Fire-rated sealing and fire stopping in Great Holcombe, Oxfordshire
Need fire stopping in Great Holcombe? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Fire sealant pulled out of the opening
- Penetration schedules that need working through
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping for businesses in Great Holcombe
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Great Holcombe, done properly
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you’re dealing with old intumescent sealant that has split away and fire-stopping items raised at inspection or handover, we can put it right. For commercial sealant work in Great Holcombe, you deal with one contact from quote to sign-off, whether it’s one building or several.
A job near Great Holcombe is typically planned around one visit, with the specification and photos sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Where
- Great Holcombe (OX10)
- Region
- Oxfordshire
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
What affects the price in Great Holcombe
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- The size and state of each joint
- How accessible the joints are
- Working within restricted access windows
- How much there is to seal
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What we need to price the job
A few photos plus some basic facts will normally do. It helps to include:
- Where the site is, with the postcode
- Your programme or deadline
- Approximate linear metres or a joint schedule
- A wide shot and a close-up of the area
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, ring 01277 525 020 or email a schedule or drawings.
Doing it in-house
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. If an area should be left alone while the sealant cures, we say how long and put signs out. Jobs in and around smaller places like Great Holcombe are usually planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Preparing the site
- Tell us your opening times and when work is allowed
- Flag any permit to work we will need
- Point out parking and an unloading spot
Getting a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Related advice
Towns and villages near Great Holcombe
More services for Great Holcombe
Great Holcombe: questions and answers
Is Great Holcombe too small for you to travel to?
No. Places such as Great Holcombe are covered as much as the big towns. We work across Greater London and the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you work at a site such as Monument Business Park, by Great Holcombe?
Yes. Estates, retail parks and business parks around Great Holcombe, Monument Business Park among them, are all within reach. To start, just speak to us on 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, call the office on 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What do you charge?
We don’t publish prices, as every site differs. Send photographs or drawings and we will price it at a fixed figure.
Work for main contractors and building owners
For main contractors, we work as the sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
After the work
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:
- Settle who seals which penetrations at the start of a project
- Keep product data and details in the fire safety file
- Check with the data sheet before painting over fire sealant
- Check risers and ceiling voids after each round of works
Once the seals are in, tell other trades they exist and must not be disturbed. Any seal cut back for a new service needs reinstating to its tested detail, by someone who knows the system.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small compared with dozens found at once.
Penetration seals near Great Holcombe
Great Holcombe is about 45 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail.
Large healthcare estates like Littlemore Hospital, 5.8 miles to the north-west of Great Holcombe, change their services often, so penetration seals are worth checking after M&E work. Halls and meeting rooms at places like Church of St Giles sometimes gain new services, and any compartment wall crossed needs the specified seal.
Great Holcombe is about 3 miles north of Benson, in Oxfordshire. Commercial clients in Great Holcombe use us for work on service penetrations, as part of our coverage of Oxfordshire. Great Holcombe is one of 423 places in Oxfordshire on our list for service penetrations. There’s a separate page for Oxford, roughly 8 miles from Great Holcombe.
Postcode districts covered here: OX10. Close to Great Holcombe, our area also takes in Newington (1 mile north), Drayton St Leonard (1 mile west), Brookhampton (1 mile north), Stadhampton (1 mile north) and Berrick Salome (1 mile south-east). Nearby towns on our patch include Oxford (8 miles north-west), Didcot (7 miles south-west), Abingdon-on-Thames (7 miles west), Thame (9 miles north-east), Wantage (14 miles west) and Henley-on-Thames (13 miles south-east).
Local landmarks in Great Holcombe
We work on buildings around The Catherine Wheel pub, among other places. Well-known places in the area include Brightwell Castle (4 miles south-west) and Littlemore Hospital (5.8 miles north-west). The countryside around Great Holcombe includes Wells Farm and Wittenham Clumps.
Common problems we fix in Great Holcombe
When a seal departs from its tested detail, the evidence no longer covers it. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are what we find most often.
Clients normally get in touch after noticing one or more of the following:
- Openings left by services added after handover
- Expanding foam used as fire stopping
- Unsealed penetrations discovered above suspended ceilings
- Open linear gaps along the top of fire-resisting walls
Office fit-outs on sites such as Monument Business Park, 2.5 miles to the east of Great Holcombe, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Comparing quotes
- Their public liability cover
- What site paperwork they can supply
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Do they follow the manufacturer’s priming guidance?