Fire stopping in Heaverham
Commercial sealant work in Heaverham for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Penetration schedules that need working through
- Improvised or mixed-product fire seals
- Unsealed penetrations discovered above suspended ceilings
Need fire stopping in Heaverham?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Questions about Heaverham
Would you work within a site like Cygnet Hospital Godden Green?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Is Heaverham too far out for you?
No. Places such as Heaverham are covered as much as the big towns. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Are you members of a third-party fire-stopping installer scheme?
No. We are not members of a third-party fire-stopping installer scheme. Our credentials are CHAS accreditation, Constructionline membership and CSCS-carded applicators, and we are fully insured. Where a client or main contractor requires a scheme member, we will say so straight away rather than waste your time.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
About our fire stopping in Heaverham
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings and the specified product data. Tell us what records you need and we’ll confirm with the quote. Most enquiries involve seals disturbed by maintenance and left open and fire stopping installed outside its tested range, on service gaps in risers, cable penetrations and joints between fire-resisting walls and floors. Facilities teams, main contractors and managing agents in Heaverham tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around smaller places like Heaverham, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Heaverham (TN15)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Why deal with it now?
The longer openings stay, the more there tend to be: every new cable or pipe adds another. A schedule that is dealt with regularly stays manageable, rather than turning into a full building survey and reseal. Halls, stores and units around places like Heaverham may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Why clients in Heaverham choose us
- Health and safety: CHAS accredited
- Over 20 years of commercial sealing
- A Constructionline member, so easy to vet
- Products installed to the manufacturer’s instructions
What affects the price in Heaverham
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Quantities, in metres or numbers
- Travel to remote or island sites
- The size and state of each joint
- Access and working height
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What we need to price the job
However big the job, the same details help:
- The asbestos register, for older buildings
- How the joints are reached, and at what height
- The site address and postcode
- Your programme or deadline
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
Compartments and services around Heaverham
For England, the fire stopping of penetrations is dealt with in Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Heaverham is about 20 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls.
Older community buildings such as Church of St Mary that have been rewired or given new heating can have service gaps through walls worth checking against the specification. For a building at a site such as Chaucer Business Park, which lies south-west of Heaverham, a check of penetration seals after each fit-out is good practice. Hospital estates such as Cygnet Hospital Godden Green, 2.5 miles south-west of Heaverham, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Heaverham is about 3 miles north-east of Sevenoaks, in Kent. We cover commercial sites throughout Heaverham. We work across 931 places in Kent. Our London page has more on work in that area.
Postcode districts covered here: TN15 for service penetrations. Sites close to Heaverham are covered too, including Cotman's Ash (1 mile north-west), Woodlands (1 mile north), Kemsing (2 miles west), Knatts Valley (2 miles north) and Romney Street (2 miles north-west). Bigger towns within reach include Maidstone (12 miles east), Dartford (10 miles north), Sevenoaks (3 miles south-west), Royal Tunbridge Wells (12 miles south), Gravesend (10 miles north-east) and Tonbridge (7 miles south).
Near you in Heaverham
Locally, jobs take us to sites close to Wrotham School, The Chequers Public House and Kemsing Down. The closest station to Heaverham is Kemsing station, roughly 0.6 miles south-west of the centre. Nearby you will also find Otford Heritage Centre (2.5 miles west) and Kemsing Castle Bank (1 mile west). For a walk, there’s Dryhill Nature Reserve.
Owners, agents and contractors
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
On site: what to expect
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access, and our waste is bagged and taken away as we go. Rural sites near Heaverham may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Arrange parking or a loading space
- Confirm the product named in the specification
- Point out any areas we must not close
Ask for a quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, give us a call on 01277 525 020 or send details through our quote form.
Read more
Places near Heaverham
What else we do in Heaverham
When it isn’t the sealant
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Approving the work on behalf of building control
- Openings that need collars, wraps, batts or boards rather than sealant
- Writing the fire-stopping specification
If you’re not sure, just call the office on 01277 525 020 or email us and we’ll give you a straight answer.
Surfaces we seal
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
Aftercare for building managers
For the best life from the joints:
- Keep general-purpose fillers away from compartment walls
- Put resealing into every M&E and fit-out package
- Arrange inspection before areas are covered up
- Record which product was used where
Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned.