Fire Stopping in Horden
Commercial sealant work in Horden for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Seals that don’t match their tested detail
- Old intumescent sealant that has split away
- Unsealed joints where partitions meet the slab
Fire stopping for Horden sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle fire stopping in Horden
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and we say so if it doesn’t fit. We work on linear gaps at wall heads, small duct penetrations where the tested detail allows and cable penetrations, and the usual reasons a site gets in touch are non-fire-rated filler around services and open linear gaps along the top of fire-resisting walls. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Horden is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Barn and farm-building conversions near places like Horden often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Horden (TN17, TN12)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Aftercare for building managers
Problems stay small when the joints are checked regularly. In particular:
- Check with the data sheet before painting over fire sealant
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Keep product data and details in the fire safety file
- Get seals inspected before ceilings and boxing close
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original unless the designer specifies otherwise.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small; found late, it can be one of many.
What we can’t put right
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. It won’t fix:
- Approving the work on behalf of building control
- Writing the fire-stopping specification
- Plastic pipes whose detail calls for a collar or wrap
If you’re not sure, just call the office on 01277 525 020 or email us and we’ll give you a straight answer.
Where we work in Horden
- Cable penetrations
- Service gaps in risers
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
General trades versus a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Building owners and managing agents use us on everything from one building to a spread of sites around Horden. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Also near Horden
More services for Horden
What we’re called out for in Horden
Some service penetrations were never sealed at all, often hidden above suspended ceilings or behind boxing. Inspections, refurbishments and ceiling access typically bring them to light.
These are often picked up first by site or facilities staff:
- Penetration schedules that need working through
- Fire stopping installed outside its tested range
- Expanding foam used as fire stopping
- Fire seals cut back for extra cables and never reinstated
For a hospital such as Benenden Hospital, which lies south-east of Horden, penetration sealing is usually phased ward by ward, with infection-control rules agreed first.
Before you book anyone
- Will RAMS and insurance details be available?
- What level of public liability insurance do they hold?
- Will CSCS-carded applicators be on site?
- Are they CHAS accredited or on Constructionline?
Common questions from Horden clients
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Horden?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is a hospital such as Benenden Hospital somewhere you can work?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
How much does the work cost?
We don’t publish prices, because every site is different. With photos or drawings, we can give you a fixed quote.
Do you need to see the site first?
That depends on the size and complexity of the job. Simple work can often be priced from photographs, and bigger or more complex jobs usually get a visit.
How do you choose the sealant?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Fire stopping in Horden: the local picture
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Central London is about 36 miles from Horden. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
Schools such as Colliers Green Church of England Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Horden is about 6 miles south-east of Paddock Wood, in Kent. Looking for fire stopping in Horden? We can help. Horden is one of 931 places in Kent on our list. For work in that direction, see our Brighton page (35 miles or so).
Business premises anywhere in TN17 and TN12 are within our area for service penetrations. Streets here include Hill Top and Husheath Hill, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Colliers Green (1 mile south), Flishinghurst (2 miles south), Marden Thorn (2 miles north), Knox Bridge (2 miles east) and Cranbrook Common (3 miles east) for service penetrations. A short drive away, we cover Maidstone (9 miles north), Royal Tunbridge Wells (10 miles west), Tonbridge (11 miles north-west), Kings Hill (10 miles north-west), Foley Park (10 miles north) and Paddock Wood (6 miles north-west).
Around Horden
We work on buildings around The Gill and the streets around them. Horden’s nearest station is Marden station, about 2.9 miles north of the centre. Well-known places in the area include Sissinghurst Castle (3.6 miles east) and Brattle Farm Museum (2 miles north-east).
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. For work around Horden, we aim to finish in one visit, so we ask for photos and rough sizes first. Then the right materials arrive with us.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- Have the specification and drawings to hand
- Point out any areas we must not close
- Explain the parking and delivery arrangements
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, phone 01277 525 020 or send details through our quote form.