying a building’s fire stopping
- Writing the fire-stopping specification
Not sure which it is? You can call 01277 525 020 or email the details over and we’ll tell you honestly.
What we seal
- Cable penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Linear gaps at wall heads
Questions we’re asked in Selsfield Common
What happens to BS 476 references for fire stopping in Selsfield Common?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Is Selsfield Common off your patch?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
How long does a job like this take?
That varies with the scale of the job, but the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we will set out a timescale with the quote.
What will the job cost?
There isn’t a price list, because every site is different. Send photographs or drawings and we’ll price it at a fixed figure.
Quoting for work in Selsfield Common
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Induction, permit and paperwork requirements
- Whether old sealant has to be cut out first
- The total length or number of joints
- Joint width, depth and condition
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Sending details for a quote
For an accurate fixed quote, we need a clear picture of the site. Send us:
- A wide shot and a close-up of the area
- The postcode of the building
- How the joints are reached, and at what height
- Any specification or named product
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to give us a call on 01277 525 020 or email a schedule or drawings.
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Nearby places to Selsfield Common
Other services in Selsfield Common
On site: what to expect
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. For a building around Selsfield Common, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
What we need from you
- Send your site hours and access windows
- Share the asbestos register for older buildings
- Agree which areas must stay open
Quotes
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, speak to us on 01277 525 020 or send details through our quote form.