
Fire-rated sealing and fire stopping in Frogmore, Hampshire
Fire stopping in Frogmore, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Penetration schedules that need working through
- Expanding foam used as fire stopping
- Head-of-wall gaps with no fire seal
Fire stopping across Frogmore
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Diagnose, treat, sign off
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed before the next one starts. For a job in Frogmore, the main thing is a clear picture of the work. You will then get a fixed price for the work.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Point out any areas we must not close
- Share your working hours and any access restrictions
- Warn occupants and staff about the work
Getting a fixed quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Related advice
Fire stopping in Frogmore
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it. Where there isn’t one, the designer or fire engineer needs to set one first. If you are dealing with fire-rated sealant that has cracked or shrunk back and unsealed openings around new pipes and cables, we can put it right. Whoever orders the work in Frogmore, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.
Fire-rated sealing in a place like Frogmore is typically a single building at a time. Send the specification, drawings or photos of the openings and we’ll quote to suit.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Location
- Frogmore (GU17, GU47, GU46)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026

Towns and villages near Frogmore
Other services in Frogmore
Different surfaces, different methods
Plastic pipes
Waste and drainage pipes through floors are a frequent case. Whether sealant alone is acceptable depends entirely on the tested detail.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. If the gap exceeds the tested range, sealant alone won’t do, and the detail may call for board patching or another product.
Your questions answered
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Frogmore?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Does your area include sites such as The Meadows Business Park, near Frogmore?
Yes. Our area takes in Frogmore and its surroundings, with estates and business parks such as The Meadows Business Park included. Send details of the unit and the work through our quote form for a quick quote.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Do you cover Frogmore?
Yes. Sites across Frogmore are covered, and the same phone number covers every area.
Can you quote from photographs?
That depends on the size and complexity of the job. Straightforward work can often be priced from photographs and measurements, and bigger or more complex jobs usually get a visit.
What happens if old sealant might contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Fire-rated sealing for Frogmore buildings
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. We install whatever has been specified, to the product’s tested detail. Frogmore is about 32 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
Workshops and IT rooms at colleges like The Sixth Form College Farnborough (2.7 miles south-east of Frogmore) are re-serviced often, leaving penetrations to seal. Holiday works at schools like Frogmore Junior School often leave service openings to seal before pupils return. Office fit-outs on sites such as The Meadows Business Park, 0.8 miles to the east of Frogmore, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Frogmore is about 1 mile south-west of Sandhurst, in Hampshire. Anywhere in GU17, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Across Hampshire, 723 places are covered, including Frogmore. Sites around Reading have their own page, about 11 miles away.
Postcode districts covered here: GU17, GU47 and GU46. If your site is on Bell Lane, Green Lane and Reading Road or close by, we can quote for service penetrations. Close to Frogmore, our area also takes in Blackwater (1 mile east), Hawley (1 mile south-east), College Town (1 mile north-east), Sandhurst (1 mile north-east) and York Town (2 miles east). Bigger towns within reach include Basingstoke (14 miles west), Farnborough (3 miles south-east), Fleet (5 miles south-west), Aldershot (6 miles south), Alton (15 miles south-west) and Tadley (15 miles west).
Near you in Frogmore
In Frogmore, that means premises near White Swan pub, Frogmore Community College and Sandhurst Memorial Park and the streets around them. The closest station to Frogmore is Sandhurst station, about 0.8 miles north of the centre. A little further out are Staff College Museum (2.1 miles east) and Frimley Park Hospital (2.6 miles south-east). The countryside around Frogmore includes Horseshoe Lake and Wildmoor Heath.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
General trades versus a specialist
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Maintenance after handover
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Ask which product is in place before decorating
- Settle who seals which penetrations at the start of a project
- Keep product data and details in the fire safety file
- Put resealing into every M&E and fit-out package
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t, and the data sheet says which.
Specify fire stopping early on refits, not as an afterthought. The designer can then choose details that suit the services planned.
Quoting for work in Frogmore
A fixed quote reflects the actual work. It takes account of:
- Quantities, in metres or numbers
- Location, for remote and island sites
- Specialist products, such as fire-rated or hygienic sealants
- Removal of failed or old sealant
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Before you send an enquiry
Diagnosis starts before we arrive. Tell us:
- Where the site is, with the postcode
- Specification clauses that apply
- Any dates the work must fit around
- The type of building and who uses it
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, call the office on 01277 525 020 or email a schedule or drawings.