Fire-rated sealing and fire stopping in Privett, Hampshire
Need fire stopping in Privett? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Fire-rated sealant that has cracked or shrunk back
- Non-fire-rated filler around services
- Seals disturbed by maintenance and left open
Fire stopping for businesses in Privett
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When to call us in Privett
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
Typical triggers for a call:
- Damaged fire seals in risers and voids
- Openings found when ceilings come down for a refit
- Fire-rated sealant that has cracked or shrunk back
- Openings left by services added after handover
For a hospital such as Petersfield Community Hospital, which lies south-east of Privett, penetration sealing is typically phased ward by ward, with infection-control rules agreed first.
Before you book anyone
- How the existing material will be dealt with
- How long is the guarantee, and what does it include?
- What level of public liability insurance do they hold?
- The named product and why it was chosen
How we handle fire stopping in Privett
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it. Where there isn’t one, the designer or fire engineer needs to set one first. Most enquiries involve seals that don’t match their tested detail and fire-stopping items raised at inspection or handover, across pipe penetrations, small duct penetrations where the tested detail allows and service gaps in risers. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Privett, that means joint design, primers and backing rod as standard.
Smaller places such as Privett still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
A 12-month guarantee applies to all our work in Hampshire. Should something we installed fail, phone 01277 525 020 or send photos by email and we’ll come back to it.
- Location
- Privett (GU34)
- Region
- Hampshire
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Fire stopping around Privett: how the place shapes the job
Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Either way, we install the specified product to its tested detail. Central London is about 52 miles from Privett. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
In a building such as Holy Trinity Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Privett is about 5 miles north-west of Petersfield, in Hampshire. Anywhere in GU34, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our Hampshire coverage takes in 723 places. Sites around Portsmouth have their own page, about 16 miles away.
Work on service penetrations is covered throughout GU34, for business premises of every kind. For a building on Church Road and Merepond Lane or nearby, send details and we’ll quote for service penetrations. Sites close to Privett are covered too, including Bailey Green (1 mile north-west), Filmore Hill (1 mile west), West Tisted (2 miles north-west), Monkwood (2 miles north) and Drayton (3 miles south). Further afield, our area takes in Winchester (12 miles west), Havant (12 miles south), Eastleigh (14 miles west), Fareham (15 miles south-west), Horndean (9 miles south) and Alton (8 miles north).
Around Privett
Privett’s nearest station is Petersfield station, about 4.7 miles south-east of the centre. Well-known places in the area include Petersfield Community Hospital (4.8 miles south-east). For a walk, there’s Pidham Hill and Shutts Copse.
How a job runs
When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before any cutting starts, with the work itself usually taking a single visit for a short list of penetrations, or a phased programme for a whole building. Jobs in and around smaller places like Privett are typically planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Point out any areas we must not close
- For older buildings, check the asbestos register before work
- Have the specification and drawings to hand
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or send details through our quote form with what you know.
Advice
Why it’s worth doing now in Privett
Open service penetrations matter on ordinary days, not just in a fire: smoke, noise and draughts pass through them every day. Sealing them to the specified detail deals with the fire risk first and the building feels the difference. One visit to deal with every failing joint makes more sense than several trips to a place like Privett, rather than one at a time. Photos of every joint help us quote for the whole job.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why appoint us
- 12 months’ guarantee on every job
- Commercial sealant work since 2005
- One phone line for London, the South East and Scotland
- A fixed quote before work starts
Read what affects the cost or our accreditations.
Places near Privett
What else we do in Privett
Common questions from Privett clients
Is hospital work, at somewhere like Petersfield Community Hospital, something you do?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Privett?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
Does weather matter for sealant work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
How long does a job like this take?
That varies with the scale of the job, but the work usually takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we will set out a timescale with the quote.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Quoting for work in Privett
A fixed quote reflects the actual work. It allows for:
- The product specified
- Whether the work must be split into stages
- The size and state of each joint
- Induction, permit and paperwork requirements
There’s no price list, since every building and every scope is different. Call for a quote.
Sending details for a quote
A few photographs plus some basic facts will normally do. It helps to include:
- Specification clauses that apply
- Asbestos survey details if the building is older
- Any dates the work must fit around
- Approximate linear metres or a joint schedule
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Surface by surface
Cables and cable bundles
New data and power cables are the most common breach we see. Openings around new cables are resealed to the detail.
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement.
After the work
After handover, a little attention goes a long way:
- Keep product data and details in the fire safety file
- Check with the data sheet before painting over fire sealant
- Include service cupboards in routine inspections
- Foam or ordinary sealant is never a fire-seal repair
Keep the product data and installation details with the building’s fire safety information. Anyone resealing later needs to know which product and detail were used.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.