Petworth fire stopping
Need fire stopping in Petworth? It’s simple: send details, get a quote, we seal, guaranteed.
- Fire stopping installed outside its tested range
- Unsealed openings around new pipes and cables
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping for Petworth sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in Petworth
Facilities managers in Petworth often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you’re dealing with open linear gaps along the top of fire-resisting walls and old intumescent sealant that has split away, we can put it right, on pipe penetrations, service gaps in risers and cable penetrations alike. Whether you call it commercial sealant work, mastic application or joint sealing, in Petworth it comes down to the same thing: the right product in a properly prepared joint.
Barn and farm-building conversions near places like Petworth often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Petworth (GU28)
- Region
- West Sussex
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
What the job involves on each surface
Plastic pipes
Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail.
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers, and we work within it.
Common problems we fix in Petworth
Some seals fail because the wrong product went in: builders’ foam or ordinary silicone used to fill a hole. It may look closed, but it has no tested fire performance in that position.
Clients normally get in touch after noticing something like this:
- Seals that don’t match their tested detail
- Snag lists that include open service penetrations
- Fire sealant pulled out of the opening
- Damaged fire seals in risers and voids
Hotels such as The Angel Hotel (to the north-east of Petworth) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Before you book anyone
- What the guarantee covers, and for how long
- Will RAMS and insurance details be available?
- Their pre-qualification and accreditations
- Who will actually carry out the work
From enquiry to sign-off
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Smaller jobs around Petworth can be grouped with others nearby. A fixed quote is given before anything starts.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Point out any areas we must not close
- Send asbestos survey details if the building is pre-2000
- Send your site hours and access windows
Get a fixed quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Related advice
Owners, agents and contractors
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Your questions answered
Will you take on work at estates like Hampers Common Industrial Estate, close to Petworth?
Yes. We cover Petworth and the area around it, including industrial estates, business parks and retail parks such as Hampers Common Industrial Estate. To start, just phone 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Can work in a care setting near Petworth go ahead while residents are there?
Yes. We agree rooms and times with the manager and work a few areas at a time. We follow the home’s own procedures throughout.
Can you send site paperwork?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Do you guarantee your work?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Are you insured?
Yes. We’re fully insured, including public liability cover.
How long does a typical visit take?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
Why deal with it now?
Sealing behind the M&E trades area by area beats a sweep at the end. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. Around Petworth, it’s better to renew all the failing joints at once, rather than one at a time. Send photographs of each area and we’ll quote for the lot.
What a job costs comes down to how many linear metres there are, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.
Why clients in Petworth choose us
- Health and safety: CHAS accredited
- 12 months’ guarantee on every job
- A fixed quote before work starts
- Commercial sealant work since 2005
Read what affects the cost and how we’re accredited.
Aftercare for building managers
A few simple habits keep the new joints working:
- File the specified details where the next contractor can find them
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Ask which product is in place before decorating
- Don’t let anyone top up a fire seal with the wrong product
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, and it helps at inspections.
Towns and villages near Petworth
Other services in Petworth
Compartments and services around Petworth
For England, the fire stopping of penetrations is dealt with in Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. The area within 2 miles of Petworth holds a number of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
In a school such as Petworth Cof E Primary School, fire-rated sealant goes in around service penetrations where it is specified. Halls and meeting rooms at places like Sacred Heart Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
Petworth is about 12 miles north-east of Chichester, in West Sussex. Businesses, contractors and managing agents in Petworth can call on us for service penetrations, as part of our coverage of West Sussex. 373 places across West Sussex fall within our area, Petworth among them. Brighton is covered too, around 23 miles from Petworth.
Postcode districts covered here: GU28. For a building on Station Road, Back Lane and Rosemary Lane or nearby, we can quote for service penetrations. Being close to the A272 and A283, Petworth is straightforward for us to reach. Sites close to Petworth are covered too, including Hampers Green (1 mile north), Haslingbourne (1 mile south-east), Tillington (1 mile west), Rotherbridge (1 mile south-west) and Upperton (1 mile north-west). Further afield, our area takes in Horsham (14 miles north-east), Worthing (14 miles south-east), Bognor Regis (14 miles south), Chichester (12 miles south-west), Littlehampton (12 miles south) and Rustington (13 miles south).
Around Petworth
Recent enquiries here include premises near The Old Square Tavern. For rail, the closest station is Pulborough station, about 4.4 miles south-east of the centre. Other landmarks nearby include Coates Castle (2.6 miles south) and Coultershaw Heritage Site (1.2 miles south). Open spaces near Petworth include The Mens.