Fire-rated sealing and fire stopping in Poyle, Slough
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Poyle and the surrounding area. Send photos or drawings for a fixed quote.
- Snag lists that include open service penetrations
- Unsealed joints where partitions meet the slab
- Expanding foam used as fire stopping
Fire stopping near Poyle
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What the job involves on each surface
Drylining partitions
Plasterboard partitions are tested as a specific construction. The sealant detail has to be tested in that wall type, with the stated board layers first.
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. The detail limits bundle size and the gaps between and around cables and we work within those limits.
Fire stopping in Poyle
Facilities managers in Poyle often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. Most enquiries involve seals disturbed by maintenance and left open and improvised or mixed-product fire seals, across pipe penetrations, linear gaps at wall heads and service gaps in risers. For commercial sealant work in Poyle, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Smaller places such as Poyle still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Every job we finish is backed by a 12-month workmanship guarantee, in Poyle as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Location
- Poyle (SL3)
- Wider area
- Slough
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What sets the cost
Your fixed quote is built from the real scope. It takes account of:
- The site’s rules and procedures
- The total length or number of joints
- Backing rod, priming and other preparation
- Location, for remote and island sites
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
What we need to price the job
The more we know, the firmer the quote. Helpful details to send:
- When you need the work done
- Whether the building will be occupied during the work
- A wide shot and a close-up of the area
- The product your specification calls for
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Why deal with it now?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. Converted and older buildings near places like Poyle tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Why us?
- Our applicators hold CSCS cards
- Sealing commercial buildings since 2005
- A fixed quote before work starts
- 12 months’ guarantee on every job
Take a look at what affects the cost or how we’re accredited.
Questions we’re asked in Poyle
What does the BS 476 change mean for fire-rated sealant in Poyle?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Is hospital work, at somewhere like Ashford Hospital, something you do?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Can you handle several sites?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Do you cover Poyle?
Yes. Sites across Poyle are covered.
Does weather matter for sealant work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Can staff carry on working while you are here?
In the majority of cases, yes. Phased work can be planned so areas stay in use.
Service penetrations in Poyle buildings
The area within 2 miles of Poyle holds plenty of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. Poyle is about 18 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls; the gaps need the specified seal.
On a hospital site such as Ashford Hospital (3 miles south-east of Poyle), fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits. Industrial units on estates such as Lakeside Industrial Estate, 0.7 miles north-east of Poyle, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. In a hotel such as Arora Park Hotel, less than half a mile to the north of Poyle, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Poyle is about 3 miles north of Staines-upon-Thames, in Slough. Across the SL3 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Poyle is one of 11 places in Slough on our list for service penetrations. Our London page has more on work in that area, about 18 miles away.
Postcode districts covered here: SL3 for service penetrations. We cover commercial and managed buildings on Poplar Close, Sherborne Close and Bath Road. If your building is just outside Poyle, we cover Colnbrook (1 mile north-west), Horton (1 mile south-west), Brands Hill (1 mile west), Stanwell Moor (1 mile south-east) and Sunnymeads (2 miles west). Bigger towns within reach include Slough (5 miles north-west), Cippenham (6 miles north-west), Chalvey (5 miles north-west), Britwell (6 miles north-west), Langley (3 miles north-west) and Upton (4 miles north-west).
Landmarks near Poyle
Recent enquiries here include premises near Langley Grammar School, Arthur Jacob Nature Reserve and The Punch Bowl pub. The closest station to Poyle is Heathrow Terminal 5 Rail station, roughly 1.2 miles south-east. Nearby you’ll also find Spelthorne Museum (3.2 miles south) and Windsor Castle (3.9 miles west). For a walk, there’s Crane Meadows and Staines Reservoirs.
Nearby places to Poyle
More services for Poyle
How a job runs
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Smaller jobs around Poyle can be grouped with others nearby. A fixed quote is given before anything starts.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Share your working hours and any access restrictions
- Point out any areas we must not close
- Clear stock, furniture or equipment away from the joints
Request a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call 01277 525 020 or send photos by email.
Read more
Work for main contractors and building owners
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
General trades versus a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.