Millwall fire stopping
Work needed on a service penetration in Millwall? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Open linear gaps along the top of fire-resisting walls
- Snag lists that include open service penetrations
- Non-fire-rated filler around services
Need fire stopping in Millwall?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Millwall
Facilities managers in Millwall often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. Most enquiries involve unsealed openings around new pipes and cables and improvised or mixed-product fire seals, on cable penetrations, linear gaps at wall heads and joints between fire-resisting walls and floors. For commercial sealant work in Millwall, you deal with one contact from quote to sign-off, whether it’s one building or several.
Taller residential buildings in London may fall under the Building Safety Act’s higher-risk regime, where fire-stopping records get close attention. Our part is installing the specified fire-rated sealant; tell us what records you need and we will confirm with the quote.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Place
- Millwall (E14, SE8, SE10)
- Wider area
- Greater London
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Do you need fire stopping in Millwall?
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are what we find most often.
If one of these sounds familiar, it’s time for a closer look:
- Fire-rated sealant that has cracked or shrunk back
- Unsealed openings around new pipes and cables
- Hidden openings found during inspections
- Open linear gaps along the top of fire-resisting walls
Wherever services are added at a hospital such as Blackheath Hospital (2.1 miles south-east of Millwall) the compartment line has to be made good with the specified product.
Before you book anyone
- Will CSCS-carded applicators be on site?
- The terms of the workmanship guarantee
- Do they follow the manufacturer’s priming guidance?
- How they’ll work around occupants
After the work
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Settle who seals which penetrations at the start of a project
- Record which product was used where
- Check risers and ceiling voids after each round of works
- Report damaged or disturbed seals as soon as they’re spotted
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original unless the designer specifies otherwise.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.
When it isn’t the sealant
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Approving the work on behalf of building control
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Gaps in walls that were never built as compartment walls
If you’re not sure, just call the office on 01277 525 020 or email drawings and photos and we will give you a straight answer.
Joints and surfaces we work on
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
Cost factors for service penetrations
To price the job, we consider:
- Access and working height
- The size and state of each joint
- Whether the work must be split into stages
- The site’s rules and procedures
The price depends on how many linear metres there are, what has to come out first and the access. Call for a fixed quote when you’re ready.
What to include in your enquiry
The more we know, the firmer the quote. When you get in touch, include:
- A wide shot and a close-up of the area
- The product your specification calls for
- The site address and postcode
- Anything awkward about access or site hours
For a fixed quote, call 01277 525 020 or email us, telling us the site location and the nature of the job. You can also send details through our quote form.
From enquiry to sign-off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes anything from one day to a planned run of visits, depending on the number of seals and the access, and we clear our waste as we work. The ULEZ covers the whole of Greater London, and parking near a job is rarely simple. Let us know about any on-site parking or loading arrangements when you send the job details.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Arrange parking or a loading space
- Tell staff and tenants when we will be in
- Clear stock, furniture or equipment away from the joints
Quotes
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, ring 01277 525 020 or use the quote form.
Advice
Towns and villages near Millwall
Other services in Millwall
Should maintenance staff do it?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Fire stopping in Millwall: the local picture
There are plenty of hotels within about 2 miles of Millwall. In hotels, bedroom and corridor walls are typically fire-resisting, so services added in a refit need sealing with the specified product. Every new tenant in a London building tends to bring new cabling, and with it new holes through compartment walls. Where fire-rated sealant is specified, we install it to the tested detail under the building’s permit-to-work arrangements.
At a college such as Bellerbys College London (0.5 miles south of Millwall), checking penetration seals after summer M&E works is good practice. Residences at universities like University of Greenwich - Greenwich Campus, 0.7 miles south-east of Millwall, have compartment walls that must be resealed whenever services change.
Millwall is about 1 mile north-west of Greenwich, in Greater London. We cover Millwall, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Our Greater London coverage takes in 764 places, large and small.
We take on service penetrations across the E14, SE8 and SE10 postcode area, for business premises of every kind. Streets here include Creek Road, Wynan Road and Undine Road. Sites close to Millwall are covered too, including North Greenwich (1 mile east), Isle of Dogs (1 mile east), Deptford (1 mile south), Cubitt Town (1 mile north-east) and Greenwich (1 mile south-east). Further afield, our area takes in London (3 miles west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (8 miles west), St Pancras (5 miles north-west) and Shoreditch (4 miles north-west).
Local landmarks in Millwall
Recent enquiries here include premises near Canary Wharf College 3, St. Paul's and Mudchute Park and Farm. You’ll also find The Ferry House Public House (less than half a mile south-east) and Laban Centre (0.6 miles south). Millwall’s nearest station is Deptford station, about 0.8 miles south-west. Other landmarks nearby include Surrey Quays Shopping Centre (1.2 miles west) and Old Royal Naval College (0.7 miles south-east). For a walk, there’s Tower Hill and Sue Godfrey Nature Park.
Millwall: questions and answers
Can you work in a care home near Millwall with residents in?
Yes. Care settings are planned area by area, at times agreed with the home. We follow the home’s own procedures throughout.
Can you work at a site such as Brookmarsh Industrial Estate, by Millwall?
Yes, sites like Brookmarsh Industrial Estate are within our area, along with the rest of Millwall. A few photographs and the unit address let us price the work.
What will the job cost?
It depends on the job: quantities, access, the product and any phasing. Call for a fixed quote and we will price it properly.
Do you approve fire stopping for building control?
No. We don’t certify or sign off fire stopping, and we hold no third-party fire-stopping installer certificate. We work to the specification and the manufacturer’s installation guidance, and any records you need can be confirmed with the quote.
How do I request a quote?
The quote form is the simplest route, though you can also speak to us on 01277 525 020 or send photos by email. Photos, drawings or a joint schedule help us quote quickly.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Do you have public liability insurance?
Yes. We’re fully insured, and the certificate can go with your quote.