Peaslake fire stopping
Planning work on a service penetration in Peaslake? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Unsealed joints where partitions meet the slab
- Fire seals cut back for extra cables and never reinstated
- Penetration schedules that need working through
Fire stopping in Peaslake
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Questions about Peaslake
Do you take on work at healthcare sites like St. Luke’s Hospital?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Is Peaslake off your patch?
No. Small places get the same service as large ones. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
Can you reseal penetrations after our M&E works?
Yes, where there is a specification for those walls and floors. Openings left by new services are among the most common jobs we see.
Do you guarantee your work?
Yes. Our workmanship is backed for 12 months.
Is BS 476 being phased out?
From 2 September 2029, Approved Document B in England drops its references to BS 476 classes, with transitional arrangements set by the Government. After that, the European classification under BS EN 13501-2 is the route. Your designer will choose products with the right evidence.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
How long does a job like this take?
The duration is planned around your programme and the access we are given. You will have an expected duration with the quote.
Fire stopping for commercial buildings in Peaslake
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls. We close the openings listed on your schedule, using the specified sealant and detail. If you’re dealing with damaged fire seals in risers and voids and open linear gaps along the top of fire-resisting walls, we can put it right. Searching for sealant specialists in Peaslake? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Around smaller places like Peaslake, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
Work we carry out in Surrey comes with a 12-month guarantee. If an installation problem shows up, ring 01277 525 020 or email us and we will arrange a return visit.
- Where
- Peaslake (GU5)
- Wider area
- Surrey
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Why it’s worth doing now in Peaslake
The longer openings stay, the more there tend to be: each new service adds to the list. Keeping on top of it after each round of works keeps the job small, rather than turning into a full building survey and reseal. Around Peaslake, it’s better to renew all the failing joints at once. Photos of every joint help us quote for the whole job.
The price depends on how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote when you’re ready.
Why appoint us
- Over 20 years of commercial sealing
- Constructionline member for supplier checks
- Health and safety: CHAS accredited
- Specification-led, product-correct work
Read how commercial sealant jobs are priced and our accreditations.
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. If others near Peaslake need work, visits can be combined. You will have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Explain the parking and delivery arrangements
- Tell staff and tenants when we’ll be in
- For older buildings, check the asbestos register before work
Quotes
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, phone 01277 525 020 or send details through our quote form.
Related advice
Looking after the joints
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Brief every trade that openings they make must be sealed
- Treat an open penetration as a priority repair
- Settle who seals which penetrations at the start of a project
- Ask which product is in place before decorating
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail using the same product.
Keep a register of where seals are and what they are made of. It tells the next contractor exactly what to reinstate, which saves guesswork.
Towns and villages near Peaslake
Also in Peaslake
What the job involves on each surface
Drylining partitions
Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do.
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point against the detail’s limits, and any that don’t are flagged.
When it isn’t the sealant
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Writing the fire-stopping specification
- Approving the work on behalf of building control
- Reviewing a building’s overall fire safety
Not sure which it is? You can call the office on 01277 525 020 or email drawings and photos and we’ll tell you honestly before you book.
Where we work in Peaslake
- Linear gaps at wall heads
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Cable penetrations
For managing agents and facilities managers
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Penetration seals near Peaslake
Peaslake is about 26 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail.
Halls and meeting rooms at places like Church of St Mark sometimes gain new services, and any compartment wall crossed needs the specified seal. Large healthcare estates like St. Luke’s Hospital, 5.8 miles north-west of Peaslake, change their services often, so penetration seals are worth checking after M&E work. Hotels such as Hurtwood Hotel, under half a mile south-west of Peaslake, rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Peaslake is about 6 miles south-west of Dorking, in Surrey. Any commercial site in Peaslake is covered. Our Surrey coverage takes in 379 places, from busy centres to rural villages. Sites around London have their own page, roughly 26 miles from Peaslake.
We take on service penetrations across the GU5 postcode area, for business premises of every kind. Buildings on Pond Lane, Peaslake Lane and Walking Bottom are within our area for service penetrations. Close to Peaslake, our area also takes in Holmbury St Mary (1 mile east), Farley Green (2 miles west), Pitland Street (2 miles east), Ewhurst (3 miles south) and Ewhurst Green (3 miles south). Further afield, our area takes in Guildford (7 miles north-west), Woking (10 miles north-west), Epsom (12 miles north-east), Horley (12 miles east), Redhill (12 miles east) and Farnham (15 miles west).
Landmarks near Peaslake
Peaslake’s nearest station is Gomshall station, about 1.8 miles north. Well-known places in the area include Abinger Castle (1.8 miles east) and St. Luke’s Hospital (5.8 miles north-west). Green spaces nearby include Combe Bottom and Leith Hill.