Fire Stopping in Gladsmuir
Looking for fire stopping in Gladsmuir? It’s simple: send details, get a quote, we seal, guaranteed.
- Damaged fire seals in risers and voids
- Penetration schedules that need working through
- Non-fire-rated filler around services
Fire stopping for businesses in Gladsmuir
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Do you need fire stopping in Gladsmuir?
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Deflection and building movement can open these gaps, and a product not tested for that movement may crack. Linear joint details set a width range and movement capability, and the seal has to sit within them.
It’s worth sending us details if you spot any of the following:
- Seals disturbed by maintenance and left open
- Expanding foam used as fire stopping
- Improvised or mixed-product fire seals
- Service penetrations left open after M&E works
For a unit at a site such as Macmerry Industrial Estate, which lies west of Gladsmuir, new power or data runs between office and warehouse can breach a compartment wall.
Before you book anyone
- Their pre-qualification and accreditations
- The named product and why it was chosen
- Whether old or failed sealant will be cut out, not overlaid
- How they handle RAMS and site documents
Fire stopping in Gladsmuir, done properly
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and we say so if it doesn’t fit. We work on service gaps in risers, pipe penetrations and cable penetrations, and the failures we’re asked to look at most are openings found when ceilings come down for a refit and fire-stopping items raised at inspection or handover. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Gladsmuir is the same: the right product in a properly prepared joint.
Travel to smaller places like Gladsmuir is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Location
- Gladsmuir (EH33)
- Wider area
- East Lothian
- Cover
- 12 months on every job
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Common questions from Gladsmuir clients
Is Gladsmuir too small for you to travel to?
Not at all. Gladsmuir is within our area. Our area covers all of Scotland, cities, towns and islands alike. Good photographs up front let us bring everything on the first visit.
Will you take on work at estates like Macmerry Industrial Estate, close to Gladsmuir?
Yes. Estates, retail parks and business parks around Gladsmuir, Macmerry Industrial Estate among them, are all within reach. A few photos and the unit address let us price the work.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Can you tell us what fire stopping our building needs?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
Who decides which product is used?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Compartments and services around Gladsmuir
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
At a healthcare site like East Lothian Community Hospital, 2.6 miles east of Gladsmuir, new services through compartment walls are a constant, and each needs the specified seal. For a building such as Gladsmuir Parish Church, new heating or data runs are the usual reason penetrations need sealing.
Gladsmuir is about 3 miles west of Haddington, in East Lothian. Anywhere in EH33, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 48 places in East Lothian, large and small. There’s a separate page for Edinburgh, about 13 miles away.
Anyone looking for fire stopping in EH33 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Access to Gladsmuir is via the A199 among other routes. Close to Gladsmuir, our area also takes in Macmerry (2 miles west), Longniddry (2 miles north-west), Dovecote (3 miles east), New Winton (3 miles south-west) and Easter Pencaitland (3 miles south). Bigger towns within reach include Musselburgh (7 miles west), Dunbar (14 miles east), Tranent (4 miles west), North Berwick (9 miles north-east), Prestonpans (5 miles west) and Cockenzie and Port Seton (4 miles west).
What’s near Gladsmuir
For rail, the closest station is Longniddry station, roughly 2.1 miles north-west. Nearby you’ll also find John Gray Centre Museum (3.3 miles east) and Seton Palace (2.9 miles west). Green spaces nearby include Marl Loch and Skid Hill.
When it isn’t the sealant
We check first that sealant really is the fix. It isn’t the answer for:
- Walls or floors that aren’t fire-resisting to begin with
- Fire doors, dampers or other fire safety equipment
- Designing or specifying fire stopping, which sits with the designer or fire engineer
Not sure which it is? You can give us a call on 01277 525 020 or use the quote form and we’ll tell you honestly before you book.
Where we work in Gladsmuir
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
What affects the price in Gladsmuir
To price the job, we consider:
- Phasing around occupants
- Site requirements such as inductions and permits
- Which sealant the job calls for
- Access and working height
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we’ll explain how it’s made up.
What to include in your enquiry
For an accurate fixed quote, we need to understand the site. Send us:
- Anything awkward about access or site hours
- A wide shot and a close-up of the area
- Any dates the work must fit around
- Where the site is, with the postcode
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, give us a call on 01277 525 020 or send photos by email.
Towns and villages near Gladsmuir
More services for Gladsmuir
From enquiry to sign-off
Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Travel to smaller Scottish places like Gladsmuir is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. External joints need a dry spell as well.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Tell us what induction or permit system the site runs
- Clear stock, furniture or equipment away from the joints
- Send your site hours and access windows
Ask for a quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to speak to us on 01277 525 020 or send details through our quote form.
Read more
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
After the work
Cleaning and maintenance staff play a part too. Share these points with them:
- Ask which product is in place before decorating
- Don’t let anyone top up a fire seal with the wrong product
- Treat an open penetration as a priority repair
- Get seals inspected before ceilings and boxing close
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t, and the data sheet says which.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match.