Fire-rated sealing and fire stopping in Redford, West Sussex
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Redford and the surrounding area. Send details for a fixed quote.
- Unsealed joints where partitions meet the slab
- Seals that don’t match their tested detail
- Fire-stopping items raised at inspection or handover
Fire stopping for businesses in Redford
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Compartment walls and floors in Redford
Redford is about 44 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls. For England, the fire stopping of penetrations is dealt with in Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
On a hospital site such as Midhurst Community Hospital, 3 miles to the south-east of Redford, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits. For a unit at a site such as Hurstfold Industrial Estate (3 miles east of Redford), new power or data runs between office and warehouse can breach a compartment wall.
Redford is about 7 miles east of Petersfield, in West Sussex. Looking for fire stopping in Redford? We can help. Across West Sussex, 373 places are covered, Redford among them. Our Portsmouth page has more on work in that area, about 20 miles away.
Postcode districts covered here: GU29 for service penetrations. Sites close to Redford are covered too, including Fernhurst (3 miles north-east), Linchmere (3 miles north), Kingsley Green (3 miles north-east), Woolmer Hill (4 miles north) and Hammer (4 miles north). Bigger towns within reach include Chichester (13 miles south), Billingshurst (14 miles east), Portfield (13 miles south), Midhurst (3 miles south), Arundel (15 miles south-east) and West Chiltington Common (15 miles south-east).
What’s near Redford
Redford’s nearest station is Liphook station, roughly 3.1 miles north. Nearby you will also find Midhurst Museum (3.3 miles south-east) and Midhurst Community Hospital (3 miles south-east). The countryside around Redford includes Cooksbridge Meadow and Wheeler's Down.
Fire stopping in Redford
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, speak to us on 01277 525 020 or send photos by email with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. We work on joints between fire-resisting walls and floors, pipe penetrations and cable penetrations, and the usual reasons a site gets in touch are unsealed openings around new pipes and cables and openings found when ceilings come down for a refit. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Redford is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
A job near Redford is usually planned around one visit, so send the specification and photographs first. Design and sign-off belong to the designer or building control; we install what’s specified.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Location
- Redford (GU29)
- Region
- West Sussex
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Also in Redford
What we’re called out for in Redford
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser leaves an opening that nobody returns to. Over a few years of fit-outs, a wall can collect a lot of these.
Clients typically get in touch after noticing something like this:
- Damaged fire seals in risers and voids
- Penetration schedules that need working through
- Fire-rated sealant that has cracked or shrunk back
- Expanding foam used as fire stopping
Older community buildings such as Church of St Luke that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
What your quote should include
- Will CSCS-carded applicators be on site?
- Their plan for phasing and protecting the area
- What site paperwork they can supply
- The named product and why it was chosen
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
What happens if it’s left?
Open penetrations multiply: each new service adds to the list. A schedule that is dealt with regularly stays manageable. One visit to deal with every failing joint makes more sense than several trips to a place like Redford, rather than one at a time. Send photographs of each area and we’ll quote for the lot.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
Why appoint us
- Products installed to the manufacturer’s instructions
- Fully insured, including public liability cover
- One contact handling all your sites
- Constructionline member for supplier checks
Read our cost guide and how we’re accredited.
Keeping the joints sound
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Treat an open penetration as a priority repair
- Don’t let anyone top up a fire seal with the wrong product
- Put resealing into every M&E and fit-out package
- Record which product was used where
Store the specified product details somewhere the next contractor can find them. Anyone resealing later needs to know which product and detail were used.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small compared with dozens found at once.
Questions we are asked in Redford
How does the move away from BS 476 affect penetration seals in Redford?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Is Hurstfold Industrial Estate, near Redford, within your area?
Yes. Our area takes in Redford and its surroundings, with estates and business parks such as Hurstfold Industrial Estate included. Photos and a short description are enough for a first look.
What will the job cost?
There isn’t a price list, because every site is different. Send photos or drawings and we’ll price it at a fixed figure.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
How do I request a quote?
The quote form is the simplest route, though you can also speak to us on 01277 525 020 or email a schedule or drawings. Photos, drawings or a joint schedule help us quote quickly.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Owners, agents and contractors
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Diagnose, treat, sign off
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. Rural sites near Redford may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Tell staff and tenants when we will be in
- For older buildings, check the asbestos register before work
- Arrange parking or a loading space
Quotes
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or speak to us on 01277 525 020 or email drawings and photos to discuss it first.