The Mastic Doctor team standing beside their branded vans outside an office building
Greater London · England

Fire stopping in North Sheen

Commercial sealant work in North Sheen for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.

  • Expanding foam used as fire stopping
  • Hidden openings found during inspections
  • Fire-stopping items raised at inspection or handover
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Signed off, with 12 months’ guarantee.
London, the South East & Scotland
CHAS & Constructionline
£5m public liability

Fire stopping across North Sheen

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Fire stopping for commercial buildings in North Sheen

We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. What we bring is careful installation of the specified sealant, to the maker’s guidance in North Sheen and nearby. If you are dealing with open linear gaps along the top of fire-resisting walls and fire stopping installed outside its tested range, we can put it right, on pipe penetrations, joints between fire-resisting walls and floors and service gaps in risers alike. Most enquiries from North Sheen start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.

In a London area such as North Sheen, buildings are refitted often, and every new cable, pipe or duct through a fire-resisting wall or floor leaves a gap. Each service penetration gets fire-rated or intumescent sealant if that’s what is specified, laid to the product’s tested arrangement.

Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.

Location
North Sheen (TW9, SW14, W4)
Region
Greater London
Cover
12 months on every job
Quote
A fixed quote before we start
Phone
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Compartment walls and floors in North Sheen

Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail. The area within 2 miles of North Sheen holds a good number of hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.

Refits at places like Kew Retail Park, less than half a mile to the north of North Sheen, often reroute services through walls between units. For a site team at a college like Ealing and West London College, which lies north-west of North Sheen, fire-rated sealing is best scheduled after the summer works. In a hotel such as Kew Gardens Hotel, less than half a mile west of North Sheen, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.

North Sheen is about 3 miles south of Acton, in Greater London. We cover North Sheen and the rest of Greater London, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Our Greater London coverage takes in 764 places, from busy centres to rural villages. London is covered too, some 8 miles away.

If you need fire stopping in TW9, SW14 and W4, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Kent Road, Ibis Lane and The Avenue, and sites on any of them can send details for a fixed quote. Sites close to North Sheen are covered too, including Kew (1 mile north), Grove Park (1 mile north-east), Strand-on-the-Green (1 mile north), East Sheen (1 mile south-east) and Mortlake (1 mile south-east). Bigger towns within reach include London (8 miles east), City of Westminster (6 miles north-east), Marylebone (6 miles north-east), Kensington (4 miles north-east), St Pancras (8 miles north-east) and Shoreditch (9 miles east).

Local landmarks in North Sheen

Around North Sheen, our work takes us to commercial buildings near Kew College Prep, Dukes Meadows and Chiswick School, among other places. There’s a railway station in North Sheen itself: Kew Gardens station. Well-known places in the area include Barnes Hospital (1.1 miles south-east) and Livat Hammersmith (2.5 miles north-east). The countryside around North Sheen includes Kew Gardens Lake and Duke's Hollow.

Map of North Sheen © OpenStreetMap contributors

What we can’t put right

Sealant solves a lot, but not everything, and we’re upfront when that’s the case. These need a different solution:

  • Plastic pipes whose detail calls for a collar or wrap
  • Construction that lacks the fire resistance the seal relies on
  • Signing off or certifying a building’s fire stopping

Not sure which it is? You can ring 01277 525 020 or send photos by email and we will tell you honestly before you book.

What we seal

  • Linear gaps at wall heads
  • Small duct penetrations where the tested detail allows
  • Joints between fire-resisting walls and floors
  • Cable penetrations
  • Service gaps in risers
  • Pipe penetrations

On site: what to expect

Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Most London premises stay occupied while we’re on site, so we agree zones and timings with the building or facilities manager. Phased work keeps the rest of the building in use.

  1. We ask for the product and detail your designer has specified.
  2. Openings are measured and grouped by detail.
  3. Old or wrong materials are cut out.
  4. Mineral wool or other backing is fitted where required.
  5. We gun the sealant in to the specified depth around each service and tool it.
  6. Completed areas are checked with you, with the records agreed when we quoted.

Preparing the site

  • Tell us your opening times and when work is allowed
  • Confirm the product named in the specification
  • Send asbestos survey details if the building is pre-2000

Quotes

Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.

Ask for a quote

Related advice

Keeping the joints sound

After handover, a little attention goes a long way:

  • Foam or ordinary sealant is never a fire-seal repair
  • Get seals inspected before ceilings and boxing close
  • Brief every trade that openings they make must be sealed
  • Ask the designer to confirm details early on refits

Give the sealant its full cure time before ceilings, boxing or decoration go over it. Not every fire-rated product can be painted, so check the product data first.

Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small compared with dozens found at once.

Your questions answered

Can you seal penetrations in a hotel in North Sheen after a refit?

Yes. We install fire-rated and intumescent sealant where it is specified. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.

Is Kew Retail Park, near North Sheen, within your area?

Yes, sites like Kew Retail Park are within our area, along with the rest of North Sheen. To start, just call 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.

What’s the quickest route to a quote?

There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.

What will the job cost?

Each job is quoted on its own details. To get one, phone 01277 525 020 or send photos by email with a description of the work.

Do you work in North Sheen?

Yes. We take on work across North Sheen.

Are your applicators CSCS-carded?

Yes. Our applicators hold CSCS cards, as many construction sites ask for.

How long will the new sealant last?

There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.

Work for main contractors and building owners

Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. North Sheen can form part of a wider programme.

FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.

General trades versus a specialist

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.

What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.

How the job changes by surface

Plastic pipes

Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail.

Metal pipes

Sealant details often cover copper and steel pipework. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail, so we check each one.

Accreditations

Trusted. Accredited. Insured.