Washroom Sealing in Great Bentley
Our CSCS-carded applicators take on sealing in commercial washrooms, showers, kitchens and wet areas in Great Bentley. Send photographs or drawings for a fixed quote.
- Gaps where vanity tops meet the wall
- Mould spotting along silicone joints
- Urinal joints that look unhygienic
Washroom sealing across Great Bentley
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Different surfaces, different methods
Urinals and WC pans
Urinal backs, troughs and slab joints are resealed with sanitary silicone once the whole of the old bead has gone.
Showers and trays
A tray that rocks or has cracked won’t be fixed by sealant, and we’ll say so before resealing.
Washroom sealing in Great Bentley
Our washroom work covers offices, hotels, schools and colleges, leisure centres and gyms, clinics and care homes, along with staff kitchens and tea points. Product and method follow how hard each area is used and cleaned. If you’re dealing with panel joints letting water behind and a new bead over an old one coming away, we can help, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Great Bentley it comes down to the same thing: the right product in a properly prepared joint.
Around Great Bentley, washroom work usually comes one building at a time. Photos of each area help us plan the visit and bring the right sealant.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Great Bentley (CO7)
- Wider area
- Essex
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Also near Great Bentley
Other services in Great Bentley
When it isn’t the sealant
Being straight saves everyone time. Fresh joints won’t solve:
- Fittings that move too much to hold a bead
- Mould caused by poor ventilation, which will return until the extract is fixed
- Water from plumbing, not from a joint
Not sure which it is? You can phone 01277 525 020 or email drawings and photos and we’ll tell you honestly.
Joints and surfaces we work on
- Vanity units and basins
- Urinals and WCs
- Showers, trays and wet room floors
- Kitchens and tea points
- Accessible toilets and changing rooms
- IPS panels and cubicles
What we are called out for in Great Bentley
Commercial cleaning is harder on sealant than everyday use. Harsh products, abrasive pads and pressure washing break down a joint’s surface and edges, and dirt and mould then get a foothold.
If one of these sounds familiar, it’s time for a closer look:
- Sealant laid over old silicone and now peeling
- Black mould inside silicone joints that cleaning can’t shift
- Panel joints letting water behind
- Shower tray joints that have opened up
Schools such as Great Bentley Primary School have toilets, changing rooms and kitchens that are best resealed in the holidays.
What to look for in a quote
- How they’ll work around occupants
- Which product they’ll use, and why it suits the joint
- Whether primer will be used where the manufacturer specifies it
- How they handle RAMS and site documents
Our process
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. If neighbouring businesses or buildings around Great Bentley need work too, visits can be combined. Mention the building’s opening times and we’ll work within them.
- We inspect each washroom and record the joints to be resealed.
- You get a fixed quote with the phasing plan.
- Old sealant is removed completely and the faces cleaned.
- Joints are degreased and dried.
- New anti-mould sealant goes in and is tooled neat.
- Rooms reopen after the cure time.
Getting the site ready
- Tell staff and tenants when we’ll be in
- Point out parking and an unloading spot
- Send any specification or drawings in advance
Quotes
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to call 01277 525 020 or email us.
Read more
Toilets, showers and kitchens around Great Bentley
Great Bentley is about 56 miles from central London, within the office belt around the capital. Office washrooms on business parks see heavy weekday use, so we work a block of facilities at a time.
For a hall at a building such as Church of St Mary, resealing the kitchen and toilets can be fitted between bookings. Office toilets at parks like Plough Road Business Centre, less than half a mile to the south of Great Bentley, take steady weekday use, and mouldy silicone soon shows.
Great Bentley is about 5 miles north-west of Clacton-on-Sea, in Essex. We cover commercial sites throughout Great Bentley. Our Essex coverage takes in 644 places, large and small. London is covered too, around 56 miles from Great Bentley.
Business premises anywhere in CO7 are within our area for washrooms and wet areas. For a building on Station Road, Forge Lane and Moors Close or nearby, send details and we will quote for washrooms and wet areas. Just outside Great Bentley, we also work in Aingers Green (1 mile south), Frating Green (2 miles north-west), South Heath (2 miles south), Thorrington (2 miles south-west) and Frating (2 miles west). A short drive away, we cover Colchester (8 miles west), Clacton-on-Sea (5 miles south-east), Harwich (10 miles north-east), Camulodunum (9 miles west), Greenstead (6 miles north-west) and Tiptree (14 miles west).
Local landmarks in Great Bentley
Recent enquiries here include premises near The Plough Inn. There’s a railway station in Great Bentley itself: Great Bentley station. The countryside around Great Bentley includes Weeleyhall Wood.
Questions we’re asked in Great Bentley
Must every washroom in our Great Bentley building shut while you work?
Typically only some of them, for a short time. We work in phases so other facilities stay open. Sanitary silicone needs time to cure before the area is used, and we’ll tell you how long for the product used.
Is Great Bentley too small for you to travel to?
Not at all. Great Bentley is within our area. London and every South East county are within our area. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
How do I request a quote?
You can use the quote form on this site; alternatively, call 01277 525 020 or use the quote form. Photos, drawings or a joint schedule help us quote quickly.
How many days will you need on site?
The duration is planned around your programme and the access we are given. You will have an expected duration with the quote.
Can you work to our specification?
Yes. Send it with your enquiry, and the quote will be based on it.
What will the job cost?
There isn’t a price list, as every site differs. Send photos or drawings and we will price it at a fixed figure.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
How the quote is worked out
We price every job individually. The things that drive the figure:
- Access and working height
- The product specified
- Whether old sealant has to be cut out first
- Quantities, in metres or numbers
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
Before you send an enquiry
It doesn’t need to be a full survey. These details are enough to start:
- Photos of the joints, close up and from further back
- Rough lengths or quantities, or drawings if you have them
- The site address and postcode
- The asbestos register, for older buildings
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to give us a call on 01277 525 020 or email the details over with what you know.
Doing it in-house
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.