Fire Stopping in Great Bentley
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Great Bentley. Send photographs or drawings for a fixed quote.
- Fire sealant pulled out of the opening
- Improvised or mixed-product fire seals
- Unsealed joints where partitions meet the slab
Need fire stopping in Great Bentley?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
FAQs: Great Bentley
Do you cover business parks and estates near Great Bentley, such as Plough Road Business Centre?
Yes, sites like Plough Road Business Centre are within our area, along with the rest of Great Bentley. To start, just call the office on 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
What happens to BS 476 references for fire stopping in Great Bentley?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
How long before the joints can be used?
We’ll confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
Can staff carry on working while you are here?
Yes, as long as we plan it. Tell us your site hours and access windows and we’ll plan around them.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
What will the job cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we’ll price it properly.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators.
Fire stopping in Great Bentley, done properly
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow. If you’re dealing with penetration schedules that need working through and fire seals cut back for extra cables and never reinstated, we can help, whatever the surface. One point of contact handles commercial sealant work in Great Bentley from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Converted and extended buildings around places like Great Bentley can mix old and new construction, so the wall or floor a service passes through isn’t always what the drawings assume. The right product depends on the wall or floor and the services passing through, and we’ll tell you if the detail calls for something other than sealant.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Where
- Great Bentley (CO7)
- Region
- Essex
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Should maintenance staff do it?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Compartments and services around Great Bentley
Great Bentley is about 56 miles from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail.
In a building such as Church of St Mary, any service penetration through a fire-resisting wall should be sealed to the specified detail. Offices at parks like Plough Road Business Centre (less than half a mile south of Great Bentley) are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail. In a school such as Great Bentley Primary School, fire-rated sealant goes in around service penetrations where it is specified.
Great Bentley is about 5 miles north-west of Clacton-on-Sea, in Essex. If you’re looking for fire stopping in Great Bentley, we can help, as we do across Essex. We work across 644 places in Essex. Our London page has more on work in that area.
Postcode districts covered here: CO7 for service penetrations. We cover commercial and managed buildings on Station Road, Forge Lane and Moors Close. Close to Great Bentley, our area also takes in Aingers Green (1 mile south), Frating Green (2 miles north-west), South Heath (2 miles south), Thorrington (2 miles south-west) and Frating (2 miles west). Further afield, our area takes in Colchester (8 miles west), Clacton-on-Sea (5 miles south-east), Harwich (10 miles north-east), Camulodunum (9 miles west), Greenstead (6 miles north-west) and Tiptree (14 miles west).
Local landmarks in Great Bentley
We work on buildings around The Plough Inn. Great Bentley has its own railway station: Great Bentley station. For a walk, there’s Weeleyhall Wood.
Keeping the joints sound
Once the work is signed off, these steps help:
- Agree the fire-stopping specification before services go in
- Include service cupboards in routine inspections
- Put resealing into every M&E and fit-out package
- Foam or ordinary sealant is never a fire-seal repair
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
A simple record of seal locations and products helps. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.
Our process
On arrival, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before anything is cut or cleaned, and the work normally takes a single visit for a short list of penetrations, or a phased programme for a whole building. Work in places the size of Great Bentley is planned as a single visit where we can. Clear photos and measurements help us bring the right products.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Explain the parking and delivery arrangements
- Confirm the product named in the specification
- Point out any areas we must not close
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or email drawings and photos.
Read more
Surface by surface
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening.
Cables and cable bundles
Data cabling added after handover is a regular cause of open service penetrations. Openings around new cables are resealed to the detail, and we tell you if the bundle exceeds what sealant covers.
Why it’s worth doing now in Great Bentley
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is usually a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Sealant hardens, cracks and loses grip with age, UV and movement. Replacing it before it fails keeps water out.
The product called for affects the cost, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why appoint us
- Work carried out by CSCS-carded applicators
- A fixed quote before work starts
- CHAS accredited contractor
- Joints cleaned back to sound surfaces
Take a look at our cost guide and our accreditations and insurance.
When something else is needed
Honesty saves time and money. Fresh joints won’t solve:
- Signing off or certifying a building’s fire stopping
- Fire doors, dampers or other fire safety equipment
- Gaps in walls that were never built as compartment walls
Not sure which it is? You can speak to us on 01277 525 020 or send photos by email and we will tell you honestly before you book.
Surfaces we seal
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads