Fire Stopping in Ardingly
Looking for fire stopping in Ardingly? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Head-of-wall gaps with no fire seal
- Hidden openings found during inspections
- Old intumescent sealant that has split away
Fire stopping in Ardingly
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When to call us in Ardingly
Some service penetrations were never sealed at all. They come to light during inspections, refits or when another trade lifts a tile.
These are often picked up first by site or facilities staff:
- Fire seals cut back for extra cables and never reinstated
- Builders’ foam or ordinary silicone in compartment walls
- Snag lists that include open service penetrations
- Open linear gaps along the top of fire-resisting walls
For a building at a site such as Horsted Keynes Business Park, 2 miles to the east of Ardingly, a check of penetration seals after each fit-out is good practice.
Before you book anyone
- The named product and why it was chosen
- Will RAMS and insurance details be available?
- Can the work be phased to keep areas open?
- The terms of the workmanship guarantee
Fire stopping in Ardingly
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it, matching the product and detail it names. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you have penetration schedules that need working through and openings found when ceilings come down for a refit, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Ardingly, that means joint design, primers and backing rod as standard.
A job near Ardingly is typically planned around one visit, with the specification and photos sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Ardingly (RH17)
- Region
- West Sussex
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Towns and villages near Ardingly
What else we do in Ardingly
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. If others near Ardingly need work, visits can be combined, which keeps travel down. You’ll have a fixed quote before work starts.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Getting the site ready
- Share your working hours and any access restrictions
- Point out any areas we must not close
- Have the specification and drawings to hand
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. For smaller jobs, photos and a description will do.
Related advice
After the work
Regular inspection catches problems early. In particular:
- Leave fire sealant to cure fully before covering it
- Get seals inspected before ceilings and boxing close
- File the specified details where the next contractor can find them
- Ask the designer to confirm details early on refits
Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there.
FAQs: Ardingly
Can you work around term dates at a campus such as Haywards Heath College?
Yes. Education sites usually want the work in vacations or in phases during term, and we plan to suit. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
What happens to BS 476 references for fire stopping in Ardingly?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Can you handle several sites?
Yes. Several buildings can share a single quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
How do I request a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
Can the building stay open while you work?
In the majority of cases, yes. We phase the work so most of the building stays in use.
Compartment walls and floors in Ardingly
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Ardingly is about 31 miles from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
In a building such as St Peter's Church, any service penetration through a fire-resisting wall should be sealed to the specified detail. Wherever services are added at a hospital such as Princess Royal Hospital (to the south of Ardingly) the compartment line has to be made good with the specified product.
Ardingly is about 3 miles north of Haywards Heath, in West Sussex. Commercial clients in Ardingly can call on us for service penetrations. Our West Sussex coverage takes in 373 places, large and small. We also cover Brighton, around 15 miles from Ardingly.
Work on service penetrations is covered throughout RH17, for business premises of every kind. For a building on High Street, Munnion Road and Price Way or nearby, we can quote for service penetrations. Just outside Ardingly, we also work in Little London (1 mile north), Highbrook (1 mile north-east), Lindfield (2 miles south), Horsted Keynes (2 miles east) and West Hoathly (2 miles north-east). Further afield, our area takes in Crawley (6 miles north-west), Horsham (10 miles west), Haywards Heath (3 miles south), Burgess Hill (7 miles south), East Grinstead (6 miles north-east) and Broadfield (6 miles north-west).
Near you in Ardingly
We work on buildings around The Ardingly Inn, among other places. The nearest railway station is Balcombe station, about 2.5 miles west. Well-known places in the area include Waterbury Castle (2 miles east) and Princess Royal Hospital (3.9 miles south). For a walk, there’s Blunts Wood and Paiges Meadow.
How the job changes by surface
Drylining partitions
Drylined fire walls are tested in a particular build-up. The sealant detail has to be tested in that wall type, with the stated board layers.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and loose debris are cleared out of the opening, so the sealant and any backing sit properly.
Why deal with it now?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down. Halls, stores and units around places like Ardingly may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
What you get with us
- Failed material removed, not covered up
- A fixed quote before work starts
- One number for every site we cover
- Fully insured, including public liability cover
Take a look at our cost guide or our accreditations and insurance.
Should maintenance staff do it?
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.