Millerhill fire stopping
Work needed on a service penetration in Millerhill? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Fire-rated sealant that has cracked or shrunk back
- Improvised or mixed-product fire seals
- Hidden openings found during inspections
Fire stopping across Millerhill
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our fire stopping in Millerhill
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. We work on joints between fire-resisting walls and floors, service gaps in risers and pipe penetrations, and the usual reasons a site gets in touch are snag lists that include open service penetrations and fire seals cut back for extra cables and never reinstated. For commercial sealant work in Millerhill, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
In smaller Scottish places like Millerhill, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Those penetrations are closed with the product the specification names, built up as tested.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Millerhill (EH22)
- Region
- Midlothian
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Doing it in-house
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
What the job involves on each surface
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. The detail limits bundle size and the gaps between and around cables and we work within those limits.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers.
What we can’t put right
Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:
- Large openings beyond what any sealant detail covers
- Approving the work on behalf of building control
- Walls or floors that aren’t fire-resisting to begin with
If you are not sure, just ring 01277 525 020 or send photos by email and we will give you a straight answer before you book.
Where we work in Millerhill
- Pipe penetrations
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
Diagnose, treat, sign off
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs near Millerhill are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Agree which areas must stay open
- Flag any permit to work we’ll need
- Send your site hours and access windows
Getting a fixed quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or give us a call on 01277 525 020 or email the details over if you’d rather talk the job through.
Related advice
Quoting for work in Millerhill
The price varies from site to site. Expect it to depend on:
- Joint width, depth and condition
- Removal of failed or old sealant
- Distance, for remote addresses
- Access and working height
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
Details that help us quote
There’s no need for a formal survey. A few details are enough to get going:
- The asbestos register, for older buildings
- Photos of the joints, close up and from further back
- Drawings or a marked-up plan, if available
- Your programme or deadline
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Also near Millerhill
More services for Millerhill
Service penetrations in Millerhill buildings
The 2 miles around Millerhill include two care or nursing homes. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail. A 2-mile radius around Millerhill takes in a number of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Colleges such as Edinburgh College - Midlothian Campus (to the south of Millerhill) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product. Office fit-outs on sites such as Scotway Business Centre (to the west of Millerhill) add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. Tenant changes at centres like Craigmillar Shopping Centre, 2.4 miles to the north-west of Millerhill, often mean new services through walls between units.
Millerhill is about 2 miles north-west of Dalkeith, in Midlothian. Millerhill sits inside our coverage and the rest of Midlothian, with the same fixed quotes and 12-month guarantee as everywhere else. Millerhill is one of 34 places in Midlothian on our list.
Work on service penetrations is covered throughout EH22. If your site is on Wymet Grove, Wymet Gardens and Cocklerow Loan or close by, send details and we will quote for service penetrations. If your building is just outside Millerhill, we cover Newton Village (1 mile west), Shawfair (1 mile north-west), Old Craighall (1 mile north-east), Newcraighall (2 miles north) and Whitecraig (2 miles east). A short drive away, we cover Bonnyrigg (3 miles south), Penicuik (8 miles south-west), Loanhead (4 miles south-west), Gorebridge (5 miles south), Newtongrange (3 miles south) and Mayfield (3 miles south-east).
Landmarks near Millerhill
Recent enquiries here include premises near Drum Park, among other places. Millerhill has its own railway station: Shawfair station. Other landmarks nearby include Musselburgh Doll Museum (2.3 miles north-east) and Dalkeith Palace (1.1 miles south-east). Open spaces near Millerhill include The New Leaf Co-op and Nether Hill.
Why it’s worth doing now in Millerhill
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Resealing early avoids that.
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why appoint us
- One number for every site we cover
- Commercial sealant work since 2005
- Public liability insurance in place
- Health and safety: CHAS accredited
Take a look at what affects the cost and our accreditations and insurance.
Questions we’re asked in Millerhill
Is hospital work, at somewhere like Shawfair Park Hospital, something you do?
Yes, hospitals are one of the sectors we cover. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you seal around new services in a hotel near Millerhill?
Yes, where the specification calls for fire-rated sealant. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Are you CHAS accredited?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
What about RAMS and site documents?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to.