Fire stopping in Sandwich
Fire stopping in Sandwich, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Fire sealant pulled out of the opening
- Builders’ foam or ordinary silicone in compartment walls
- Head-of-wall gaps with no fire seal
Fire stopping in Sandwich
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
On site: what to expect
On arrival, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before anything is cut or cleaned, with the work itself usually taking a single visit for a short list of penetrations, or a phased programme for a whole building. Work in places the size of Sandwich is planned as a single visit where we can. Clear photos and measurements help us bring the right products.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Tell us which areas need to stay in use
- Tell us your opening times and when work is allowed
- Have the specification and drawings to hand
Request a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Advice
Fire stopping in Sandwich
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, call the office on 01277 525 020 or send details through our quote form with the schedule or marked-up drawings and the specified product data. Tell us what records you need and we will confirm with the quote. The enquiries we see most involve fire-rated sealant that has cracked or shrunk back and head-of-wall gaps with no fire seal, on cable penetrations, joints between fire-resisting walls and floors and pipe penetrations. Searching for sealant specialists in Sandwich? We have been sealing commercial buildings since 2005.
Around Sandwich, penetration and linear seals tend to be one-building jobs. Send the specification, drawings or photos of the openings and we will quote to suit.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Where
- Sandwich (CT13)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Cost factors for service penetrations
To price the job, we consider:
- Backing rod, priming and other preparation
- Site requirements such as inductions and permits
- Access and working height
- Removal of failed or old sealant
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a quote once you have the details.
Sending details for a quote
Diagnosis starts before we arrive. Tell us:
- Asbestos survey details if the building is older
- Specification clauses that apply
- Drawings or a marked-up plan, if available
- Any dates the work must fit around
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, give us a call on 01277 525 020 or email drawings and photos.
Fire stopping around Sandwich: points for this area
Sandwich has a number of hotels close by, all within 2 miles. In hotels, bedroom and corridor walls are usually fire-resisting, so services added in a refit need sealing with the specified product. Central London is about 64 miles from Sandwich. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls; the gaps need the specified seal.
For a building at a site such as Birnham Farm Business Centre, 2.2 miles south-west of Sandwich, a check of penetration seals after each fit-out is good practice. Hotels such as The Fleur De Lys Hotel (to the north of Sandwich) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. For a building such as Sandwich United Reformed Church, new heating or data runs are the usual reason penetrations need sealing.
Sandwich is about 5 miles north-west of Deal, in Kent. We send applicators to Sandwich for service penetrations, handled exactly as we handle every other area. Our Kent coverage takes in 931 places. For work in that direction, see our London page (64 miles or so).
If you need fire stopping in CT13, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Cattle Market, Market Street and High Street are within our area for service penetrations. Close to Sandwich, our area also takes in Great Stonar (1 mile north), Felderland (1 mile south), Worth (1 mile south), Woodnesborough (1 mile south-west) and Statenborough (1 mile south-west). A short drive away, we cover Canterbury (11 miles west), Margate (8 miles north), Dover (10 miles south), Folkestone (15 miles south-west), Ramsgate (5 miles north-east) and Broadstairs (7 miles north-east).
Landmarks near Sandwich
Around Sandwich, our work takes us to commercial buildings near Ham Fen, Sir Roger Manwood's School and The Red Cow Public House. Sandwich has its own railway station: Sandwich station. Nearby you’ll also find The Precinct Toy Collection (under half a mile north) and Ramsgate General Hospital (5 miles north-east). The countryside around Sandwich includes Monk's Wall nature reserve.
Why act early in Sandwich
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed which is why earlier is better. For buildings in places like Sandwich, one well-planned visit beats several small ones, so it’s worth dealing with every failing joint at once.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
What you get with us
- Fully insured
- Sealing commercial buildings since 2005
- CHAS accredited contractor
- Constructionline member for supplier checks
Take a look at our cost guide and how we’re accredited.
How the job changes by surface
Metal pipes
Metal pipes conduct heat, so their details often call for extra measures along the pipe, and some details add wrapping or a set length of insulation. If the detail needs something beyond sealant, we tell you.
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers.
Also near Sandwich
More services for Sandwich
General trades versus a specialist
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Building owners, agents and FMs in Sandwich
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Sandwich can sit alongside others in a wider programme across Kent.
Questions about Sandwich
Would you work within a site like Ramsgate General Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is Sandwich off your patch?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
Can you quote from photographs?
That depends on the size and complexity of the job. Straightforward work can often be priced from photos and measurements, while larger or less clear jobs get a site visit first.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it, flagging anything that needs clarifying.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
Do you hold third-party fire-stopping installer certification?
No. We are not members of a third-party fire-stopping installer scheme. We are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded. Where a client or main contractor requires a scheme member, we will say so right away rather than waste your time.
What do BS EN 1366-3 and BS EN 13501-2 mean?
Penetration seals are tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. Results are classified under BS EN 13501-2 as E for integrity and I for insulation, with a time such as EI 60 or EI 120. That rating only holds when the product is installed to its tested detail.