Eastry fire stopping
Planning work on a service penetration in Eastry? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Head-of-wall gaps with no fire seal
- Non-fire-rated filler around services
- Fire seals cut back for extra cables and never reinstated
Need fire stopping in Eastry?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When it isn’t the sealant
Honesty saves time and money. New sealant won’t cure:
- Gaps in walls that were never built as compartment walls
- Plastic pipes whose detail calls for a collar or wrap
- Writing the fire-stopping specification
If in doubt, give us a call on 01277 525 020 or use the quote form and we’ll say what we think.
Where we work in Eastry
- Linear gaps at wall heads
- Service gaps in risers
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
Fire stopping in Eastry
Most of our fire stopping work happens after the building is up. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, and they are easy to forget. Those on your schedule are closed with the specified product. The enquiries we see most involve damaged fire seals in risers and voids and openings left by services added after handover, on service gaps in risers, small duct penetrations where the tested detail allows and pipe penetrations. A specialist sealant contractor works differently from a general builder: on jobs in Eastry, preparation and product choice get the time they need.
In places the size of Eastry, fire-resisting walls and floors are found in schools, care homes, health centres and mixed-use buildings. Around those penetrations, fire-rated sealant is installed if specified, with depth, backing and gap all as tested.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Where
- Eastry (CT13)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Towns and villages near Eastry
Other services in Eastry
Our process
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before anything is cut or cleaned, and the work normally takes a single visit for a short list of penetrations, or a phased programme for a whole building. What matters most for a job in Eastry is a clear list of what needs doing, so send photographs of each area. You will then get a fixed price for the work.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Let us know about inductions and permits
- Arrange parking or a loading space
- Move anything stored against the joints
Get a fixed quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, ring 01277 525 020 or send photos by email.
Related advice
When to call us in Eastry
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps, and the wrong product can split as a result. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Typical triggers for a call:
- Fire stopping installed outside its tested range
- Head-of-wall gaps with no fire seal
- Non-fire-rated filler around services
- Seals disturbed by maintenance and left open
On a site such as Birnham Farm Business Centre, 1.2 miles north-west of Eastry, every fit-out that runs new services through a compartment wall leaves penetrations to seal with the specified product.
Before you book anyone
- Whether old or failed sealant will be cut out, not overlaid
- The terms of the workmanship guarantee
- What level of public liability insurance do they hold?
- Their plan for phasing and protecting the area
Questions about Eastry
Will you take on work at estates like Birnham Farm Business Centre, close to Eastry?
Yes. We cover Eastry and the area around it, including industrial estates, business parks and retail parks such as Birnham Farm Business Centre. A few photos and the unit address let us price the work.
Is Eastry too far out for you?
No. Places such as Eastry are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Are you members of a third-party fire-stopping installer scheme?
No, and we won’t imply otherwise. Some clients require third-party installer schemes even though the law doesn’t, so it’s worth checking what your contract says. If it doesn’t require one, we can install the specified fire-rated sealant to its tested detail.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
Does weather matter for sealant work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Is the BS 476 change in 2029 relevant to fire stopping?
From 2 September 2029, Approved Document B in England drops its references to BS 476 classes. After that, the European classification under BS EN 13501-2 is the route. Your designer will choose products with the right evidence.
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Penetration seals near Eastry
In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Central London is about 63 miles from Eastry. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
For a building such as Church of St Mary the Virgin, new heating or data runs are the usual reason penetrations need sealing. Schools such as Eastry Church of England Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Eastry is about 4 miles north-west of Deal, in Kent. We cover Eastry and the rest of Kent, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Kent, 931 places are covered, including Eastry. There’s a separate page for London, about 63 miles away.
We cover the CT13 postcode districts. Among the streets we cover are High Street, Swaynes Way and Wheelwrights Way. Nearby places we also cover include Buttsole (1 mile south), Statenborough (1 mile north-east), Ham (1 mile east), Woodnesborough (1 mile north) and Felderland (1 mile north-east) for service penetrations. Bigger towns within reach include Canterbury (10 miles west), Margate (10 miles north), Dover (7 miles south), Folkestone (13 miles south-west), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
What’s near Eastry
In Eastry, that means premises near Ham Fen, The Bull Inn And Rear Courtyard and Sandwich Technology School, among other places. The closest station to Eastry is Sandwich station, about 2.3 miles north-east. Well-known places in the area include White Mill (2.5 miles north) and Sandown Castle (4.2 miles east). The countryside around Eastry includes Monk's Wall nature reserve.
Maintenance after handover
Once the work is signed off, these steps help:
- Include service cupboards in routine inspections
- Keep general-purpose fillers away from compartment walls
- Brief every trade that openings they make must be sealed
- File the specified details where the next contractor can find them
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way unless the designer specifies otherwise.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, and it helps at inspections.
Why it’s worth doing now in Eastry
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first, and the other benefits follow. Small buildings around Eastry suffer from failed joints as much as large ones. Catching it early means a reseal rather than repairs.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
Why us?
- Clear, fixed quotes
- CHAS accredited contractor
- CSCS-carded applicators
- Work to your specification and the manufacturer’s guidance
Take a look at what affects the cost or how we’re accredited.