Fire-rated sealing and fire stopping in Hardwick, Oxfordshire
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Hardwick. Send details for a fixed quote.
- Expanding foam used as fire stopping
- Fire seals cut back for extra cables and never reinstated
- Openings found when ceilings come down for a refit
Need fire stopping in Hardwick?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Hardwick
Facilities managers in Hardwick often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. We work on linear gaps at wall heads, joints between fire-resisting walls and floors and pipe penetrations, and the failures we are asked to look at most are penetration schedules that need working through and hidden openings found during inspections. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Hardwick is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
A job near Hardwick is typically planned around one visit, so send the specification and photos first. Design and sign-off belong to the designer or building control; we install what’s specified.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Hardwick (OX27)
- Region
- Oxfordshire
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
How the quote is worked out
Quotes vary with the job. It mainly depends on:
- Induction, permit and paperwork requirements
- Location, for remote and island sites
- Access and working height
- Specialist products, such as fire-rated or hygienic sealants
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site rules also count.
Before you send an enquiry
However big the job, the same details help:
- Where the site is, with the postcode
- Access details, including height
- When you need the work done
- Clear photos of the problem areas
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or email us.
Where services cross fire walls in Hardwick
Hardwick is about 56 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls. For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Either way, we install the specified product to its tested detail.
Halls and meeting rooms at places like Church of St Mary sometimes gain new services, and any compartment wall crossed needs the specified seal. Large healthcare estates like Bicester Community Hospital, 4.6 miles to the south of Hardwick, change their services often, so penetration seals are worth checking after M&E work. On estates like Baynards Green Trading Estate (1.8 miles west of Hardwick), the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal.
Hardwick is about 4 miles north of Bicester, in Oxfordshire. Looking for fire stopping in Hardwick? We can help, as we do across Oxfordshire. 423 places across Oxfordshire fall within our area, including Hardwick. We also cover Oxford, around 15 miles from Hardwick.
Work on service penetrations is covered throughout OX27. Just outside Hardwick, we also work in Hethe (1 mile east), Stoke Lyne (1 mile south-west), Fringford (2 miles east), Bucknell (3 miles south-west) and Stratton Audley (3 miles south-east). Further afield, our area takes in Oxford (15 miles south), Banbury (10 miles north-west), Bicester (4 miles south), Kidlington (11 miles south-west), Headington Quarry (14 miles south) and Bure Park (4 miles south).
Local landmarks in Hardwick
Around Hardwick, our work takes us to commercial buildings near Whitmore Arms Public House, among other places. The nearest railway station is Bicester North station, roughly 4.2 miles south of the centre. Nearby you will also find Ardley Castle (2.8 miles south-west) and Bicester Community Hospital (4.6 miles south).
When to bring in a specialist
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Work for main contractors and building owners
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Hardwick. Several sites can go on one quote, which keeps the paperwork simple.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Different surfaces, different methods
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and loose debris are cleared out of the opening, so the sealant and any backing sit properly.
Linear joints
Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in, along the full length of the run.
Hardwick: questions and answers
Is Hardwick too small for you to travel to?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Hardwick?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Can the building stay open while you work?
Typically, yes. Phased work can be planned so areas stay in use.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
What hours do you work?
We are in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
What we can’t put right
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Reviewing a building’s overall fire safety
- Construction that lacks the fire resistance the seal relies on
- Signing off or certifying a building’s fire stopping
Not sure which it is? You can ring 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
Surfaces we seal
- Service gaps in risers
- Pipe penetrations
- Linear gaps at wall heads
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
Towns and villages near Hardwick
Other services in Hardwick
Diagnose, treat, sign off
At the end of each section, we remove the tape, clean down and inspect every joint with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. If others near Hardwick need work, visits can be combined. You will have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Arrange parking or a loading space
- Let us know about inductions and permits
- Make sure the joints can be reached
Ask for a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.