Liurbost fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps in Liurbost. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Expanding foam used as fire stopping
- Penetration schedules that need working through
- Fire sealant pulled out of the opening
Fire stopping for Liurbost sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in Liurbost
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls. Those on your schedule are closed with the specified product. If you are dealing with fire-rated sealant that has cracked or shrunk back and unsealed joints where partitions meet the slab, we can put it right, whatever the surface. Facilities teams, main contractors and managing agents in Liurbost tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around smaller places such as Liurbost, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Liurbost (HS2)
- Region
- Na h-Eileanan Siar
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
How the quote is worked out
Each job is priced on its own details. The main factors are:
- The product specified
- How accessible the joints are
- How much existing material needs removing
- Phasing around occupants
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
Before you send an enquiry
However big the job, the same details help:
- The type of building and who uses it
- When you need the work done
- Anything awkward about access or site hours
- The site address and postcode
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, phone 01277 525 020 or email the details over.
Compartment walls and floors in Liurbost
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. Work on Liurbost has to fit the ferry timetable and the forecast. The specification and photos of each penetration let us bring the right products first time.
Buildings near Liurbost get the fire-rated product that’s specified, installed to its tested detail.
Liurbost is in Na h-Eileanan Siar. Across the HS2 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our Na h-Eileanan Siar coverage takes in 87 places.
If you need fire stopping in HS2, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Macdonald Gardens, Liurbost and Kennedy View or close by, send details and we’ll quote for service penetrations. If your building is just outside Liurbost, we cover North Lochs (1 mile east), Crosbost (1 mile east), Lacasaidh (3 miles south-west), Marybank (6 miles north) and Stornoway (6 miles north-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Liurbost
Other landmarks nearby include Ravenspoint Centre Museum (3.9 miles south). Open spaces near Liurbost include Nisreaval and Loch na Craoibhe.
Signs you need fire stopping in Liurbost
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
Clients normally get in touch after noticing one or more of the following:
- Fire stopping installed outside its tested range
- Non-fire-rated filler around services
- Service penetrations left open after M&E works
- Fire seals cut back for extra cables and never reinstated
Halls and meeting rooms at places like Parish Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
Before you book anyone
- Whether their applicators hold CSCS cards
- How they’ll work around occupants
- Will failed sealant be removed rather than covered?
- What the guarantee covers, and for how long
Questions about Liurbost
How do the Scottish rules apply to fire-rated sealing in Liurbost?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Can you produce the fire-stopping design for a job in Liurbost?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
How long do sealant joints last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Can the sealant be colour-matched?
That depends on the product specified. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
How soon can the area be used again?
We will confirm how long the chosen product needs to cure.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Building owners, agents and FMs in Liurbost
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
When to bring in a specialist
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
On site: what to expect
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Travel to smaller Scottish places like Liurbost is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Confirm the product named in the specification
- Make sure the joints can be reached
- Arrange parking or a loading space
Quotes
To get a fixed quote, phone 01277 525 020 or send details through our quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Related advice
What else we do in Liurbost
What the job involves on each surface
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. The detail limits bundle size and the gaps between and around cables, so we check before sealing.
Small ducts
Some fire-rated sealant details cover small ducts. Larger or fire-rated ductwork typically needs a different solution set by the designer and we flag that rather than guess.