Fire stopping in Fulking
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Fulking. Send photos or drawings for a fixed quote.
- Fire-stopping items raised at inspection or handover
- Hidden openings found during inspections
- Head-of-wall gaps with no fire seal
Need fire stopping in Fulking?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Owners, agents and contractors
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Fulking can form part of a wider programme.
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Fire stopping in Fulking, done properly
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. We close the openings listed on your schedule, using the specified sealant and detail. We work on small duct penetrations where the tested detail allows, pipe penetrations and linear gaps at wall heads, and what we’re called in for most is head-of-wall gaps with no fire seal and non-fire-rated filler around services. A specialist sealant contractor works differently from a general builder: in Fulking, that means joint design, primers and backing rod as standard.
Around smaller places like Fulking, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Location
- Fulking (BN5)
- Wider area
- West Sussex
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Where services cross fire walls in Fulking
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail. Fulking is about 42 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
Large healthcare estates like Southlands Hospital (to the south of Fulking) change their services often, so penetration seals are worth checking after M&E work. For a unit at a site such as Mackley Industrial Estate (2.2 miles west of Fulking), new power or data runs between office and warehouse can breach a compartment wall.
Fulking is about 4 miles north-west of Brighton and Hove, in West Sussex. Businesses, contractors and managing agents in Fulking use us for work on service penetrations. Across West Sussex, 373 places are covered, including Fulking. Our Brighton page has more on work in that area (6 miles or so).
We take on service penetrations across the BN5 postcode area, whatever the building. Close to Fulking, our area also takes in Poynings (1 mile north-east), Hangleton (3 miles south), Castle Town (3 miles west), Portslade (3 miles south) and Kingston by Sea (4 miles south). A short drive away, we cover Crawley (15 miles north), Horsham (13 miles north), Worthing (9 miles south-west), Haywards Heath (9 miles north-east), Burgess Hill (6 miles north-east) and Littlehampton (14 miles west).
Around Fulking
Around Fulking, our work takes us to commercial buildings near The Shepherd And Dog Public House, among other places. Fulking’s nearest station is Portslade station, roughly 3.9 miles south. A little further out are Clayton Castle (3.7 miles east) and Southlands Hospital (3.7 miles south). Not far away are Truleigh Hill and Woods Mill.
Do you need fire stopping in Fulking?
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps, and a product not tested for that movement may crack. The tested detail for a linear joint states the width and movement it covers.
What tends to prompt an enquiry:
- Open linear gaps along the top of fire-resisting walls
- Non-fire-rated filler around services
- Old intumescent sealant that has split away
- Openings left by services added after handover
In a building such as The Church of the Holy Trinity, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Before you book anyone
- Is the sealant right for the movement and the substrate?
- Health and safety accreditation such as CHAS
- Who will actually carry out the work
- Whether old or failed sealant will be cut out, not overlaid
Cost factors for service penetrations
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Quantities, in metres or numbers
- Joint width, depth and condition
- How much existing material needs removing
- Location, for remote and island sites
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Sending details for a quote
The more we know, the firmer the quote. Helpful details to send:
- The product your specification calls for
- When you need the work done
- Clear photos of the problem areas
- Drawings or a marked-up plan, if available
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Towns and villages near Fulking
Also in Fulking
After the work
For the best life from the joints:
- Ask the designer to confirm details early on refits
- Look above ceilings when tiles are lifted for other jobs
- Flag new cables with no seal around them
- Put resealing into every M&E and fit-out package
Don’t patch a fire-rated seal with anything outside its tested detail. Repairs need the same product and detail as the original, or a new specification from the designer.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and the work runs in step with the M&E.
From enquiry to sign-off
Before we leave any area, we remove the tape, clean down and inspect every joint. If an area should be left alone while the sealant cures, we say how long and put signs out. Jobs in and around smaller places like Fulking are usually planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Send any specification or drawings in advance
- Share your working hours and any access restrictions
- Tell us which areas need to stay in use
Quotes
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Advice
Should maintenance staff do it?
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Fulking: questions and answers
Is Fulking too small for you to travel to?
Not at all. Fulking is within our area. London and every South East county are within our area. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
What does the BS 476 change mean for fire-rated sealant in Fulking?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Can you work while the building is occupied?
In the majority of cases, yes. We phase the work so most of the building stays in use, with each area protected and signed.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.