Fire stopping in North Benfleet
Fire-rated and intumescent sealing of service penetrations and linear gaps in North Benfleet. CHAS accredited and fully insured, with a 12-month guarantee.
- Openings found when ceilings come down for a refit
- Seals disturbed by maintenance and left open
- Head-of-wall gaps with no fire seal
Fire stopping for North Benfleet sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in North Benfleet: the local picture
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. North Benfleet is about 27 miles from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls, and the gaps need sealing with the specified product.
Holiday works at schools like Montgomerie Primary School often leave service openings to seal before pupils return. Hospital estates such as Basildon University Hospital (3.7 miles west of North Benfleet) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
North Benfleet is about 2 miles west of Thundersley, in Essex. Anywhere in SS13, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. North Benfleet is one of 644 places we cover in Essex. Our London page has more on work in that area (27 miles or so).
Business premises anywhere in SS13 and SS12 are within our area. For a building on London Road, Pound Lane and Katherine Road or nearby, send details and we’ll quote for service penetrations. If your building is just outside North Benfleet, we cover Bowers Gifford (1 mile south-west), Tarpots (1 mile south-east), Pitsea (1 mile west), Nevendon (1 mile north) and South Benfleet (2 miles south-east). A short drive away, we cover Chelmsford (11 miles north), Basildon (3 miles west), Brentwood (10 miles west), Maldon (12 miles north-east), Canvey Island (4 miles south-east) and Billericay (6 miles north-west).
Local landmarks in North Benfleet
In North Benfleet, that means premises near Chalvedon School and Appleton School. The closest station to North Benfleet is Pitsea station, about 1.5 miles south-west. Well-known places in the area include Eastgate Shopping Centre (3.2 miles west) and Basildon University Hospital (3.7 miles west). Not far away are Bowers Marsh RSPB Reserve.
About our fire stopping in North Benfleet
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, give us a call on 01277 525 020 or email a schedule or drawings with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. If you are dealing with openings left by services added after handover and builders’ foam or ordinary silicone in compartment walls, we can put it right, on joints between fire-resisting walls and floors, linear gaps at wall heads and cable penetrations alike. Whoever orders the work in North Benfleet, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Rural conversions around North Benfleet can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Work we carry out in Essex comes with a 12-month guarantee. Should something we installed fail, phone 01277 525 020 or email drawings and photos and we will come back to it.
- Location
- North Benfleet (SS13, SS12)
- Region
- Essex
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
FAQs: North Benfleet
Is hospital work, at somewhere like Basildon University Hospital, something you do?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
What does the BS 476 change mean for fire-rated sealant in North Benfleet?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and we will price the work to it.
Can you work while the building is occupied?
Yes, with some planning. Tell us your site hours and access windows and we’ll plan around them.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
Does weather matter for sealant work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
What sealant work can’t fix
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Approving the work on behalf of building control
- Gaps in walls that were never built as compartment walls
- Openings that need collars, wraps, batts or boards rather than sealant
Not sure which it is? You can call 01277 525 020 or email drawings and photos and we will tell you honestly.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
Owners, agents and contractors
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Keeping the joints sound
Problems stay small when the joints are checked regularly. In particular:
- Put resealing into every M&E and fit-out package
- Keep product data and details in the fire safety file
- Check risers and ceiling voids after each round of works
- Report damaged or disturbed seals as soon as they’re spotted
Keep the product data and installation details with the building’s fire safety information. Anyone resealing later needs to know which product and detail were used.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match.
On site: what to expect
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. For a building around North Benfleet, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
What we need from you
- Flag any permit to work we will need
- Arrange parking or a loading space
- Share your working hours and any access restrictions
Ask for a quote
For a fixed quote, call the office on 01277 525 020 or email a schedule or drawings, telling us the site location and the nature of the job. Our quote form is another easy route.
Read more
When to call us in North Benfleet
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps, and a product not tested for that movement may crack. The tested detail for a linear joint states the width and movement it covers.
Look out for the following:
- Service penetrations left open after M&E works
- Open linear gaps along the top of fire-resisting walls
- Fire seals cut back for extra cables and never reinstated
- Improvised or mixed-product fire seals
For a unit at a site such as Burnt Mills Industrial Estate, which lies north-west of North Benfleet, new power or data runs between office and warehouse can breach a compartment wall.
Before you book anyone
- Are they CHAS accredited or on Constructionline?
- Their plan for phasing and protecting the area
- Will failed sealant be removed rather than covered?
- Who will actually carry out the work
Surface by surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point against the detail’s limits, and any that don’t are flagged.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. If the gap exceeds the tested range, sealant alone won’t do, and the detail may call for board patching or another product.