Fire-rated sealing and fire stopping in Little London, Buckinghamshire
Fire-rated and intumescent sealing of service penetrations and linear gaps in Little London and across Buckinghamshire. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Snag lists that include open service penetrations
- Unsealed openings around new pipes and cables
- Old intumescent sealant that has split away
Fire stopping near Little London
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Different surfaces, different methods
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point so we know it sits within the tested range, and any outside it are raised with you.
Metal pipes
Metal pipes conduct heat, so their details often call for extra measures along the pipe, and the tested detail may ask for insulation beyond the wall. We follow whatever the detail requires and flag anything we can’t match.
Fire stopping in Little London, done properly
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. If you’re dealing with fire stopping installed outside its tested range and open linear gaps along the top of fire-resisting walls, we can help, on linear gaps at wall heads, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows alike. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Little London is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller places like Little London, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Little London (HP18)
- Region
- Buckinghamshire
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Why deal with it now?
Sealing behind the M&E trades area by area beats a sweep at the end. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. Halls, stores and units around places like Little London may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
What you get with us
- 12 months’ guarantee on every job
- Work to your specification and the manufacturer’s guidance
- Old sealant cut out, never sealed over
- Fixed quotes based on photographs, drawings or a visit
Take a look at what affects the cost or our accreditations and insurance.
Compartment walls and floors in Little London
Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Little London is about 47 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
In a hotel such as Sun Hotel, 1.2 miles north-east of Little London, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. Industrial units on estates such as Rushbeds Industrial Estate, 2.2 miles to the north-east of Little London, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. Halls and meeting rooms at places like Church of St Mary sometimes gain new services, and any compartment wall crossed needs the specified seal.
Little London is about 6 miles north-west of Thame, in Buckinghamshire. If you’re looking for fire stopping in Little London, we can help, as we do across Buckinghamshire. 308 places across Buckinghamshire fall within our area, Little London among them. Our Oxford page has more on work in that area, about 8 miles away.
Postcode districts covered here: HP18. If your site is on Brill Road, Bicester Road and The Nap or close by, send details and we will quote for service penetrations. Nearby places we also cover include Oakley (1 mile west), Brill (1 mile north-east), Piddington (3 miles north), Ludgershall (3 miles north) and Blackthorn (5 miles north). Further afield, our area takes in Aylesbury (11 miles east), Buckingham (14 miles north), Elmhurst (11 miles east), Southcourt (11 miles east), Princes Risborough (12 miles south-east) and Haydon Hill (10 miles east).
What’s near Little London
Locally, jobs take us to sites close to The Royal Oak pub. Nearby you’ll also find Thame Community Hospital (5.9 miles south-east) and Waterperry Gardens Rural Museum (3.9 miles south). Not far away are Bernwood Meadows.
Your questions answered
Would you work within a site like Thame Community Hospital?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
What happens to BS 476 references for fire stopping in Little London?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
How much does the work cost?
Every job gets its own fixed quote. To get one, give us a call on 01277 525 020 or email a schedule or drawings with a description of the work.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact.
How do we ask for a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.
Can staff carry on working while you’re here?
Usually, yes. Phased work can be planned so areas stay in use.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Honest limits
We check first that sealant really is the fix. It won’t put right:
- Fire doors, dampers or other fire safety equipment
- Openings that need collars, wraps, batts or boards rather than sealant
- Approving the work on behalf of building control
Not sure which it is? You can ring 01277 525 020 or send details through our quote form and we will tell you honestly.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
- Cable penetrations
- Linear gaps at wall heads
What sets the cost
Each job is priced on its own details. The things that drive the figure:
- The size and state of each joint
- Phasing around occupants
- How accessible the joints are
- Site requirements such as inductions and permits
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Sending details for a quote
A few photographs plus some basic facts will normally do. It helps to include:
- Where the site is, with the postcode
- Anything awkward about access or site hours
- What the building is and how it’s used
- The product your specification calls for
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
On site: what to expect
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. If others near Little London need work, visits can be combined. You will have a fixed quote before work starts.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Tell us which areas need to stay in use
- Confirm the product named in the specification
- Flag any permit to work we’ll need
Request a quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to call the office on 01277 525 020 or send details through our quote form.
Read more
Also near Little London
More services for Little London
Building owners, agents and FMs in Little London
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, with CSCS-carded applicators on site.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.