Frimley Green fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps in Frimley Green. CHAS accredited and fully insured, with a 12-month guarantee.
- Unsealed penetrations discovered above suspended ceilings
- Unsealed joints where partitions meet the slab
- Fire stopping installed outside its tested range
Need fire stopping in Frimley Green?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our fire stopping in Frimley Green
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings and the specified product data. Tell us what records you need and we’ll confirm with the quote. If you are dealing with hidden openings found during inspections and expanding foam used as fire stopping, we can put it right, whatever the surface. Looking for mastic applicators who cover Frimley Green? We have been sealing commercial buildings since 2005.
In places the size of Frimley Green, fire-resisting walls and floors are found in schools, care homes, health centres and mixed-use buildings. Around those penetrations, fire-rated sealant is installed if specified, with depth, backing and gap all as tested.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Frimley Green (GU16, GU14)
- Region
- Surrey
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Service penetrations in Frimley Green buildings
There are plenty of hotels within about 2 miles of Frimley Green. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. Three care or nursing homes sit less than 2 miles from Frimley Green. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. We install fire-rated sealant to the tested detail where it is specified.
In a building such as Church of St Andrew, any service penetration through a fire-resisting wall should be sealed to the specified detail. Colleges such as The Sixth Form College Farnborough, 1.1 miles west of Frimley Green, add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product.
Frimley Green is about 1 mile south of Frimley, in Surrey. Frimley Green sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 379 places in Surrey, from busy centres to rural villages. Sites around Reading have their own page, about 15 miles away.
We take on service penetrations across the GU16 and GU14 postcode area, whatever the building. Streets here include Cross Lane, Sturt Road and Beech Road, and sites on any of them can send details for a fixed quote. We also cover Frimley (1 mile north), Deepcut (1 mile north-east), Watchmoor (2 miles north-west), Camberley (2 miles north) and York Town (3 miles north-west) for service penetrations. A short drive away, we cover Guildford (8 miles south-east), Woking (7 miles east), Farnham (7 miles south-west), Egham (12 miles north-east), Walton-on-Thames (15 miles east) and Staines-upon-Thames (13 miles north-east).
Local landmarks in Frimley Green
Around Frimley Green, our work takes us to commercial buildings near National Aerospace Library, Prince of Wales pub and Henry Tyndale School, among other places. Other local landmarks include Sixth Form College (1.1 miles west) and Frimley Lodge Park (less than half a mile south-east). Frimley Green’s nearest station is Farnborough North station, roughly 0.5 miles west. Well-known places in the area include Frimley Park Hospital (1.3 miles north) and Royal Army Dental Corps Historical Museum (2.4 miles south). Not far away are Danger Hill and Aunt's Pool.
Honest limits
Being straight saves everyone time. Fresh joints won’t solve:
- Reviewing a building’s overall fire safety
- Large openings beyond what any sealant detail covers
- Signing off or certifying a building’s fire stopping
If you’re not sure, just give us a call on 01277 525 020 or email a schedule or drawings and we will give you a straight answer before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
Other services in Frimley Green
Our process
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence, and we clear our waste as we work. For a job in Frimley Green, the main thing is a clear picture of the work. A fixed quote follows.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Send your site hours and access windows
- Agree which areas must stay open
- Let building users know which areas are affected
Get a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, give us a call on 01277 525 020 or send photos by email.
Advice
Do you need fire stopping in Frimley Green?
Plenty of openings were simply never closed because they sat out of sight above a ceiling or inside a riser. Inspections, refurbishments and ceiling access normally bring them to light.
Things that usually lead to an enquiry:
- Unsealed joints where partitions meet the slab
- Openings left by services added after handover
- Fire-rated sealant that has cracked or shrunk back
- Snag lists that include open service penetrations
On a hospital site such as Frimley Park Hospital (1.3 miles north of Frimley Green), fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
What your quote should include
- Health and safety accreditation such as CHAS
- Which product they’ll use, and why it suits the joint
- Whether primer will be used where the manufacturer specifies it
- Can the work be phased to keep areas open?
Questions about Frimley Green
Is a smaller place like Frimley Green outside your area?
No. Small places get the same service as large ones. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
What happens to BS 476 references for fire stopping in Frimley Green?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, and you deal with one contact throughout.
What will the job cost?
That depends on the job: quantities, access, the product and any phasing. Call for a quote and we’ll price it properly.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Cost factors for service penetrations
The price varies from site to site. It mainly depends on:
- The site’s rules and procedures
- Phasing around occupants
- How much existing material needs removing
- Access and working height
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Before you send an enquiry
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Approximate linear metres or a joint schedule
- How the joints are reached, and at what height
- The type of building and who uses it
- The asbestos register, for older buildings
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Maintenance after handover
Problems stay small when the joints are checked regularly. In particular:
- File the specified details where the next contractor can find them
- Don’t let anyone top up a fire seal with the wrong product
- Include service cupboards in routine inspections
- Put resealing into every M&E and fit-out package
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged, and report them promptly.
A simple record of seal locations and products helps. When a new service goes through, everyone knows which product and detail to match, which saves guesswork.
Why deal with it now?
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, and doing it once, properly, is cheaper. Small buildings around Frimley Green suffer from failed joints as much as large ones. Catching it early means a reseal rather than repairs.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What you get with us
- Health and safety: CHAS accredited
- Work carried out by CSCS-carded applicators
- Constructionline member for supplier checks
- Work to your specification and the manufacturer’s guidance
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.