Holborough fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps across Holborough, by CSCS-carded applicators. CHAS accredited and fully insured.
- Damaged fire seals in risers and voids
- Seals that don’t match their tested detail
- Old intumescent sealant that has split away
Fire stopping for businesses in Holborough
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Service penetrations in Holborough buildings
For England, the fire stopping of penetrations is dealt with in Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Holborough is about 26 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
On a hospital site such as St. Catherine's Hospital, 4.2 miles north-east of Holborough, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits. For a unit at a centre such as Horsted Retail Park, 2.9 miles to the east of Holborough, penetration seals are worth checking after each shop fit. For a building such as Church of the New Jerusalem, new heating or data runs are the usual reason penetrations need sealing.
Holborough is about 4 miles west of Chatham, in Kent. We cover commercial sites throughout Holborough. Holborough is one of 931 places in Kent on our list. For work in that direction, see our London page, about 26 miles away.
We take on service penetrations across the ME6, ME1 and ME19 postcode area, for business premises of every kind. We cover commercial and managed buildings on Lee Road, Byrne Road and Ladds Lane and the roads nearby. Just outside Holborough, we also work in Snodland (1 mile south-west), Peters Village (1 mile east), Scarborough (1 mile east), Upper Halling (1 mile north-west) and Wouldham (1 mile north-east). Bigger towns within reach include Maidstone (6 miles south-east), Sittingbourne (13 miles east), Dartford (12 miles north-west), Sevenoaks (12 miles west), Gravesend (7 miles north-west) and Tonbridge (12 miles south-west).
Landmarks near Holborough
We work on buildings around The Monks Head pub, Holborough Marshes and The Holmesdale School. Holborough’s nearest station is Snodland station, roughly 0.5 miles south. Other landmarks nearby include St. Catherine's Hospital (4.2 miles north-east) and Leybourne Castle (2.5 miles south-west). Open spaces near Holborough include Blue Bell Hill and Burham Down.
Fire stopping for commercial buildings in Holborough
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings. Tell us what records you need and we will confirm with the quote. We work on linear gaps at wall heads, small duct penetrations where the tested detail allows and cable penetrations, and the failures we are asked to look at most are fire-rated sealant that has cracked or shrunk back and non-fire-rated filler around services. Whoever orders the work in Holborough, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Fire-rated sealing in a place like Holborough is typically a single building at a time. With the specification and photographs of the gaps, we can give a fixed quote and bring the right products.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Location
- Holborough (ME6, ME1, ME19)
- Region
- Kent
- Cover
- 12 months on every job
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Towns and villages near Holborough
What else we do in Holborough
Owners, agents and contractors
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Questions we’re asked in Holborough
Can work at a site such as University for the Creative Arts - Rochester fit around teaching?
Yes. Tell us the term dates, vacation periods and access windows, and we will plan the work around them. Let us know which documents your site asks for, and we will confirm them alongside the quote.
Can you work at a site such as New Hythe Business Park, by Holborough?
Yes. Estates, retail parks and business parks around Holborough, New Hythe Business Park among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Do you guarantee your work?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Are you insured?
Yes. We are fully insured, including public liability cover.
Do the same rules apply to fire stopping in Scotland?
Building standards in Scotland are separate from England’s, and England uses Approved Document B. Wherever the site is, our work follows the specification and the tested detail.
Aftercare for building managers
To get the most from the new sealant:
- Arrange inspection before areas are covered up
- Look above ceilings when tiles are lifted for other jobs
- Put resealing into every M&E and fit-out package
- Record which product was used where
Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
What we can’t put right
Sealant solves a lot, but not everything, and we are upfront when that’s the case. It won’t fix:
- Deciding what a wall or floor needs, which belongs to the designer
- Signing off or certifying a building’s fire stopping
- Construction that lacks the fire resistance the seal relies on
Not sure which it is? You can call the office on 01277 525 020 or use the quote form and we’ll tell you honestly.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Cable penetrations
- Linear gaps at wall heads
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For a job in Holborough, the main thing is a clear picture of the work. A fixed quote follows.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out first.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Getting the site ready
- Move anything stored against the joints
- Point out parking and an unloading spot
- Let us know about inductions and permits
Get a fixed quote
To get a fixed quote, call the office on 01277 525 020 or email us with the site address and an outline of the work. Our quote form is another easy route.
Read more
What sets the cost
A fixed quote reflects the actual work. It allows for:
- Any access equipment needed
- The total length or number of joints
- The product specified
- Phasing around occupants
Pricing service penetrations depends on quantities, condition and access, plus any specification you’re working to. Ask us for a fixed quote.
Details that help us quote
However big the job, these details speed things up:
- Any dates the work must fit around
- Approximate linear metres or a joint schedule
- The product your specification calls for
- Whether the building will be occupied during the work
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or send photos by email.
Surface by surface
Small ducts
Some fire-rated sealant details cover small ducts. Bigger ducts and fire-resisting ductwork are normally handled with other products and we flag that rather than guess.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers, and we work within it.