Fire Stopping in Hollybushes
Planning work on a service penetration in Hollybushes? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Unsealed openings around new pipes and cables
- Seals disturbed by maintenance and left open
- Seals that don’t match their tested detail
Fire stopping across Hollybushes
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Hollybushes
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal. Site teams most often ask us about penetration schedules that need working through and fire-rated sealant that has cracked or shrunk back, across small duct penetrations where the tested detail allows, joints between fire-resisting walls and floors and service gaps in risers. Whoever orders the work in Hollybushes, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
A job near Hollybushes is typically planned around one visit, with the specification and photos sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Location
- Hollybushes (ME9)
- Wider area
- Kent
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
What sets the cost
We price every job individually. The main factors are:
- Any access equipment needed
- Specialist products, such as fire-rated or hygienic sealants
- The size and state of each joint
- Removal of failed or old sealant
Pricing service penetrations depends on quantities, condition and access, and any specification that applies. Call for a quote.
Sending details for a quote
To price the job accurately, we need to understand the site. Useful things to include:
- The postcode of the building
- Photos of the joints, close up and from further back
- Your programme or deadline
- The asbestos register, for older buildings
To get a fixed quote, call the office on 01277 525 020 or email us with the site address and an outline of the work. Our quote form is another easy route.
Owners, agents and contractors
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Where services cross fire walls in Hollybushes
Hollybushes is about 39 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal. For England, the fire stopping of penetrations is dealt with in Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For a school such as Milstead and Frinsted Church of England Primary School, penetration sealing fits best at the end of the summer works. In a building such as Church of St Mary and the Holy Cross, any service penetration through a fire-resisting wall should be sealed to the specified detail. Tenant changes at parks like Kent Science Park, 1.8 miles north of Hollybushes, bring new data and services, and openings through fire-resisting walls need the specified seal.
Hollybushes is about 4 miles south of Sittingbourne, in Kent. Across the ME9 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. 931 places across Kent fall within our area, including Hollybushes. Our London page has more on work in that area (39 miles or so).
Postcode districts covered here: ME9 for service penetrations. If your building is just outside Hollybushes, we cover Bluetown (1 mile east), Milstead (1 mile north-west), Wichling (1 mile south-east), Doddington (1 mile east) and Frinsted (2 miles west). Bigger towns within reach include Maidstone (9 miles west), Ashford (12 miles south-east), Canterbury (15 miles east), Sittingbourne (4 miles north), Whitstable (13 miles east) and Faversham (7 miles east).
Landmarks near Hollybushes
Around Hollybushes, our work takes us to commercial buildings near Cromers Wood and the streets around them. Hollybushes’s nearest station is Sittingbourne station, roughly 3.7 miles north. Other landmarks nearby include Sittingbourne Heritage Museum (3.5 miles north) and Newnham Castle (2.7 miles east).
Maintenance after handover
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Arrange inspection before areas are covered up
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Ask which product is in place before decorating
- Settle who seals which penetrations at the start of a project
Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Questions about Hollybushes
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Hollybushes?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Can you work at a site such as Kent Science Park, by Hollybushes?
Yes, sites like Kent Science Park are within our area, along with the rest of Hollybushes. Send details of the unit and the work through our quote form for a quick quote.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
Which sealant will you use?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How soon can the area be used again?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Can you quote from photographs?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
On site: what to expect
Tell us your site hours and access windows and we’ll plan around them. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. If others near Hollybushes need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
What we need from you
- Flag any permit to work we will need
- Tell staff and tenants when we will be in
- Confirm the product named in the specification
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
Advice
Towns and villages near Hollybushes
Other services in Hollybushes
How the job changes by surface
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening.