Fire stopping in Kenardington
Need fire stopping in Kenardington? It’s simple: send details, get a quote, we seal, guaranteed.
- Penetration schedules that need working through
- Improvised or mixed-product fire seals
- Openings left by services added after handover
Fire stopping across Kenardington
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Kenardington, done properly
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. The enquiries we see most involve fire stopping installed outside its tested range and old intumescent sealant that has split away, on cable penetrations, pipe penetrations and linear gaps at wall heads. Most enquiries from Kenardington start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Smaller places such as Kenardington still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Kenardington (TN26)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Your questions answered
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Kenardington?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Can you work at a site such as Meadow View Business Park, by Kenardington?
Yes. Our area takes in Kenardington and its surroundings, with estates and business parks such as Meadow View Business Park included. To start, just call 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Can you work while the building is occupied?
Normally, yes. We phase the work so most of the building stays in use, with each area protected and signed.
Is Kenardington in your area?
Yes. Kenardington falls within our area, and the simplest way to start is to ring 01277 525 020 or email a schedule or drawings.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
What happens if it’s left?
Inspections and handover checks often pick up fire stopping. Late discoveries can delay handover while openings are reopened and resealed which is why earlier is better. Halls, stores and units around places like Kenardington may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
What you get with us
- Failed material removed, not covered up
- Clear, fixed quotes
- Constructionline member for supplier checks
- CHAS accredited
Take a look at our cost guide or our accreditations and insurance.
Other services in Kenardington
Where services cross fire walls in Kenardington
Kenardington lies roughly 50 miles out from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls. In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Office fit-outs on sites such as Meadow View Business Park (2.7 miles east of Kenardington) add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Kenardington is about 6 miles south-west of Ashford, in Kent. Our applicators travel to Kenardington for work on service penetrations, handled exactly as we handle every other area. We work across 931 places in Kent, large and small. Brighton is covered too, some 44 miles away.
Work on service penetrations is covered throughout TN26, whatever the building. Just outside Kenardington, we also work in Hamstreet (2 miles east), Orlestone (2 miles north-east), Snargate (3 miles south-east), Bromley Green (3 miles north-east) and Ruckinge (3 miles east). A short drive away, we cover Ashford (6 miles north-east), Folkestone (15 miles east), Hythe (12 miles east), Tenterden (5 miles west), Cheriton (14 miles east) and Kennington (8 miles north-east).
Landmarks near Kenardington
We work on buildings around World's Wonder pub and the streets around them. The nearest railway station is Appledore (Kent) station, about 1.8 miles south of the centre. A little further out are Woodchurch Village Life Museum (2.7 miles north-west). Not far away are Orlestone Forest.
Building owners, agents and FMs in Kenardington
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
What affects the price in Kenardington
Before we quote, we look at:
- Location, for remote and island sites
- Quantities, in metres or numbers
- Any access equipment needed
- Joint width, depth and condition
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What we need to price the job
A few photos plus some basic facts will normally do. It helps to include:
- Asbestos survey details if the building is older
- Any specification or named product
- The postcode of the building
- Approximate linear metres or a joint schedule
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
What we’re called out for in Kenardington
Plenty of openings were simply never closed because they sat out of sight above a ceiling or inside a riser. They come to light during inspections, refits or when another trade lifts a tile.
What tends to prompt an enquiry:
- Service penetrations left open after M&E works
- Snag lists that include open service penetrations
- Unsealed joints where partitions meet the slab
- Hidden openings found during inspections
Halls and meeting rooms at places like Church of St Mary sometimes gain new services, and any compartment wall crossed needs the specified seal.
Comparing quotes
- Which product they’ll use, and why it suits the joint
- Health and safety accreditation such as CHAS
- Whether their applicators hold CSCS cards
- The terms of the workmanship guarantee
Our process
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For a building around Kenardington, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
What we need from you
- Flag any permit to work we’ll need
- For older buildings, check the asbestos register before work
- Tell staff and tenants when we’ll be in
Get a fixed quote
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, speak to us on 01277 525 020 or send photos by email.
Read more
What we can’t put right
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Approving the work on behalf of building control
- Openings that need collars, wraps, batts or boards rather than sealant
- Designing or specifying fire stopping, which sits with the designer or fire engineer
Not sure which it is? You can speak to us on 01277 525 020 or email drawings and photos and we’ll tell you honestly.
What we seal
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Cable penetrations
- Pipe penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows