Fire stopping in Radley
Looking for fire stopping in Radley? It’s simple: send details, get a quote, we seal, guaranteed.
- Expanding foam used as fire stopping
- Unsealed penetrations discovered above suspended ceilings
- Openings left by services added after handover
Need fire stopping in Radley?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
On site: what to expect
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then handed back before we move to the next. Jobs in and around smaller places like Radley are typically planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Point out parking and an unloading spot
- Let us know about inductions and permits
- Send your site hours and access windows
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
Read more
Fire stopping in Radley, done properly
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings. Tell us what records you need and we will confirm with the quote. Site teams most often ask us about non-fire-rated filler around services and old intumescent sealant that has split away, across linear gaps at wall heads, joints between fire-resisting walls and floors and service gaps in risers. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Radley is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
A job near Radley is normally planned around one visit, so send the specification and photos first. Design and sign-off belong to the designer or building control; we install what’s specified.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Where
- Radley (OX14)
- Wider area
- Oxfordshire
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
What we can’t put right
We check first that sealant really is the fix. It isn’t the answer for:
- Writing the fire-stopping specification
- Large openings beyond what any sealant detail covers
- Gaps in walls that were never built as compartment walls
Not sure which it is? You can call 01277 525 020 or email drawings and photos and we will tell you honestly before you book.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Service gaps in risers
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
Places near Radley
Other services in Radley
Compartments and services around Radley
Radley lies roughly 51 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls. In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Either way, we install the specified product to its tested detail.
At a college such as Abingdon & Witney College: Abingdon Campus, which lies west of Radley, checking penetration seals after summer M&E works is good practice. Theatres, wards and plant rooms at sites like Abingdon Community Hospital (to the south-west of Radley) all have compartment walls crossed by services.
Radley is about 2 miles north-east of Abingdon-on-Thames, in Oxfordshire. Businesses, contractors and managing agents in Radley use us for work on service penetrations. We work across 423 places in Oxfordshire, from busy centres to rural villages.
If you need fire stopping in OX14, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Among the streets we cover are Church Road, Selwyn Crescent and Ferny Close, and sites on any of them can send details for a fixed quote. Close to Radley, our area also takes in Abingdon-on-Thames (2 miles south-west), Nuneham Courtenay (2 miles east), Culham (2 miles south), Clifton Hampden (3 miles south-east) and Caldecott (3 miles south-west). Nearby towns on our patch include Oxford (4 miles north), Didcot (5 miles south), Bicester (15 miles north), Witney (13 miles north-west), Thame (12 miles east) and Wantage (10 miles south-west).
Near you in Radley
Around Radley, our work takes us to commercial buildings near Nuneham Courtenay, Fitzharrys School and Bowyer Arms, among other places. Radley has its own railway station: Radley station. Well-known places in the area include Littlemore Hospital (2.3 miles north) and FitzHarris Castle (1.8 miles south-west). Not far away are Harcourt Hill and Dry Sandford Pit.
Aftercare for building managers
A few simple habits keep the new joints working:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Check risers and ceiling voids after each round of works
- Ask the designer to confirm details early on refits
- Get seals inspected before ceilings and boxing close
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Not every fire-rated product can be painted, so check the product data first.
Specify fire stopping early on refits, not as an afterthought. The designer can then choose details that suit the services planned.
Radley: questions and answers
Do you seal service penetrations in hotels around Radley?
Yes, where fire-rated sealant is the specified product. Each seal follows the tested detail, and rooms are done in turn.
Is Radley Road Industrial Estate, near Radley, within your area?
Yes. Our area takes in Radley and its surroundings, with estates and business parks such as Radley Road Industrial Estate included. A few photographs and the unit address let us price the work.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, call the office on 01277 525 020 or email us. Include photographs or drawings if you have them.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, with one point of contact.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Is Radley in your area?
Yes. We take on work across Radley.
What we’re called out for in Radley
When a seal departs from its tested detail, the evidence no longer covers it. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are what we find most often.
Things that normally lead to an enquiry:
- Old intumescent sealant that has split away
- Open linear gaps along the top of fire-resisting walls
- Fire seals cut back for extra cables and never reinstated
- Expanding foam used as fire stopping
At a university such as University College, 4.5 miles north of Radley, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work.
Comparing quotes
- Which product they’ll use, and why it suits the joint
- Will failed sealant be removed rather than covered?
- Their approach to joint depth and backing
- Health and safety accreditation such as CHAS
Leave it or put it right?
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. Converted and older buildings near places like Radley tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why clients in Radley choose us
- Products installed to the manufacturer’s instructions
- Sealing commercial buildings since 2005
- CHAS accredited contractor
- 12-month guarantee on workmanship
Take a look at our cost guide or how we’re accredited.
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules.