Fire Stopping in Newton Valence
Sealant work in Newton Valence for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Unsealed openings around new pipes and cables
- Open linear gaps along the top of fire-resisting walls
- Fire-rated sealant that has cracked or shrunk back
Fire stopping in Newton Valence
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our fire stopping in Newton Valence
Most of our fire stopping work happens after the building is up. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, and they are easy to forget. We close the openings listed on your schedule, using the specified sealant and detail. Site teams most often ask us about fire stopping installed outside its tested range and fire-stopping items raised at inspection or handover, across service gaps in risers, joints between fire-resisting walls and floors and cable penetrations. Searching for sealant specialists in Newton Valence? We’ve been sealing commercial buildings since 2005.
A job near Newton Valence is typically planned around one visit, with the specification and photos sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Location
- Newton Valence (GU34)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Building owners, agents and FMs in Newton Valence
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
Nearby places to Newton Valence
Other services in Newton Valence
Common problems we fix in Newton Valence
Some seals fail because the wrong product went in: builders’ foam or ordinary silicone used to fill a hole. It may look closed, but it has no tested fire performance in that position and has to be removed.
It’s worth sending us details if you spot any of the following:
- Old intumescent sealant that has split away
- Fire stopping installed outside its tested range
- Unsealed openings around new pipes and cables
- Damaged fire seals in risers and voids
In a building such as Church of St Mary, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Questions to ask before you book
- How they handle RAMS and site documents
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How they’ll work around occupants
- Whether old or failed sealant will be cut out, not overlaid
Cost factors for service penetrations
Your fixed quote is built from the real scope. It allows for:
- Which sealant the job calls for
- Joint width, depth and condition
- Phasing around occupants
- Distance, for remote addresses
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- Photos of the joints, close up and from further back
- Access details, including height
- Any specification or named product
- The postcode of the building
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or phone 01277 525 020 or email the details over if you’d rather talk the job through.
How a job runs
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. For a building around Newton Valence, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Let us know about inductions and permits
- Tell us which areas need to stay in use
- Tell us your opening times and when work is allowed
Get a fixed quote
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, give us a call on 01277 525 020 or email drawings and photos.
Advice
Your questions answered
Will you take on work at estates like Farringdon Industrial Centre, close to Newton Valence?
Yes. We cover Newton Valence and the area around it, including industrial estates, business parks and retail parks such as Farringdon Industrial Centre. Photos and a short description are enough for a first look.
Can you work on a hospital site such as Alton Community Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Do the same rules apply to fire stopping in Scotland?
Our work covers Greater London, the South East and every Scottish council area. Scotland’s non-domestic Technical Handbook, clause 2.1.14, expects service penetrations to be fire stopped to at least the wall or floor’s fire resistance, using products tested for their end use.
Is BS 476 being phased out?
In England, references to the older BS 476 national classes are being removed from Approved Document B from 2 September 2029, with transitional arrangements set by the Government. The European route, BS EN 13501-2, then applies. Your designer will choose products with the right evidence.
When is resealing likely to be due?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Will you sign off the seals for us?
No. Approval sits with the designer, principal designer or building control. We’ll confirm the product and detail installed, and you can tell us what other records you need at quote stage.
How long does a typical visit take?
The duration is planned around your programme and the access we’re given. You’ll have an expected duration with the quote.
Keeping the joints sound
A few simple habits keep the new joints working:
- Record which product was used where
- Have penetrations checked while they can still be seen
- Report damaged or disturbed seals as soon as they’re spotted
- Agree the fire-stopping specification before services go in
Allow the manufacturer’s stated cure time before boxing in or decorating. Some fire-rated sealants accept paint and some don’t.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.
What sealant work can’t fix
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Openings that need collars, wraps, batts or boards rather than sealant
- Gaps in walls that were never built as compartment walls
- Approving the work on behalf of building control
If in doubt, call 01277 525 020 or email us and we will say what we think.
Joints and surfaces we work on
- Linear gaps at wall heads
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
Fire stopping around Newton Valence: points for this area
In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. Newton Valence lies roughly 47 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product.
At a healthcare site like Alton Community Hospital (3.4 miles north of Newton Valence), new services through compartment walls are a constant, and each needs the specified seal. Where a unit on an estate such as Farringdon Industrial Centre, which lies north-west of Newton Valence, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Newton Valence is about 4 miles south of Alton, in Hampshire. We cover commercial sites throughout Newton Valence, for single jobs and planned programmes alike. Across Hampshire, 723 places are covered, including Newton Valence. Sites around Portsmouth have their own page, roughly 20 miles from Newton Valence.
Business premises anywhere in GU34 are within our area for service penetrations. We also cover Selborne (1 mile east), Empshott (2 miles east), Lower Green (3 miles south-east), Hawkley (3 miles south-east) and Oakshott (3 miles south) for service penetrations. Bigger towns within reach include Basingstoke (13 miles north-west), Winchester (15 miles west), Fleet (14 miles north-east), Horndean (13 miles south), Aldershot (14 miles north-east) and Alton (4 miles north).
Local landmarks in Newton Valence
The nearest railway station is Alton station, about 4.2 miles north of the centre. Other landmarks nearby include Alton Community Hospital (3.4 miles north) and The Romany Museum (1.4 miles east). Not far away are Selborne Hill and Liss Riverside Railway Walk North.