Neasden fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Neasden and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Unsealed openings around new pipes and cables
- Fire-stopping items raised at inspection or handover
- Non-fire-rated filler around services
Fire stopping near Neasden
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
On site: what to expect
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. Planning a London job such as one in Neasden starts with access: booked loading, goods lifts, the building’s permit system and a spot to keep materials. Give us the hours we can be on site and we will schedule to suit.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Send any specification or drawings in advance
- Arrange parking or a loading space
- Tell us your opening times and when work is allowed
Quotes
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, phone 01277 525 020 or send photos by email.
Read more
About our fire stopping in Neasden
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in. If you have snag lists that include open service penetrations and fire-rated sealant that has cracked or shrunk back, we can put it right, whatever the surface. Searching for sealant specialists in Neasden? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Taller residential buildings in London may fall under the Building Safety Act’s higher-risk regime, where fire-stopping records get close attention. Our part is installing the specified fire-rated sealant; tell us what records you need and we will confirm with the quote.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application.
- Location
- Neasden (NW10, NW2, NW9)
- Wider area
- Greater London
- Guarantee
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
General trades versus a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
What we’re called out for in Neasden
A common fault is a product that was never fire-rated in the first place: builders’ foam or ordinary silicone used to fill a hole. It may look closed, but it has no tested fire performance in that position.
It’s worth sending us details if you spot any of the following:
- Unsealed openings around new pipes and cables
- Builders’ foam or ordinary silicone in compartment walls
- Open linear gaps along the top of fire-resisting walls
- Snag lists that include open service penetrations
At a university such as Middlesex University (2.8 miles north of Neasden), labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work.
Before you book anyone
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- The terms of the workmanship guarantee
- Whether primer will be used where the manufacturer specifies it
- Whether old or failed sealant will be cut out, not overlaid
Why deal with it now?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. In Neasden, each extra visit means more notices, permits and disruption, so cutting the old sealant out fully and doing it right once is the better route.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What you get with us
- A fixed quote before work starts
- Specification-led, product-correct work
- CHAS accredited
- Constructionline member for supplier checks
Take a look at how commercial sealant jobs are priced or our accreditations and insurance.
Neasden: questions and answers
Do you work on fire-rated sealing in hotels in Neasden?
Yes, where the specification calls for fire-rated sealant. We match the product to the wall or floor and the services, and say if something other than sealant is needed.
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Neasden?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Will you quote for a small job?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Can the building stay open while you work?
Usually, yes. We phase the work so most of the building stays in use.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
What affects the price in Neasden
A fixed quote reflects the actual work. It allows for:
- The size and state of each joint
- Quantities, in metres or numbers
- How much existing material needs removing
- Access and working height
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
What to include in your enquiry
For an accurate fixed quote, we need to understand the site. Send us:
- Clear photographs of the problem areas
- Asbestos survey details if the building is older
- Approximate linear metres or a joint schedule
- Any dates the work must fit around
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Also near Neasden
Also in Neasden
Fire-rated sealing for Neasden buildings
In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Either way, we install the specified product to its tested detail. In London buildings, frequent fit-outs and M&E changes are a common reason fire stopping gets breached. Penetrations are sealed with the specified product, to its tested detail, under the building’s own permit rules.
Tenant changes at centres like Brent Cross Shopping Park, 1.5 miles north-east of Neasden, often mean new services through walls between units. Industrial units on estates such as Falcon Park Industrial Estate, less than half a mile to the west of Neasden, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Neasden is about 5 miles north-west of City of Westminster, in Greater London. Any commercial site in Neasden is covered. 764 places across Greater London fall within our area, Neasden among them. Our London page has more on work in that area, about 8 miles away.
Anyone looking for fire stopping in NW10, NW2 and NW9 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Dog Lane, High Road and Ilex Road or nearby, send details and we’ll quote for service penetrations. We also cover Brent Park (1 mile west), Church End (1 mile south), Willesden (1 mile south-east), Dollis Hill (1 mile north-east) and Willesden Green (1 mile south-east). Further afield, our area takes in London (8 miles south-east), City of Westminster (5 miles south-east), Marylebone (5 miles south-east), Kensington (4 miles south-east), St Pancras (6 miles east) and Shoreditch (8 miles east).
Around Neasden
In Neasden, that means premises near Gladstone Park, The Swaminarayan School and Crest Boys' Academy. For rail, the closest station is Brent Cross West station, about 1.3 miles north-east of the centre. Nearby you will also find Neasden Hospital (0.7 miles south-west) and London Designer Outlet (1.7 miles west). Green spaces nearby include Westbere Copse and Castlebar Hill.
Work for main contractors and building owners
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Neasden. Several sites can go on one quote, so there’s one set of paperwork to deal with.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.