Letcombe Regis fire stopping
Need fire stopping in Letcombe Regis? It’s simple: send details, get a quote, we seal, guaranteed.
- Fire seals cut back for extra cables and never reinstated
- Unsealed penetrations discovered above suspended ceilings
- Service penetrations left open after M&E works
Fire stopping for businesses in Letcombe Regis
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Letcombe Regis
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4, with results classified under BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. Reproducing the tested arrangement on site is the part we take care of. We work on service gaps in risers, pipe penetrations and linear gaps at wall heads, and the failures we are asked to look at most are snag lists that include open service penetrations and openings found when ceilings come down for a refit. Facilities teams, main contractors and managing agents in Letcombe Regis tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Smaller places such as Letcombe Regis still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Letcombe Regis (OX12)
- Wider area
- Oxfordshire
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Why act early in Letcombe Regis
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed. Converted and older buildings near places like Letcombe Regis tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
Pricing service penetrations depends on how many there are, their condition and the access, plus any specification you are working to. Ask us for a fixed quote.
What you get with us
- Sealing commercial buildings since 2005
- Clear, fixed quotes
- Work carried out by CSCS-carded applicators
- Work to your specification and the manufacturer’s guidance
Take a look at what affects the cost or our accreditations.
Nearby places to Letcombe Regis
More services for Letcombe Regis
What we can’t put right
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- Gaps in walls that were never built as compartment walls
- Issuing fire ratings or certificates for seals
- Fire risk assessments, a job for a competent assessor
If you’re not sure, just give us a call on 01277 525 020 or send details through our quote form and we will give you a straight answer before you book.
Surfaces we seal
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Service gaps in risers
On site: what to expect
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. If others near Letcombe Regis need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Agree which areas must stay open
- Tell us your opening times and when work is allowed
- Flag any permit to work we’ll need
Quotes
Send us photos, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Read more
Work for main contractors and building owners
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
Fire stopping around Letcombe Regis: points for this area
Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Either way, we install the specified product to its tested detail. Letcombe Regis has five care or nursing homes no more than 2 miles away. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product.
At a healthcare site like Wantage Community Hospital, 1.7 miles north-east of Letcombe Regis, new services through compartment walls are a constant, and each needs the specified seal. Halls and meeting rooms at places like Church of St Andrew sometimes gain new services, and any compartment wall crossed needs the specified seal. For a unit at a site such as W&G Industrial Estate, 1.5 miles to the north of Letcombe Regis, new power or data runs between office and warehouse can breach a compartment wall.
Letcombe Regis is about 2 miles south-west of Wantage, in Oxfordshire. If you are looking for fire stopping in Letcombe Regis, we can help. Across Oxfordshire, 423 places are covered, Letcombe Regis among them. Our Oxford page has more on work in that area (15 miles or so).
Work on service penetrations is covered throughout OX12. If your site is on Main Street, Greyhound Mews and Old Manor Court or close by, we can quote for service penetrations. Nearby places we also cover include East Challow (1 mile north), Letcombe Bassett (1 mile south-west), Childrey (1 mile north-west), West Challow (1 mile north-west) and Wantage (2 miles north-east). Nearby towns on our patch include Oxford (15 miles north-east), Didcot (9 miles east), Abingdon-on-Thames (10 miles north-east), Witney (15 miles north), Carterton (15 miles north-west) and Faringdon (8 miles north-west).
Local landmarks in Letcombe Regis
In Letcombe Regis, that means premises near St Mary's School, The Greyhound Public House and Betjeman Millennium Park, among other places. Well-known places in the area include Williams F1 Grand Prix Collection (3.3 miles north-east). Not far away are Letcombe Valley and Chain Hill.
Quoting for work in Letcombe Regis
The price varies from site to site. It mainly depends on:
- Travel to remote or island sites
- How accessible the joints are
- How much existing material needs removing
- How much there is to seal
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What we need to price the job
There’s no need for a formal survey. These details are enough to start:
- Whether the building will be occupied during the work
- Asbestos survey details if the building is older
- Specification clauses that apply
- Photos of the joints, close up and from further back
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. If you have questions first, give us a call on 01277 525 020 or email drawings and photos.
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Questions we are asked in Letcombe Regis
Do you take on work at healthcare sites like Wantage Community Hospital?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Do you work in occupied care homes around Letcombe Regis?
Yes. Care settings are planned area by area, at times agreed with the home. Noise and disruption are kept to a minimum.
Are you members of a third-party fire-stopping installer scheme?
No. We don’t hold a third-party fire-stopping installer certificate. Our credentials are CHAS accreditation, Constructionline membership and CSCS-carded applicators, and we are fully insured. Where a client or main contractor requires a scheme member, we’ll say so right away rather than waste your time.
Who decides which product is used?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
What do you charge?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote and we’ll price it properly.