Milford on Sea fire stopping
Sealant work in Milford on Sea for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Service penetrations left open after M&E works
- Fire stopping installed outside its tested range
- Seals disturbed by maintenance and left open
Fire stopping for businesses in Milford on Sea
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Leave it or put it right?
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. Putting it right is typically a modest job when the openings are accessible. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. A failed joint lets water into a building whatever its size. Early resealing avoids the damage that follows a leak.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why appoint us
- Our applicators hold CSCS cards
- Joints cleaned back to sound surfaces
- Public liability insurance in place
- Fixed quotes based on photos, drawings or a visit
Read what affects the cost or our accreditations.
Fire stopping in Milford on Sea, done properly
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. We work on service gaps in risers, pipe penetrations and cable penetrations, and the usual reasons a site gets in touch are unsealed openings around new pipes and cables and fire-stopping items raised at inspection or handover. A single leaking joint is often how a building in Milford on Sea first comes to us: we look at the rest while we are there and tell you what we find.
In places the size of Milford on Sea, fire-resisting walls and floors are found in schools, care homes, health centres and mixed-use buildings. Specified fire-rated sealant goes around new services there, built to match the manufacturer’s detail.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Where
- Milford on Sea (SO41)
- Region
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Aftercare for building managers
For the best life from the joints:
- Flag new cables with no seal around them
- Foam or ordinary sealant is never a fire-seal repair
- Agree the fire-stopping specification before services go in
- Leave fire sealant to cure fully before covering it
Once the seals are in, tell other trades they exist and must not be disturbed. Any seal cut back for a new service needs reinstating to its tested detail.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there instead of being left for someone else.
When something else is needed
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Openings that need collars, wraps, batts or boards rather than sealant
- Fire doors, dampers or other fire safety equipment
- Signing off or certifying a building’s fire stopping
If in doubt, speak to us on 01277 525 020 or email drawings and photos and we will say what we think before you book.
Joints and surfaces we work on
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Pipe penetrations
How the quote is worked out
Before we quote, we look at:
- Induction, permit and paperwork requirements
- The size and state of each joint
- Working within restricted access windows
- How accessible the joints are
Pricing service penetrations depends on quantities, condition and access. Ask us for a fixed quote.
Before you send an enquiry
A few photographs plus some basic facts will normally do. It helps to include:
- Rough lengths or quantities, or drawings if you have them
- Whether an asbestos survey exists
- Clear photographs of the problem areas
- What the building is and how it’s used
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
Places near Milford on Sea
Other services in Milford on Sea
Compartment walls and floors in Milford on Sea
For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. The area within 2 miles of Milford on Sea holds a number of hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
At a healthcare site like Lymington New Forest Hospital, 3.6 miles north-east of Milford on Sea, new services through compartment walls are a constant, and each needs the specified seal. For a hotel such as Milford House Hotel, which lies north-east of Milford on Sea, penetration seals are worth checking after any refit or services upgrade.
Milford on Sea is about 3 miles south-west of Lymington, in Hampshire. We cover Milford on Sea and the rest of Hampshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 723 places in Hampshire, large and small. There’s a separate page for Southampton, about 16 miles away.
We take on service penetrations across the SO41 postcode area, for business premises of every kind. Among the streets we cover are High Street, Love Lane and Greenbanks Close, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Lymore (1 mile north-east), Keyhaven (1 mile east), Everton (1 mile north), Lower Pennington (2 miles north-east) and Pennington (2 miles north-east). Nearby towns on our patch include Totton (14 miles north), Hythe (13 miles north-east), New Milton (4 miles north-west), Ringwood (12 miles north-west), Barton on Sea (3 miles west) and Dibden Purlieu (12 miles north-east).
Around Milford on Sea
Locally, jobs take us to sites close to The Red Lion Public House and Priestlands School. For rail, the closest station is Lymington Town station, about 3.4 miles north-east. A little further out are Yarmouth Castle (4.3 miles east) and Lymington New Forest Hospital (3.6 miles north-east). The countryside around Milford on Sea includes Milford on Sea LNR and Tennyson Down.
Questions we are asked in Milford on Sea
Do you work in occupied care homes around Milford on Sea?
Yes. Care settings are planned area by area, at times agreed with the home. Noise and disruption are kept to a minimum.
What does the BS 476 change mean for fire-rated sealant in Milford on Sea?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Do you have public liability insurance?
Yes. We’re fully insured, including public liability cover.
Do you cover Milford on Sea?
Yes. We cover Milford on Sea, and you can call the office on 01277 525 020 or send details through our quote form to get started.
How do I request a quote?
You can use the quote form on this site; alternatively, call 01277 525 020 or email us. Include photos or drawings if you have them.
How long will the new sealant last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
From enquiry to sign-off
When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, with the work itself normally taking a single visit for a short list of penetrations, or a phased programme for a whole building. Several jobs near Milford on Sea can be grouped on one trip. Mention the building’s opening times and we will work within them.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- Send your site hours and access windows
- Tell us which areas need to stay in use
- Explain the parking and delivery arrangements
Ask for a quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, give us a call on 01277 525 020 or email us.
Read more
Signs you need fire stopping in Milford on Sea
Plenty of openings were simply never closed, often hidden above suspended ceilings or behind boxing. Inspections, refurbishments and ceiling access normally bring them to light.
Any of the following is a good reason to get the joints checked over:
- Fire stopping installed outside its tested range
- Seals disturbed by maintenance and left open
- Expanding foam used as fire stopping
- Head-of-wall gaps with no fire seal
Schools such as Milford-on-Sea Church of England Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Comparing quotes
- The terms of the workmanship guarantee
- Can the work be phased to keep areas open?
- Which product they’ll use, and why it suits the joint
- How joint depth will be controlled