Fire stopping in Pilley Bailey
Looking for fire stopping in Pilley Bailey? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Head-of-wall gaps with no fire seal
- Openings left by services added after handover
- Improvised or mixed-product fire seals
Fire stopping for businesses in Pilley Bailey
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Common problems we fix in Pilley Bailey
Some service penetrations were never sealed at all because they sat out of sight above a ceiling or inside a riser. They come to light during inspections, refits or when another trade lifts a tile.
It’s worth sending us details if you spot any of the following:
- Openings found when ceilings come down for a refit
- Fire stopping installed outside its tested range
- Old intumescent sealant that has split away
- Fire seals cut back for extra cables and never reinstated
Hospital estates such as Lymington New Forest Hospital, 1.5 miles to the south-west of Pilley Bailey, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Before you book anyone
- Who will actually carry out the work
- Whether primer will be used where the manufacturer specifies it
- How they’ll work around occupants
- Are they CHAS accredited or on Constructionline?
Fire stopping for commercial buildings in Pilley Bailey
Most of our fire stopping work happens after the building is up. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, often unnoticed. We close the openings listed on your schedule, using the specified sealant and detail. We work on service gaps in risers, pipe penetrations and linear gaps at wall heads, and the usual reasons a site gets in touch are hidden openings found during inspections and fire-stopping items raised at inspection or handover. Whether you call it commercial sealant work, mastic application or joint sealing, in Pilley Bailey it comes down to the same thing: the right product in a properly prepared joint.
Barn and farm-building conversions near places like Pilley Bailey often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Place
- Pilley Bailey (SO41)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Surface by surface
Small ducts
Ducts are only sealed with sealant where the detail allows it. The ductwork, its supports and any dampers are for the ductwork contractor.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We work through the areas on your schedule methodically and tell you about openings outside the list.
From enquiry to sign-off
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Jobs in and around smaller places like Pilley Bailey are usually planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Agree which areas must stay open
- Send any specification or drawings in advance
- Make sure the joints can be reached
Getting a fixed quote
To get a fixed quote, ring 01277 525 020 or email drawings and photos with the site address and an outline of the work. You can also send details through our quote form.
Read more
Maintenance after handover
Cleaning and maintenance staff play a part too. Pass these on to them:
- File the specified details where the next contractor can find them
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Don’t let anyone top up a fire seal with the wrong product
- Agree the fire-stopping specification before services go in
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown, and report them promptly.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. Then the seal goes in while the area is open.
Penetration seals near Pilley Bailey
Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Holiday works at schools like William Gilpin Church of England Primary School often leave service openings to seal before pupils return. Halls and meeting rooms at places like Saint Nicholas Chapel sometimes gain new services, and any compartment wall crossed needs the specified seal.
Pilley Bailey is about 2 miles north-east of Lymington, in Hampshire. Looking for fire stopping in Pilley Bailey? We can help. 723 places across Hampshire fall within our area, Pilley Bailey among them. We also cover Southampton, some 11 miles away.
We cover the SO41 postcode districts for service penetrations. Close to Pilley Bailey, our area also takes in Bull Hill (1 mile south-east), Pilley (1 mile south-west), Portmore (1 mile south), Warborne (1 mile south-west) and Boldre (1 mile west). A short drive away, we cover Eastleigh (15 miles north-east), Fareham (15 miles east), Totton (9 miles north), Chandler's Ford (15 miles north-east), Hedge End (13 miles north-east) and Romsey (14 miles north).
Around Pilley Bailey
We work on buildings around Southlands School and the streets around them. The closest station to Pilley Bailey is Lymington Town station, about 1.9 miles south. A little further out are St Barbe Museum and Art Gallery (2.1 miles south-west) and Lymington New Forest Hospital (1.5 miles south-west). Not far away are Boldre Foreshore.
FAQs: Pilley Bailey
What happens to BS 476 references for fire stopping in Pilley Bailey?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Is Pilley Bailey off your patch?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Can you fit around our working hours?
We’re in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
Is colour matching possible?
That depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
Honest limits
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Approving the work on behalf of building control
- Fire risk assessments, a job for a competent assessor
Not sure which it is? You can ring 01277 525 020 or send photos by email and we will tell you honestly before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Cable penetrations
- Pipe penetrations
- Linear gaps at wall heads
More services for Pilley Bailey
Quoting for work in Pilley Bailey
The price varies from site to site. It mainly depends on:
- Quantities, in metres or numbers
- Travel to remote or island sites
- Removal of failed or old sealant
- How accessible the joints are
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Before you send an enquiry
The more we know, the firmer the quote. Helpful details to send:
- Anything awkward about access or site hours
- The type of building and who uses it
- Approximate linear metres or a joint schedule
- Asbestos survey details if the building is older
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or call 01277 525 020 or email us if you’d rather talk the job through.