Fire-rated sealing and fire stopping in Privett, Hampshire
Fire-rated and intumescent sealing of service penetrations and linear gaps in Privett. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Penetration schedules that need working through
- Fire seals cut back for extra cables and never reinstated
- Improvised or mixed-product fire seals
Fire stopping for businesses in Privett
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Signs you need fire stopping in Privett
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are what we find most often.
Site and facilities staff are often the first to spot these:
- Fire-rated sealant that has cracked or shrunk back
- Head-of-wall gaps with no fire seal
- Openings left by services added after handover
- Seals disturbed by maintenance and left open
For a hotel such as Alverbank Hotel, 0.6 miles south of Privett, penetration seals are worth checking after any refit or services upgrade.
What to look for in a quote
- How long is the guarantee, and what does it include?
- Will failed sealant be removed rather than covered?
- The named product and why it was chosen
- Their approach to joint depth and backing
Fire stopping for commercial buildings in Privett
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. We work on cable penetrations, service gaps in risers and pipe penetrations, and the failures we’re asked to look at most are fire seals cut back for extra cables and never reinstated and fire-rated sealant that has cracked or shrunk back. Facilities teams, main contractors and managing agents in Privett tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Fire-rated sealing in a place like Privett is normally a single building at a time. Send the specification, drawings or photographs of the openings and we’ll quote to suit.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- Privett (PO12, PO13)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Quoting for work in Privett
Each job is priced on its own details. The things that drive the figure:
- Location, for remote and island sites
- Joint width, depth and condition
- Site requirements such as inductions and permits
- Whether old sealant has to be cut out first
What a job costs comes down to the quantity of joints, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
What we need to price the job
It doesn’t need to be a full survey. These details are enough to start:
- The type of building and who uses it
- Where the site is, with the postcode
- Clear photos of the problem areas
- Anything awkward about access or site hours
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or call 01277 525 020 or email the details over if you’d rather talk the job through.
Privett: questions and answers
What happens to BS 476 references for fire stopping in Privett?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Can you work in a care home near Privett with residents in?
Yes. We work around residents’ routines, a room or two at a time. Noise and disruption are kept to a minimum.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
How long does a typical visit take?
It depends on the scope, but the work typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we’ll set out a timescale with the quote.
How do I request a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.
How much does the work cost?
That depends on the job: quantities, access, the product and any phasing. Call for a quote and we’ll price it properly.
How the job changes by surface
Plastic pipes
Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail, and we will never swap a specified collar for sealant.
Small ducts
We seal around ducts only within what the tested detail covers. The ductwork, its supports and any dampers are for the ductwork contractor.
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Privett. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Where services cross fire walls in Privett
Privett lies roughly 67 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls, and the gaps need sealing with the specified product. A number of hotels sit less than 2 miles from Privett. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
For an estates team at a campus like University of Portsmouth - North Zone, 2.7 miles to the east of Privett, summer M&E works are usually followed by a round of penetration sealing. At a college such as St Vincent College, which lies north-east of Privett, checking penetration seals after summer M&E works is good practice.
Privett is about 1 mile south-west of Gosport, in Hampshire. Anywhere in PO12, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. 723 places across Hampshire fall within our area, Privett among them.
Business premises anywhere in PO12 and PO13 are within our area for service penetrations. For a building on Bay Road, Gomer Lane and Vectis Road or nearby, we can quote for service penetrations. We also cover Alverstoke (1 mile south-east), Clayhall (1 mile south-east), Haslar (2 miles south-east), Portsmouth Point (2 miles east) and Portsea (2 miles east). Bigger towns within reach include Havant (9 miles north-east), Eastleigh (14 miles north-west), Fareham (4 miles north), Horndean (10 miles north-east), Hedge End (10 miles north-west) and Waterlooville (8 miles north-east).
What’s near Privett
We work on buildings around Wiltshire Lamb pub, Bay House School and St Vincent College, among other places. For rail, the closest station is Portsmouth Harbour station, roughly 2.3 miles east. A little further out are Tricorn Centre (3.1 miles east) and Search (1.5 miles east). Open spaces near Privett include West of the River Alver and Portsdown Hill.
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Keep general-purpose fillers away from compartment walls
- Settle who seals which penetrations at the start of a project
- Report damaged or disturbed seals as soon as they’re spotted
- Check with the data sheet before painting over fire sealant
Never top up a fire seal with foam, ordinary silicone or filler. A repair should use the original product, installed the same way unless the designer specifies otherwise.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
From enquiry to sign-off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence, and our waste is bagged and taken away as we go. What matters most for a job in Privett is a clear list of what needs doing, so send photographs of each area. You will then get a fixed price for the work.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
What we need from you
- For older buildings, check the asbestos register before work
- Tell us what induction or permit system the site runs
- Make sure the joints can be reached
Ask for a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.