Fire-rated sealing and fire stopping in Hardwick, Oxfordshire
Fire stopping in Hardwick, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Improvised or mixed-product fire seals
- Old intumescent sealant that has split away
- Fire seals cut back for extra cables and never reinstated
Need fire stopping in Hardwick?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our fire stopping in Hardwick
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. Each seal follows the manufacturer’s tested detail, not a rule of thumb. If you have snag lists that include open service penetrations and service penetrations left open after M&E works, we can help, whatever the surface. For commercial sealant work in Hardwick, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Barn and farm-building conversions near places like Hardwick often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Hardwick (OX29)
- Wider area
- Oxfordshire
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Surface by surface
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter and we work within those limits.
Nearby places to Hardwick
More services for Hardwick
Fire stopping in Hardwick: the local picture
Hardwick lies roughly 61 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls, and the gaps need sealing with the specified product. Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
Colleges such as Abingdon & Witney College: Witney Campus, 2.9 miles to the north-west of Hardwick, add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product. For an estates team at a campus like University of Oxford (3.6 miles south of Hardwick), summer M&E works are normally followed by a round of penetration sealing. Theatres, wards and plant rooms at sites like Witney Community Hospital, 3 miles north-west of Hardwick, all have compartment walls crossed by services.
Hardwick is about 3 miles south-east of Witney, in Oxfordshire. We cover commercial sites throughout Hardwick, whether it’s a single job or part of a planned programme. Hardwick is one of 423 places we cover in Oxfordshire. Oxford is covered too, around 9 miles from Hardwick.
Postcode districts covered here: OX29 for service penetrations. Hardwick sits on or close to the B4449, useful when we plan access and materials. Nearby places we also cover include Brighthampton (2 miles south), Ducklington (2 miles north-west), Standlake (2 miles south-east), High Cogges (2 miles north) and South Leigh (2 miles north-east) for service penetrations. Further afield, our area takes in Oxford (9 miles east), Didcot (13 miles south-east), Abingdon-on-Thames (9 miles south-east), Witney (3 miles north-west), Carterton (6 miles west) and Wantage (11 miles south).
Landmarks near Hardwick
A little further out are Hinton Waldrist Castle (4.2 miles south) and Cogges Manor Farm Museum (2.6 miles north-west).
Owners, agents and contractors
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, which keeps the paperwork simple.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Your questions answered
Is Hardwick too far out for you?
Not at all. Hardwick is within our area. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Do you cover business parks and estates near Hardwick, such as Lakeside Industrial Estate?
Yes. Estates, retail parks and business parks around Hardwick, Lakeside Industrial Estate among them, are all within reach. To start, just call 01277 525 020 or email the details over with the unit, the joints involved and your access times.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
How long does a typical visit take?
It depends on the scope, but the work usually takes anything from one day to a planned run of visits, depending on the number of seals and the access. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Is fire stopping in Scotland covered by different guidance?
Our work covers Greater London, the South East and every Scottish council area. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook says service penetrations should keep at least the fire resistance of the wall or floor, with proprietary products tested for the end use.
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Writing the fire-stopping specification
- Issuing fire ratings or certificates for seals
- Large openings beyond what any sealant detail covers
If you’re not sure, just phone 01277 525 020 or use the quote form and we will give you a straight answer.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
Our process
Occupied buildings need a little choreography. We sign and contain the area we are in, keep walkways clear and move on in phases so staff and visitors can carry on around us. If others near Hardwick need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Share the asbestos register for older buildings
- Tell us your opening times and when work is allowed
- Point out parking and an unloading spot
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or email drawings and photos with what you know.
Related advice
After the work
Problems stay small when the joints are checked regularly. In particular:
- Ask the designer to confirm details early on refits
- Arrange inspection before areas are covered up
- Ask which product is in place before decorating
- Treat an open penetration as a priority repair
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts, and the work runs in step with the M&E.